Hi there! We love our Atlas, (Wife's primary vehicle) I think it's a 2021 and it's been a fantastic vehicle with good towing capacity, and we especially love it for longer road trips to the west coast, or up north. The one we have is a 6 cylinder and now they are using these dumb 4 cylinder engines in the 2024 Atlas models, it's so sad. Many of the new 2024 SUV's I've been looking at have dropped the 8 and 6 cylinder and are downsizing, some are using these 4 cylinder with a turbo and they are a joke to drive. (Tested a new highlander the other day and was disappointed). But anyway, no issues at all with the Atlas, I know some folks have reported electrical, some just don't like the Atlas for other reasons, but we love ours. If you can find a new 2023 they still have a 6 cylinder in those I think. Thanks for the comment. 🚗

Very nice! I've been running all sorts of games and editing software on mine and still love it, enjoy yours and thanks for the comment!

There is a setup video here: kzbin.info/www/bejne/fJC0o62FrtFngZosi=h-HNlGOUgcj2Iq-q But more specifically once you purchase this printer, jump on a computer that's connected to your wireless network, go to 123.hp.com website, put in the model in the first box, select "next" then "Install Printer." This should load your drivers and the printer software. (The software from the website searches for this model of printer on your wireless network). Hope that answers your question.

Glad you found the video helpful, thanks for the comments! ⌨🖱

Glad that you find the video so helpful! 😘

Yes, this device is made for a PC that is too far away to be plugged into a network cable, or that doesn't have a network jack nearby. You just plug in this USB (Wireless Adapter) and it will connect to your wireless router. If you are currently plugged into a network connection, you shouldn't need this however.

That will definitely do it, watch out for those loose dongles LOL. Thanks for the comment, glad the video helped! ⌨

You are so welcome! Thanks for the comment. ⌨

LOL no worries!

The speakers have amazing sound, I installed in an auto-shop for a client, powered them using a Yamaha receiver and the sound is crisp, and clear. I'll get to the review video. Thanks for the comments.

How's the bass for a 6.5"? I run all Klipsch Reference and RF II's with Atmos. I know they sound amazing!!! But my wife won't let me listen to music inside anymore.... lol. Broke 1 window with the pressure of the speakers in the room.... cracked stucco. 2 RF42's 2 RF62's 2 RF82's.... 2 12" 350 watt woofers

@@jpen541999 The bass is really good, but I still added in a 12" subwoofer to the set when I did the full setup and that really made a big difference. I think without the Sub it would have been "ok" but the shop owner really prefers having it, it's a whole new level.

Thanks for the comment, good to know. I wonder if the newer model is any better? I've been using it consistently since purchased, but have had to restart the router a couple of times since I've installed it, not sure if it was the internet provider, or the device but that seemed to help with any stability issues I've seen.

So is the unit not charging all the say up, or is it disconnecting after a couple moments? Looks like it's a wireless device with a built-in battery that may also have a power-save feature that could be causing an issue. Try all the usual things, also be sure to try the device on a totally different computer to see if you get the same exact results (just to rule out a computer problem) Could still be like a driver update or may need to turn off the power save function. You can also try the following: Go to device manager Expand USB controllers Open properties for each of your Generic USB Hub(s), root hub, & host controller Go to power management & uncheck "allow the computer to turn off this device to save power"

Yes, you just use your connected phone, or I-Pad volume to control the speaker output. The speakers do have a volume on the rear panel, I set that to about 50 Percent when I installed them, but just control sound off my cell phone, or the wife will connect her I-Pad and control the sound from that sometimes. Thanks for the comment!

Hello! Yes more than likely the battery needs replacing. The other possible issue is that it's not synching and you may need to swap the USB port that the dongle/receiver is plugged into, one of those two things should correct the problem. Thanks for the comment!

Lol, nice ya it takes like a full on 60 seconds or so to initialize till it's actually ready to print once you power it on. Thanks for the comment! 🖨

This has held up really well except for one thing, that is I had to tighten up the bolts a couple times till I finally used Loctite on them and then haven't had any more issues with things vibrating loose after long road trips. Get some lock nuts, or use Loctite when you put it together and that will just save you tightening things later on. Also go with a hitch stabilizer or some sort. Thanks for the comment!

You are correct, about the switches. Three actually, one for heat, one to turn on the stir function, and one for the light/lamp. Thanks for the comment!

So just plug in your USB dongle to your computer, but you also need to pre-charge your keyboard as well before using it wirelessly it looks like (internal rechargeable battery) then you should be able to use it as a cordless. If you are using the USB C adapter swap to just the USB if possible, try that. Also test it on a different computer to verify you got a good keyboard/dongle. Change USB ports too. Hope that helps!

Ya, I don't blame you, the battery is a full-on beast LOL. The main drawback. Thanks for the comment!

Glad the video was helpful, enjoy the bed, we love ours! Thanks for the comment. 🛏

Try another USB port first, then if it still opens randomly, yes you should be able to return this. Did you order it online, or if you bought it locally, just take it back to the store. Sorry it's giving you troubles. Thanks for the comment!

I'm so glad the video was helpful! Thanks for the comment 🙂

Hi there, I think you can get a replacement charger here at this site, most parts can be found: ancheer.shop/ Thanks for the comment!

That's a great question, I had to look it up to be safe but found out that the ice is just fine after running the cleaning solution. Looks like it flushes some water through the unit when it restarts, and I've never noticed a taste or smell after running the cleaning cycle. Thanks for the comment!

@@FixMyBleep Thanks! That sounds right!

Thanks, I appreciate the comment!

This is just another very handy tool that saves you testing weekly, they have you calibrate the IO Pool device to start it, then the device monitors if you need to add acid (most common) also you can tell at a glance if your salt cell is spot on, or if the pool is chlorinated correctly, along with water temp. Thanks for the comment.

That's a great question, so we've noticed if we have just cooked up some dinner, or made something that smelled up the house like garlic and chicken, placing the Winix up on a counter circulates the air quicker and definitely helps rid the home of the smell faster. The light actually turns orange or red for a while (bad air) then goes blue again once the air quality improves.

These are powered by 120v only. Thanks for the comment!

Sorry to hear it's giving you troubles. Turn on the ECOVACS DEEBOT power switch. Once the DEEBOT is on, press the reset button for more than 6 seconds until there’s a music sound coming out. Once you hear the beep sound 3 times from the device, the DEEBOT has been reset. You can also Try holding in the button for 30 seconds and then release. Also be sure to pull off the front wheel if it's blocked up with hair or anything, and the same with the spinning sweepers. If all else fails, place it back onto the charging station and try holding in the button for 30 seconds and release. If it's still not going to cooperate try their customer service 1 844 326 8227 or [email protected]

You may check these guys out, they specialize in Tesla racks: www.xrack.us/product-category/cargo-carriers/ or just get a standard carrier rack and be careful to just not overload it and you should be ok. Thanks for the comment!

Sorry it's giving you troubles, try running through the setup again using the online guide where it's supposed to search for your printer (123.hp.com website) also you may need to go into the menu on the side panel and select "forget network" then run the setup again. I hope one of those two ideas help you out.

Hello, and thank you for the comment! You normally want a receiver that has a subwoofer port on the back of it, but it also depends on your setup, # of speakers, etc. Here is a link for one, I really love my Yamaha, not this one is more than likely overkill, but you could get a Pyle for $100. cheaper that is similar, just check the customer ratings. Hope this helps you out. amzn.to/3J8xPen

Is there any way you can add a 2nd router, or do you have any network cabling at all close to where your computer is located? That may be an option I've seen done when all else fails if you just can't get a signal to reach or if there is no way to fish another cable through a ceiling or into a wall closer to the computer.

@@FixMyBleep none without tearing stuff up and it's not my house. I ordered this to give a try. Should be here tomorrow. I'm really hoping it solves the issue I have. We already have two routers due to the amount of devices used on the network.

Looking at the specs on the actual website, here is what I found: The peak power is 50W in max mode, 40W in eco mode. Thanks for your comment.

So I just looked up your mouse, and here is how it works: Just plug in the mouse to the PC using the included cable and use in wired mode and charge the battery at the same time. Plug in the Wireless Dongle to use in wireless mode. So it looks like the cable will charge it up, and after a while (once fully charged up) you can just run it wireless. Hope that helps. Thanks for the comment!

You may try this site for starters, they have changed names (sorry for the lengthy link): www.ancheer.shop/product-category/e-bike-parts/?gad_source=1&gclid=Cj0KCQjw2a6wBhCVARIsABPeH1tQQL1VpM3uN9G_0zFlZZBCY02WgEDdwRoFs-bHsLou-107tnOhPFIaAlOHEALw_wcB

Glad the video was helpful! Thank you for the comment!

Not at all, if you are still within the 3 years from when you purchased your pool robot, contact Maytronics (lookup serial number here) registration.maytronics.com/ They will have you send it in and repair it for you and return it after a week or so. Best customer service I've ever seen and honestly I was surprised these guys replaces so many parts. I'll be buying another one of their units. It's NO BS Give it a try at least, if you are out of warranty, at least contact them and see what they are willing to do. Thanks for the comments.

Thank you! The hitch stabilizer is standard and interchangeable with anything, or you can get a totally different hitch stabilizer if needed. Hope that helps!

Sorry to hear you are having issues. Try holding in the button on top of the unit, also do the same while it's on the charger hold it in for 30 seconds to reset. If you still aren't getting anything try their support. To contact them online try this: www.iliferobot.com/support/ Here is a Toll Free Support number: 1-800-631-9676

Glad you were able to get things working, thanks for the comment!

Glad it helped, we love ours!