Now do it on the 1.5 Ecotec 😅😅😅

I need to do this but mine is a 2020 malibu L

Found this yesterday looking for how to remove my door to install new speakers, great video!

Merhaba, teşekkür ederim benim uyguladığım yöntemde sağdaki mekanizma üstten değil alt kısmındaki tırnakları sıkarak sağa doğru çıkarmak. Bu şekilde geri kapatmak çok daha kolay.

I saw you said a code can be given with a spark plug being bad. Here's my issue. I have. 2010 Malibu that gets power but won't start. It doesn't crank, click, nothing. It seems to start better when it's cool outside or has been sitting for 3-4 hours. We have replaced battery, the starter, ignition switch, both battery cable that attached to terminals, several fuses, starter relay. Our last option was to take it in and see if someone could find an exposed wire. When I told a friend, she said it could be the spark plugs. "If it's to hot and a spark plug is bad the engine won't start or crank." Her words. I was going to change them tomorrow but if a code actually appears for these to be messed up then I could b wasting my money

Thank you !!!!!!!

Good 😊

I'm in the process of installing an LS3 into a 71 Olds Cutlass Supreme convertible. I was wondering what motor mounts and bracket on the frame you used. I have and LS sliding motor mount but I'm having a heck of a time getting it to go down on the stock clamshell motor mount brackets on the frame. From your video, yours looks to position the engine forward on the frame.

Just recommend peeps use anti seize compound on the valve stem threads when putting on an aluminum valve stem cap. But if you didn't do that occasionally, you end up with this video. I will say using the vice grips is a 50/50 proposition too much squeeze and you ruined the valve stem schrader valve assy anyway. Additionally use a 10mm or so wrench 6 flat wrench "not 12" , on the cap to remove after using the Dremel. You still have 5 flats left on the cap to use. And more torque. and control as well. This idea of using channel locks is back yardish mechanics. But sometimes its your only choice. It shouldn't be your first choice.

😮😮

Very good video clearly explained my friend.can I just say,these probes are great for finding ball park yes/no areas but my experience has taught me they sometimes cause confusion when the probe says bulbs and fuses are good but after a volt drop test they've proved faulty and this applies to the bad earth scenario. I always double check with the multimeter if I find a bad suspected poor earth etc but yes,this is a mighty fine video mate🇬🇧👍🏻

Is this for the 1.4L or the 1.8L?

Tip: Leave a nut or screw in when you tap them off, to keep parts from pounding to the floor.

Hi. I have to replace the back up camera on my 2017 F150 (tailgate handle) and have been looking for a video on how to but can’t find anything. I am only replacing the camera. Do you have anything showing how to do it?

Thank you! My first time replacing my signal light bulb with your help❤

The c- hr build in turkey don't have plastic tray and use different filter Edit: if filter said air flow and have arrow make sure the arrow pointed down because air flows downward. If don't say air flow but have arrow then install arrow pointed up ⬆️

How may hours did this take?

One of the best videos I've seen in a long period of time. Great job and making it simple to work with.

You put too much in there is a very small line where it should be when it’s cold and just a little bit above that a large line with arrows pointing to it that’s where it should be when it’s hot Looks like U went past both lines you should have filled it to the very small bottom line

You were taught well I've been doing my own brakes since I was a teenager im54 now my grandfather taught me excellent work sir 👍👍👍👍👍👍

I cleaned this twice and it didn't fix the issue. Any other fixes?

how difficult is to do with the engine in the car?2012 chev impala? Probabaly bank 2 head gasket as well

Thank you Chad, made it quick an to the point. I'll be doing this today on my Grand am 😁

You didn't mix water with your coolant??? Just pour it straight in????

This is such a great educational video. I was able to replace my valve cover on my own in about an hour and a half. (I'm a nanny, not a mechanic 😂) I like to work on cars and if I can do the work myself, I try too. You did a great job explaining everything! ONLY things I got caught up on, was taking the left side piece off that holds hoses, and the oil filler. Both held me up bc I hadn't messed with either before. But I figured it out! Thank you for making this video and listing the parts used. It was such a huge help to use "youtube-university" lol

I have a 2005 255,190 miles and runs great. Want to restore it though.

Kyle is ready to fight the matrix Good on you Kyle

I think the instructions are incorrect for setting the timing

Does the valve cover have any specific torque wen putting it back on or do u just tighten it

My harmonic balancer bolt want come out. It just moves my timing chain when I try and get it out

thank you ......all i can say i was stumped

Very helpful, thanks, Did you do thins because you have low engine vacuum? How much vacuum do you have, I only have 14" of vacuum and my brakes are crap. Cheers

How about the book number or link to the bulb instead of Al the links to buy crap we don’t need from your store?

Going through the trouble of removing an engine and disassembling front of it, but not going through the trouble of getting oem parts and instead ordering on Amazon. Absolutely asinine. Good thing you know how to do that job cause it won’t be the last time lol

I have this problem in my Cruze. Is it possible to only replace the diaphragm instead of all of the head? I bought the replacement diaphragm do I need to buy all of it ?

Gracias por subir este video. Tengo una Ford escape y se detecto el mismo problema. Slds desde chile.

Excellent idea, keeping the hinges regularly greased makes a world of difference , I do have a small welder and plan on trying this method. Originally I was going to go with the nut , bolt and washers and eliminate the junk bushings all together by drilling larger holes and using 6inch bolts but thinking of trying this, sure wish you had the step by step video lol, I appreciate it, thanks

Can you please sent torque specs for 2009 Toyota Corolla S 1.8 L engine timing chain replacement torque specs

I have a 2.2 with close to 300k, Chain kit installed at 245k, still was original chain and tensioner. These are good little motors IF YOU TAKE CARE OF THEM!!!! so change that oil!!!

IT WOULD MAKE SO MUCH MORE BETTER SENSE TO ) NOT) BUY THAT PIECE OF SH-T ENGINE IN THE FIRST PLACE.

What code will show if this is the problem?

Why didn't you grease it? You didn't attach the knipple and grease it up. Moog must be greased during install. I just put the same ones on and they come with small amount of packing grease but need filled up on install. Attach the knipple pump it full of grease, put on the vehicle and grease again just in case you lost some on install. You just installed an empty ball joint with no grease bud, that rubber boot should be inflated with grease.

The cord on the lever inside has come loose is there an other way to open hood

Does anyone know if there is a timing camshaft locking tool?

Brother, thank you. Saved me a ton of money, & a new door.

I have a 2014 cruze 2nd owner and first time adding freon. Its blowing hot air and I never added any in 8 years so I assume it empty. it started blowing warmer air last summer. Bought a bigger can with gauge followed exact direction and the needle is buried in the red. Is this normal or do I need to go get it serviced? no clue why the compressor or system would be faulty now. thx

Very helpful but it said 50/50 half been distilled water but you didn't put water, why not?

Dude your a lifesaver 😜✌️

Helpful, thank you. You make it look deceptively easy.

Try turning the right way, you were tightening it. Not unless you mirror immaged the screen.