What kind of idiots engineered the crankshaft position sensor in there

Hei er det mitsubishi asx ?

Throttle position sensor??

Good Video, Just wondering if these sensors need cleaning like MAF sensors do? Thanks

So I knew how to do this adjustment or both adjustments but I just wanted to make sure there wasn’t any special steps or anything my issue with this is you can clearly see how bad it looks thru those holes I think you should have addressed that in this video along with getting the plug out when you pushed it inside the rotor that could of easily got bound up in the brake shoes behind the rotor while making the adjustments no hate on my end I just felt like there was a lot of things missing but a lot some things that didn’t need to be in the video such as explain the ratchet and all the ways to get the mat from the console that stuff I feel like if you’re looking at a video like this you probably have that knowledge already well honestly I really hope you do also it would be wise to check those shoes they could be worn out and gone and that be the reason the ebrake is not functioning properly just felt there was a lot that people should know when going into this small job because it can be very simple as shown or much more elaborate including needing proper brake tools for drum brakes etc. but like I said no hate and there was define good info just wanted to offer some constructive criticism since you are the creator putting the info out for the internet to see

Watching this in 2025 and currently have a 07 TL with this noice. O rings just need to be replaced and not power steering pump as well ?

Watching this in 2025 and currently have a 07 TL with this noice. O rings just need to be replaced and not power steering pump as well ?

I have 2010 Nissan rogue airbag stay on and keep blinker how do I fix this please

Good job

Thanks for talking about odor, it's very important.

Thank you

Hi thanks for vid ,anyone know if once the relay has clicked(switched ) a bulb will suffice for a continuity test on the other 2 terminals, tried it on 2 relays and seems not to work, unless both are faulty, lol. Thanks.

Thanks man! Great video! I wish other manufacturers made good filter too 😑

Is this the same as a 2013 STI?

A hand held tourrxh

Put heat ob it

Great explanation. Very detailed and thorough. Thank you.

Paper clips will spread pins but over all great video

Did you end up keeping this scanner? I have been searching for one that will work on all our cars, a TL like yours, Nissan, and Mazda. I would like to find a scanner that someone has done a lot of videos on to test things out and was wondering if you plan on doing more videos with it? I absolutely love your videos and have learned so much from them!! I saved my TL from going to the scrapyard because of you! Keep up the awesome content. Very much appreciated! 😊

Rocker cover gaskets on our 06 Forester are weeping a little oil so we'll check the PCV valve while we're at it, thanks for the tutorial!

Very informative video

Where can I order the atf feed pipe because I am missing one?

My Subaru impreza 2011 overheated and red light appears on the dash board.Although i had replaced thermostat from the mechanic as the lower hose pipe is not hot which indicates me that the thermostat is not opening. But still i feel that thermostat is not working properly so i have put Bars HG1 which resulted car inside heating system failure with no improvement . Still the bottom hose is cold , car gets hot but not sucking water from reservior. Apprantely there is no leakage. Yes when the car get hots its push the water in the reservior tank which overflows the reservior tank

I've been starting to watch some of your videos, can you do a video explaining what all the different sensors/electronic parts are under the hood? There are multiple plugs connected to the upper and lower parts of the engine and I would like to know what all this is.

Thanks jason statham

Straight to the Heart ❤ of cruise control.

Thank you so much

They are selling me one for 4000.00 a 70,000 miles on it.....sould i buy it?

Olso nokc the fan motor with small hamer after you test the relay and kep car motor ruaning ac on

Best by far layman's instructional vid I watched (20 or so vids). It's all about calm, step by step, actions. Thanks.

thank you so much bro! Doing this on Friday wish me luck guys.

Interesting to hear those impressions. I've got a 2010 Impreza 2.0R with the manual 5 speed transmission (here in Europe we still like that 😅) and I quite like it. But also I don't like all the modern BS (Touchscreen? I prefer simple buttons... lane assist? please don't interfere with the steering, when I'm driving one handed 😅).... It's currently at 135.000 km and next week I'm gonna replace the exhaust since it's rusted and not thigh anymore.... Hoping to drive it for many more years to come :)

I dunno. Even some 'high quality' filters claim to be good only down to 30 micron particles. Some cheaper ones claim to be good to 20 microns.

Good men

Great video

So you can use this if the screw is stripped already? Don’t see how that would work 🤔

Thanks. I have been looking for that for a long time.

The KN 138 was $7.60 and now 5 years later are approaching $18 each on Amazon. Another 5 years these will probably $35 each.

Wow! Great tutorial video to test the starter solenoid! Thank you so much for posting!

Your videos are the most clear and informative videos on the web. Period. Thanks

Thank you. That was very helpful.

Your channel is cool and has been a staple in DIY jobs thanks again

My friend love your videos on the 06 TL since I picked one up about a year ago. Question about how the RPMs seem to up tick a bit as I'm coming to a stop then.its sits normally / steady. It's an automatic is it downshifting on its own.? No other noticeable issues with the idle. Thanks

About as basic as it gets. No Advanced testing done here. If you replaced the sensor and still have a fault, this video is zero help.

Thank you! Great tips

And now they’re rated for 20k miles lol

Interesting video thanks

Hello! I'm in the process of testing the same EGR valve on my Legacy as it's throwing P1496 code. May I ask if I test the resistance on the harness connector the same way as the EGR valve shown in your video to make sure if the wiring harness in good shape all the way to the ECU?

I just recently found your channel and it is great. I have just subscribed. I also have a 2006 Acura TL. It only has 110,000 miles on it. Yet, it does need some things. One of my headlight ballasts is out. I have valve cover gasket leak. And the compliance bushings need replacing. So I really, really appreciate the videos. Keep cranking out the videos. By the way, the seats in your TL look great! Are they original?

does it come with a wiring kit?