glad that you liked the video! hope it was helpful for you

hi! thank you for the comment. No, no starch is added to the mixture. Sugars and carbohydrates in the wood are enough to work as natural glue. They are melted down during the extrusion process due to relatively high temperatures, then cooled.

hi! Thank you for the comment. No, in this experiment we didn't explicitly removed the moisture from the coffee powder, since it was already quite dry. however I would have done that if it would have been a 'fresh' mixture, directly coming from bars and coffees. The material should be dry enough to be pellettized (10%-20%)

Hi! thank you for the comment. Really glad thta you liked the video, and really glad that there are people like you out there using this kind of product. It seems a very efficient way to reuse this kind of material. Wishing you good luck!

Yeah me too man!

glad that you liked it!

ciao! purtroppo non facciamo spedizione, mi dispiace

Its probably like using use fryer oil to make diesel. If you're the only one doing it, then you can probably source the stuff for free. If everyone is doing it, then sawmills and carpetrees will charge you

@@ryelor123 I can get this for free. For how long I do not know.

topppp

I know that. However, the engine did just few cycles without oil. This for sure did not affect engine lubrication quality/performances. It is still working correctly. THat's good. Next time I'll try a more viscous oil, like a 5W-40, since I don't neet a lot of viscosity characteristisc at low temperatures, because where I live is difficult to find temperatures below 0°C.

@@profilo_is_back I understand. You are very brave. If your climate is hot, 5w-40 may be reasonable, but due to the molecular size of the oil, it may not penetrate between the piston ring and the block in the engine, the problem may not be just fluidity. In addition, there may be some additives that the oil should or should not contain depending on each engine alloy, in other words, the oil should contain chemicals suitable for the engine parts. It is not possible to understand chemical compatibility immediately, time will show how suitable it is, but if your fuel consumption increases by 15-20% after the change, know that engine friction has increased a lot and you should go back to your old oil before it is too late. I am not an engine engineer, I am making a guess based on my experiences and wanted to give friendly information.

@@JAGATAY1717 thank you I take your advices very happily! I learnt somethign new. Well, this kind of oil (5W) is still ok for the manual, so I think I'll try it. Valvoline is a good brand

Thank!

Hi! thank you for the comment! I've used a Valvoline 0W-20 oil specifically designed for hybrid ve. You can search for 'Valvoline Hybrid C5 0W-20' on Google, you'll find it. i used about 4kg of oil

Thank you very much, glad that you liked the video! I hope they'll contact me ahahaha

Hi! thank you for the comment. No, any further experiment because we didn't have enough material to perform some tests. Moreover we are currently producing a lot of material with another ring die (different compression level) and we can't stop the main production. I'm sorry, glad that you were curios about that! are you doing some tests too?

Hi! thank you for the comment! I've used a Valvoline 0W-20 oil specifically designed for hybrid ve. You can search for 'Valvoline Hybrid C5 0W-20' on Google, you'll find it. i used about 4kg of oil

No, sotto era tutto pari e non si sarebbe creata!

it owuld be like from the beginnig to the end ahahah

JOsssss

No, these are ornamental chicks. Broiler chicks next months/spring. Do you have chicks?

Ciao! Ti ringrazio moltissimo per il commento, mi fa molto piacere tinsia piaciuto il progetto💪

Autoproduttore di cosa? Di cosa ti occupi in ambito informatico?

​@@profilo_is_back Faccio l'orto, cresco animali da cortile, sono radioamatore, faccio alcuni lavori di falegnameria, meccanica etc etc Mi piace il concetto di sana autarchia quando possibile. In ambito informatico sono un CTO, quando ero ancora tecnico mi occupavo di gestione cloud, sviluppo backend, mi diletto in alcuni progettini casalinghi con raspberry e Go (anche dialetto TinyGo per microcontrollori). In questo periodo sto progettando un sistema automatico per la crescita, raccolta e stoccaggio delle larve di mosca soldato partendo da un qualsivoglia substrato organico, ma sono ancora a livello di studio.

Ciao! Grazie per il commento! Si, su alcuni aspetti sono d'accordo, altri no. Questa incubatrice ha una capacità di 90 uova circa. Col sistema che proponi purtroppo non mi aspetto una gran efficacia nella rotazione uniforme di tutte le uova. Alcune ruoterebbero di pi<, altre meno. Un meccanismo del tipo che ho costruito ti dà molta più affidabilità. Ci sono tanti altri design, ovviamente, alcuni più efficaci. Le industriali fanno così, quindi io ho preso spunto. La versione di mio papà era manuale, ma era troppo scomoda. Questa te la scordi e va da sola. Per l'umidità la tua proposta puó essere buona per piccoli volumo d'aria e livelli di ur modesti, come per incubate di gallina. Per anatre é necessario un contenuto di acqua molto più elevato in tutto l'ambiente. Lo puoi ottenere, si, per poche uova e in un ambiente molto chiuso. Ma per più uova hai bisogno di qualcosa che inserisca molta più acqua nel sistema. E in merito alla tua incubata, é un ottimo risultato! Io in questo caso sono andato peggio, le uova per metà non erano feconde. Ciao!

@@profilo_is_back il sistema con la rete elettrosaldata a maglie 2x2 cm funziona perfettamente anche con la rete posta a filo col piano sottostante che puo essere un telaio piano con la stessa rete e una rete zanzariera sopra . fai una prova le uova girano perfettamente . e il vantaggio che quando nascono i pulcini sono gia su un vassoio piano.

Thank you for the comment! Glad that you liked the video! Please like and share, you'll really help me

Ti ringrazio molto! Spero ti sia piaciuto il video

That is a very good idea, didn't think about thermal inertia inside the system. What do you suggest?

@@profilo_is_back I was going to comment the same thing! Black bottles of water could help. Or maybe you could try making some water pouches with those super thick trash bags and those heated element bag sealers. :D

thank you very much, glad that you liked! please like and share, you'll really help me!

That's good! It seems a good machine, I've searched it on internet. So you had similar issues? How did you solved? Do you use this machine for your work?

Hi! Thank you for having watched the video! Did you have the same issues? If you write down your email I'll send you the code

Do you also have a speed controller, together with hydraulic feeding system?

Hi! Thank you for the comment! Well, maybe I wasn't realy clear. About 'wood flavours' I mean different type of woods. About normal 'flavours' I mean that some people use some plants/substances to aromatize it, like citrus fruits (oranges, lemons..) or rosemary. This is may add some taste in your grill!

hi! thank you very much for the comment! glad that you liked the video!

Rdf matalb bro...mujhe ye machine lagana hai kaha milega aur konsa machine thik rahega

I change it every year OR every 20'000km