My directional rocker switch on this shredder is stuck in reverse after a side branch got forced down into the switch. It’s good to get an idea of the insides before I tackle it tomorrow!

Thank you. Saved 200 + courier by following your helpfull video. Mine was overflooding when in hi speed due to blockage in the tank exit from dust accumulation. Thanks again.

Cheers that was very helpful 🙏

My solution. I stuck the compressor into an old fridge. You can keep the door a bit open for ventilation.

great info. i will tear one apart and make a airconditioner on /off controller by using relay pins.( i will design a simple plastic case to 3d print)

Mine has problem with turning on/off. You can hear relay clicking but not strong enough.

This worked for me thanks man, I can't believe NVIDIA purposely makes it harder for their own customers for no reason. Thanks again, you're a lifesaver

When it’s empty with no air, you turn it on and it runs for approximately two minutes, does it get hot with the top on ?

You're are an absolute star. I was about to bin my shredder but saw this and managed to fix the same fault, saving me £160. Love the non-verbal narration, the excellent photography, and few subtitles made the video easy to understand without an annoying commentary. I can't thank you enough, made an old man ruddy happy. Cheers

Hi, can u tell plz where can i find the mid spot and knob for my controller?

I followed instructions and it worked fine. I had a leak and fixed it. The problem is that the leak came back after 10 days or so and although I follows the same steps, now it won’t turn on. It gives me this exclamation mark when I turn it on. Any ideas?? I really need it to work in a few hours. Any help would be appreciated. I have double checked the cabling and I have reconnected everything perfectly. God knows what’s the problem. Edit: thanks so much for the video anyways. 🙏🏻

hello my tapo link c200 got blurry after i try to remove plug and back again please heelp

Thanks for the video. Mine is completely dead, looks like power is going to the machine but none of the LEDs light. Is there an internal fuse?

Full sealant and you have an ip66 exterior plug

O download da firmware da minha câmera tapo C200 falhou e agora a minha câmera não quer mais funcionar. Ela está com as luzes infravermelhas acesas o tempo todo, por acaso você sabe como resolver esse problema?

Stopped working before the update

For the bottom door I can see you remove the white plastic bit, flip it over and refit it on the opposite side, simples. It for the top door I don’t see you do anything with the black (black on mine at least) door stopper….did this also just flip over or do I need a different stopper? I’ve lost any parts or instructions that may have come with the fridge. Cheers

Won’t the device turn itself off after a while because it thinks it has drained the battery?

awesome, thanks

Surely this will encourage the Compressor to overheat?!!

its not installing whats the problem? edit: Now its working.

If only more KZbinrs followed your example and produced videos with no waffle as you did here. Straight to the point. This is how it works. This is what you need. This is the result. Simple.

So in November 2024 nvidia is telling us to install the latest driver due to major security vulnerabilities. so if we use your method, does the 'driver only' by itself installation solve the security issues, or is geforce experience also required in order to actually solve the security issues? don't want to learn the hard way and can't find any clear answer so far.

how do you update your drivers with this method?

Can i do with rtx without having Nvidia rtx gpu?

Thanks for the helpful video, had no idea how to get into the thing to start with. Sneaky buggers hiding the screws under the sticky label!

Thank you!

Does this apply to ebikes without a throttle?

awesome mod, i would put a tractor flap on it just for the lols!

Thank you! I spent yesterday stripping ours. . ( IT WORKED) watched you brilliant vid this morning. . . Wish I'd done that the other way round! Doh!! 😂

You're awesome

Pretty sure the switch is stuffed on my Al-ko I found in hard rubbish. Good to see you working through the troubleshooting process though. Gives me some more ideas!

hahah thats awsome that saw rips!

Looks identical to a dead macallister I got from a friend . I will try your fix. Fingers crossed !!!

To anyone thinking about buying this fridge, I'd say dont bother. It worked OK for about a year. Then a sensor broke on it 1 week before its warranty ran out. They replaced it. And now it frosts up and the temp sensor in the fridge gets covered in ice because its mounted to the evaporator in the fridge (the cold part), which tricks the fridge into thinking its cold = the fridge thinks its cold = doesn't kick in the compressor = doesnt stay cold = the rest of your fridge temperature will raise to dangerous levels (12'c) I've had to take it apart and defrost it about 6 times now and I'm sick of it. Door seals are fine. No obvious leaks. Design flaw personally, having the temperate sensor mounted to the evaporator (which will obviously get covered in ice) is bad design imo. I'm thinking of relocating it off the evap.

Thank You!

LOGITECH Extreme 3D Pro of me is problem on Aileron control. I already removed all part and see the potentiometer as the same your on this clip. Do you think 100K ohm and 300degree can get or not?.

What model carb is this? Where did you buy it, I need one

Have one here bought on return goods. But turns out it isn't working. Does connect and switch by app or side button but doesn't switch power. Don't hear the relay either. Not sure yet. Gave it a few bangs. Didn't solve unfortunately. Depending on refund or return I will try to open it then. Have some Relays if that's the issue I should be able to fix it. Doesn't smell burned. Have the P100 EU socket version. Looks like it's only clicked, no glue

Robinson Robert Wilson Ruth Garcia Thomas

Awesome Video! mine is blinking green and orange the whole time and i hear the relee clicking? any ideas about this?

thank you

legend

👏👏

<3

what if i already installed the typical way with the bloat? Will this method overwrite all the bloat I have installed earlier?

thank you save me alot of time work great

Exactly the video I needed, Brilliant mate cheers

Thank you soo much✨

Great video and info for installing and updating the Nvidia Drivers!!! Great job!! 💯👍