If you add a cooling fan, the print results are even better

That's not a Hypercube EVOLUTION. It's a hypercube.

Can you update the link to purchase the cable carrier on Amazon? Thanks!

Great video and fix ideas. I just bought one of these printers 2nd hand (im in australia), and the PETG tube banging on the lid is annoying. Im going to do these mods - just one question (if you can remember), what size was the cable chain you used? the link beliw no longer opens (unless its because I am here in Australia), but I can get them from Amazon here in Australia - but there are many sizes........ thank you

Just picked up this model amazingly at Goodwill for only $50 because they probably didn't know what it was. Has some filament still in the cartridge so will run the test print to see if it needs repair since it was at Goodwill but when I plugged it in to test it checked the level and was good. Am hoping it can increase bed size to around 10 or 11 inches for the X and Y since Z is pretty much fixed being enclosed. Very clean looking so hoping it works it would be an awesome self Christmas present this year.

Hello what are the settings for a smoot print

is there any info on how to change the tip? it seems like the tip is fused directly into the brass cylinder it comes from but hoping that's not true.

perfect thank's

was that complete ? file's mean

I am using fork connectors on my mosfet.

I requested some samples of the iGus filament and printed my own iGus Drylin bearings for free!

I have 4 Years with my Davinci and just now the coupling on the extruder side burst. Thx a lot for this Video. I am definitely making this Mod for easier access.

I could not find that file on thingyverse. the link was not up to date

Where is this little black plastic part available you printed out which is needed for this mod? Can you send the printfile by email? Many thanks! :-)

I have a few problems concerning your build. First is your screws of your bed. They are hanging loose in the frame? So the bed can wobble? They have to be tight on the spring tension so the bed can not wobble. Then there is the problem with feedrate. Change your extruder to one that has a better tension to filament. When you speed up the speed and get bad extrusion means your extruder can not handle the amount it needs. ( and maybe upscale hotend temp) Retraction is a good start to dial it in the right way. When i was building my hypercube i was sure to keep the bed tight, the retraction dialed in right and a good extrusion. Mine works like a charme. No blobs or strings or elephantfoot or under extrusion. Sometimes even better then my Ender 3. So keep up the good work and hopefully the next time a video with some major approvements.

Very nice! Thank you for Fusion version!

i WAS having the same problem but what i did was.....i removed that piece of crap useless plastic case and tossed it in the trash. THEM all i did was....I used a piece of brass tubing and ran it through a rubber gromet that came with the machine. but FIRST i placed the rubber gromet into the hole where the filament slides through and super glued it into place it wont move ...trust me. then i slid the brass tubing through the rubber gromet all the way down to the aluminum guide tube. NOW every single time i change filament it the filament is guide ALLLLLLLL the way through without missing a beat. the problem i was having was....i would feed my filament into the guide tube and it would POP out through the SNAP casing for the print head and MISS feeding itself into the extruder. NOW...it works PERFECT. PLUS nothing moves. on the other end of the brass tube i attached that pfe snap fit tube and then the other guide tube into the pfe snap fit small tube. i know it may sound confusing....but a small brass tube works wonders to feed the filament perfectly through to the extruder head so the filament never misses where it is suppose to go. THANK you for the video...your way works great to. but as the old saying goes....THERES more than one way to skin a cat. take care. john from kansas.

thank you for the video.

Nice fixes do you have also solution to use open filament instead of the xyz cartridges ?

Hi did you find the part to curve the PTFE also did the part you designed hold up well

I’m also interested in seeing you attach a BMS and perhaps how you would consider hooking up multiple packs in series

Excellent video and very neat compact design for sure. I love it and will try it out on my Prusa MK3. One thing maybe to think about for the future is to somehow bind 7 packs together to make a 24 volt combined pack as it seems more efficient then a 12 volt setup. Maybe 2 plates as a harness with long bolts to hold the packs together. I am trying to build a portable case rather then a power wall inside as you said nobody wants to burn their house down.

Hello Pieter. Is it correct that this 3 in 1 printer from XYZ do not have autoleveling for the printbed.

What's the brand of white PLA used? It looks great!

can you share the description and thread size for the new tube connection. Is it metric and standard inch. or share a part number and where did you acquire it from.?? Looks like a nice modification.

I like your video, could you sell me the part you made to change it in my printer Arturo Cherny

I got this printer as a gift and have not printed with it yet. The problems that you encountered are not encountered with my unit. I like the explanations that you provided. I will continue my learning process and expect to be printing soon.

where do you get the screws for the 3d printed part?

can you send me the .stl for that small part?

Good looking mods, but really not the best thing for someone that uses the laser module regularly as well.

Nice job. So you have a link for the z axis rods 3d parts? I like those better than the original ones!

12:15 Can you show the settings you adjusted to get a better printing result?

Any BMS there?

Hi Pieters, could you tell why my 3d printer's touch panel is not on?

This dude has a professional announcer's voice.

Essa mesa está subindo fora de sincronia. O Correto seria 4 guias nas laterais e o fuso do eixo Z ser apoiado no centro da mesa. Assim ela se movimentaria por igual. Pode-se ver claramente que um lado da mesa sobre antes que o outro.

And anything else I can ask how to get the ip address of your printer?

May I ask how it resets the cartridge stats and filament? If you reset Ted and don't buy it.

I’ve used the DaVinci 1.0 Pro for a few years without too much issue. Your video is leading me to a few upgrades but of more interest are the tweaks to get Benchy to print so well. What changes did you make to the settings? I’d like to use Cura or similar instead of xyzprinting software for printing and have been a disappointed they’ve not issued a firmware upgrade to make that possible for the 1.0 Pro. Do you know how the system can be reflashed to allow cura or another better software?

Very nice dude! I like the idea of being self sustaining and of grid, but is it really necessary in Belgium? Because you get your solar energy subtracted from your energy bill?

A good cheap control board option is the makerbase e3d Robin 32 bit. Cost is around $20 for the board with quiet tmc2209 steppers and extra support for sensors. Well worth the price, 8 bit boards simply can't do detailed prints well at high speeds since corexy printers require a lot more calculations compared to regular cartesian printers.

Hoi, ziet er goed en compact uit mooi hoe je de Busbars hebt gemaakt. Wel jammer dat je moet solderen aan een Cell

nice looking good

Pieters, so the dimension need to be +70% of the intended print "volume", correct, or after a given size, the proportion varies, needing also a beefier frame? Thanks

great vid! i couldn't find the size of the screws/bolts; pls provide sizes. thanks.

Hi What do you think about voron1.6 and hypercube. is voron 1.6 is better design then hypercube

Seeing the first benchy my eyes started bleeding :D Good job Pieter!

can you link that 40mm to thingi adapter?

Hi there, Your accent sounds terribly Belgian, I should know since I am one, correct me if I am wrong. I am also building a hypercube (500x500x500) but I followe Daha's videos up untill now, I am starting with the electronics part now but then I notice I have a very diferent motor controller card (Duet 2) and LCD (Paneldue 7i) so I am a bit thron of my rocker here, I have already found some intell on this but is it ok if I drop you a question from time to time? If my suspicion is correct we can converse in dutch :-)

I have an idea of something cool: a 3d printer above the car, connected to car battery, ready to print anything you need on the trip! Ahah