Amazing. I was about to ditch my old foodsaver. This literally saved me over $100.
@TheElectronicDilettante10 күн бұрын
Great video. It was a huge help. Thanks for taking the time to make it.
@bobseagraves174316 күн бұрын
I have a Bonson brand and this just worked 💪 for me. Wow... 🎉
@billyhelton8230Ай бұрын
@jef4130 What kit did you use on this? Are they all the same? Just want to make sure I get a good kit. I don't want to do it over.
@iveritubeАй бұрын
Merci beaucoup
@Muxik4kАй бұрын
What else can i use instead of a tool. I am doing a trunk harness replacement and happens to be different connectors for vwcc 2013. I want to swap the connectors. To be able to connect it.
@Rolaids65Ай бұрын
Fixed mine Thanks
@PhilippSöhnchenАй бұрын
So thankful for this video. I nearly ripped my fingertips and sweared a lot at the white roll but…it was worth it. Saved me a LOT of money!! Thanks mate!!
@georgeschafer5169Ай бұрын
What a loser...calling viewers name and degrading them
@kathyharris81312 ай бұрын
Thank you! That worked great!
@georgezeck13963 ай бұрын
Thanks. I still swore a bunch but helpful
@StevenLaForest4 ай бұрын
How do I get a set ?
@HairCreationsbyTish4 ай бұрын
Thank you for this quick simple video. It worked for me!
@imakeituptoyou4 ай бұрын
Come over and do mine!
@kaiyodei5 ай бұрын
that is not the model i have
@MUHAMMADKHAN-pe7ez5 ай бұрын
what about the availability of the tools???
@steve92655 ай бұрын
I'm wondering if Air-Egress vinyl is a must here, or is it possible to get good results with less expensive standard vinyl using your methods?
@HAM-CU7BE5 ай бұрын
Hi. I have a Seat ibiza 1.4 TSi 6j cupra, BocaNegrA version with 180hp. Original. I m doing the replacement of that throttle. But I also have to replace the other one behind . Exactly behind of that black plastic throttle, theres another metal throttle. So How can I differentiate the alignment from the plastic throttle to the metal throttle with VCDS and vagcom??
@AmazingArnoldVoice6 ай бұрын
Awesome seeing funhouse to cleanly redone. Great video
@brookhugginson86876 ай бұрын
🤦 Promo`SM
@soonerfan4aa6 ай бұрын
Thanks it worked.
@ForYeshua17 ай бұрын
This helped out thanks. I had to wet the gaskets each time when sealing meat. I'll order me new ones.
@jamesdamewood49977 ай бұрын
Do you reform the power filter caps?
@oscarvogel21407 ай бұрын
great video thanks
@kagough19597 ай бұрын
Thank you!! Great test
@ddbird38 ай бұрын
In a pinch mirco paper clips work also
@AmmoC9M8 ай бұрын
Top seals were fine, but I had to dig deeper. There was a clear (at one time) vinyl cupped washer that was dried out, yellowed and had begun to fall apart - this washer acts like a piston ring seal on the pump on the inside of the unit. I spent about four hours trying to retrofit a handmade washer which ultimately didn't work. My model was the V300.
@vonphillips34888 ай бұрын
Very helpful video. Working on a Porsche Boxster with the same ISO connector as the VW featured in your vid and this really helped me know how to manage the removal. Thank you!
@darkchocolate86548 ай бұрын
Wow, it worked! I was about to buy a new one.
@grantvanhalst446410 ай бұрын
I want to thank you for this! I followed another vid that removes the glass, ya not on the other side. Glass attached now just waiting for the kits. Feeling like a 59 year old idiot after watching this.
@dsbennett10 ай бұрын
THANK YOU! FoodSaver worked last week and today, no vacuum. I assumed it was the pump but it was the seals. Thank a hundert million!
@vincenttrudeau893511 ай бұрын
I was able to repair mine for 30$ instead of a few hundreds because of you. Thanks ❤
@dreadwings3 Жыл бұрын
very good, I liked it
@kevinmach730 Жыл бұрын
Thanks for this! Makes me wonder how many of these I have discarded over years prior to the days of youtube, thinking the unit were just worn out. I have a different model food saver I picked up at a thrift store for 7 dollars and thought maybe it was too good to be true when it wasn't sealing great. But this tric worked. I usually only use it a few times a month, I wonder if I could just wet the gaskets down each time and not replace the seals at all. Edit: I see they are only like 6 bucks on amazon.
@Pamad-bm5jd Жыл бұрын
My fave 💯😍👍
@Pamad-bm5jd Жыл бұрын
My fave wouldn't mind 👍😍
@Pamad-bm5jd Жыл бұрын
I'd sit and watch them forever 💯🥰
@quintenmccarter1875 Жыл бұрын
Bought a food saver from a garage sale and couldn’t figure out why it wouldn’t seal. This helped me, thank you 😂
@Can2en Жыл бұрын
Just did this the other week isn’t so hard bud takes time if you do it the first time. Of course my wheel did not stay in place
@BrewersArcade Жыл бұрын
Good info thanks!
@martineen8851 Жыл бұрын
Thanks! Moded a splitpin in ok size to unlock it after seeing your tool.
@2tallB10 ай бұрын
Yeah it seems you could take the round terminal tool, file the ends a little skinnier, and bend the ends inward to match his. … unless you need a longer pin, but I don’t
@lynnhildebrand4896 Жыл бұрын
Mine is a newer one but just today it seals but won't vacuum but when I take it out it isn't hot where it would seal. Usually it would be hot after vacuuming
@JTomoser Жыл бұрын
My older FoodSaver model V2840 was only sealing on manual. On automatic it vacuumed but would never switch to seal, and if I then manually sealed the bag some air came back into the bag. I searched KZbin for some help troubleshooting and found this video so I removed the gaskets (looked good and I don't use the Foodsaver a lot), rinsed the gaskets, and put them back in. Tried the automatic sealer again and it worked perfectly! Thanks!
@stevenher7711 Жыл бұрын
After rebuilt is very hard to pull the strings,take spark plugs out is easy to pull over, is there something wrong with it in this case need help?
@p.chuckmoralesesquire3965 Жыл бұрын
Hey boss just wanted to say thanks for the video from 2023 :)
@MessyKrieg Жыл бұрын
Saw busted after two weeks. Oiy
@suzanemartin8242 Жыл бұрын
Kill the music and explain what your doing with close up.
@softface Жыл бұрын
Are you the real Buffalo Bill? Your music gave you away!
@leemax121 Жыл бұрын
New gaskets did not work. I placed 1/4 in. Model airplane trim tape on bottom of new gasket and works like a charm now . Did it to old gaskets and they also. Tried vacumming a spoon. Worked 5 times in a row. Dont know how long it is good for.
@johnie169 Жыл бұрын
thank you my friend , this is work for me and finally it works