Excellent, I'm glad you got some use out of it. Been a few years, zero fuel issues since! I can stand by the K-suspension products and seals.

It's almost completely stock. That's an aluminum valve cover; good replacement for the soft stamped metal cover (chasing a leak). It has the original block, exhaust manifold, and throttle body. The fuel injectors are K-suspension 12 hole upgrades. The coolant system is out of a newer 96, not the original sealed bottle and hosing. It also has old in-line fuses, and the chassis/electrical was wired for the old 4 cylinder 2.9L.

@@inawrocki207 that’s awesome. Would it work for a stock 1989? I can’t seem to find any and would really appreciate if you know the company that sells em

@@abrahambarkhordar5572 it's this one here: www.summitracing.com/parts/rto-rt35002?seid=srese1&gclid=Cj0KCQjw_-GxBhC1ARIsADGgDjvhrDsowtqAHGBs7AAqJgnH2A3NU6h731jAt3uyUoQUPI1sF7QFQtcaAqTUEALw_wcB Fuel injectors are K-suspension.

@@inawrocki207 Tysm! Even though it doesn’t say 89 or 88 it still works on renix? That’s awesome

Hey my dood - still alive. Life happened 3 years ago and everything changed. I am, however, preparing to relaunch the channel with some content I enjoy doing more.

@@inawrocki207 good to know i hope you have a great year

Yep this was 5/8" OsB - watch next episodes to see it fully trimmed and painted!

Acid stain is not a coating that can peel - it chemically reacts to the lime and mineral in concrete to permanently alter its color. It will never peel off. That said - it can sun bleach and fade depending on color. A coating does protect it from surface damage, and add sheen.

@@inawrocki207 Thank you! Will the sealant peel?

@@chiplarkin4069 There are many kinds. This was acrylic coating - it does not peel. It hardens into a composite, glassy seal that could be chipped or fade with enough punishment. Epoxy sealant is another options. It's harder, similar strength, totally different application. When done perfectly, epoxy is very strong and can last for 10+ years. When applied less than perfectly, epoxy will flake with heavy traffic. I went with acrylic because it's much easier to just wash and reapply a new layer of coating regularly. Epoxy requires an entire grind down to concrete and fresh reapplication.

That only applies to walls attached to residence. Nine of these walls were attached - it's a free standing structure with different code than what you're referencing.

@@Solidus2845 well did they do that wall double and the ceiling?? Because that's what it would take.

Hey, thanks. Those are "saggy stoppers." You can get them anywhere or order online. They are a little corkscrew pin that just keeps headliners up. I had actually done this headliner myself a few years ago; it's not sagging, but I figured it eventually would and the pinned look works in an older Jeep.

no , no one in america likes putin except trump

First, soak a spot on the floor with water. That is what it will look like once sealed with acrylic or epoxy. If you feel like it's still too red, you may have to look for a different color stain and apply it over the existing and get it darker/more brown. My floor came out dark brown (original color put down) with redish highlight marbling (second color mahogany you saw me apply here). It all looks red when dry, but color vastly changes when sealed!

These were in the lighting isle, bottom shelf loose in boxes. Same place you get the ceramic ceiling sockets (they snap onto them).

It went from "Horrible" to "Just about as horrible." Lol There's nothing you can do to make a 4.0l stop guzzling, really. This upgrade is more about quality of life and longevity for the engine, providing smoother uniform performance when running, reducing misfires, that stuff.

What year is your jeep? I've been thinking of getting these for my 2001 TJ.

www.nationaltoolwarehouse.com/Power-Steering-Pump-Pulley-Service-Kit-P51216.aspx

Agreed - black on cars hides every single detail, making even an awesome car look dull and generic. That said, watch Fonzie of Dipyourcar; every single car of his is black. That way, the door jams and stuff never stand out, no matter what color you spray! Good luck on your dip, hope it looks as awesome as ours came out!

That seems to be full price. I nabbed this for $699.99, I believe. It was in store, but Costco is always changing things up. That said, this chest is still perfect as the day I got it, even after moving with it. It is superbly built and fully matte black is beautiful.