Does it flash when the truck is off if it does is it normal the tailgate strip
@rosstrittler6 сағат бұрын
It should only light up when the tail lights light up.
@jonahgillaspy6094Күн бұрын
what axle stubs did u have to use
@rosstrittlerКүн бұрын
I just used the stock ones.
@ALEXNERI3Күн бұрын
So these bulbs are using the stock xenon hid ballasts?
@rosstrittlerКүн бұрын
Yes, they are plug and play
@ALEXNERI3Күн бұрын
@@rosstrittler is there a way to not use the ballasts?
@rosstrittlerКүн бұрын
@ALEXNERI3 I'm not sure, I think ballasts are required for DS1 bulbs regardless if they are xenon or LED
@ALEXNERI3Күн бұрын
@@rosstrittler Thanks for replying!
@SvdhCzhndКүн бұрын
Harris Scott Perez Melissa Brown Donna
@marcosmaciaz50043 күн бұрын
I got the same exact set for mine did u need to put any spacers? Or does it not rub on the caliper?
@rosstrittler3 күн бұрын
No rubbing on the calipers, just on the inner fender on full turns
@marcosmaciaz50043 күн бұрын
@@rosstrittler awesome thanks for answering!! 🤙
@DeborahDixon-k5h4 күн бұрын
Lopez Scott Williams Scott Miller Timothy
@manoweb14 күн бұрын
👍 Great Video! Please Read: If you haven't already, you NEED to upgrade your thermostat valve with new internals from TransGo, Superior Technologies, or GM. That cooler valve needs to be opening way before 195 degrees. This was a fault GM made and they've admitted it to the point of posting a service bulletin to upgrade this part.... of course they didn't recall ir, so unfortunately we have to pay for their mistake by purchasing these new parts and our transmission replacements. Good luck!
@rosstrittler4 күн бұрын
Thanks for the heads up!
@richardnajera40646 күн бұрын
What did you do about the Check Engine light? I keep getting them so I took it off after a week.
@rosstrittler6 күн бұрын
Just cleared it and never came back. The only reason we got a check engine light was we unplugged the MAF without the battery disconnected. Make sure your MAF is pointed in the right direction and there are no leaks prior to the MAF.
@richardnajera40646 күн бұрын
@@rosstrittler there is only one way to insert but your MAF location is different from mine. My sensor is pointed towards the engine. After 5 starts it goes off.
@eduardobzjr8 күн бұрын
Did you found the company that sell the connections on metal? I'm in need of that also
@rosstrittler7 күн бұрын
ARM Motorsports
@boostautoparts8 күн бұрын
Great video! Personally I don't find sliding the console back difficult and I love this on my personal build
@rosstrittler8 күн бұрын
Thank you, and thanks for a great product!
@raphaelgonzalez168910 күн бұрын
What size suede roll did you use??
@rosstrittler10 күн бұрын
We kept the stock headliner fabric
@edboii352011 күн бұрын
Great video 👍🏼
@rosstrittler11 күн бұрын
Thanks 👍
@rosstrittler12 күн бұрын
Walbro 450 fuel pump: amzn.to/46JAGFk
@rosstrittler12 күн бұрын
Wheel Light Link: amzn.to/4cspyOx
@rosstrittler12 күн бұрын
Starlight Kit Link: amzn.to/4dm74AA
@rosstrittler12 күн бұрын
Genuine Nissan Oil Filter for VK56: amzn.to/3WMXlMs
@rosstrittler12 күн бұрын
Link to the rock lights we installed: amzn.to/3YD9Uwy
@rosstrittler12 күн бұрын
BMW B14 PSS9 Coilover Kit - Bilstein 47-269064 amzn.to/4coAPj0
@andrewf848612 күн бұрын
Take the gum out of your mouth. And don’t post HP and TQ gains unless you have dyno results. Most of the advertising out there is massively over rated. Like the BMS 500whp kit, with what they sell you, you could not hit 500whp. From my experience your car is probably in the 430hp range. Especially on a stage 2 tune with no e85.
@rosstrittler12 күн бұрын
👍
@rosstrittler12 күн бұрын
Best N54 Oil Cooler Link: amzn.to/4couGDl
@rosstrittler12 күн бұрын
Newest Intake Link: amzn.to/3yE68IE
@rosstrittler12 күн бұрын
Tesa Tape Link: amzn.to/3WJb07i
@rosstrittler12 күн бұрын
Intake Link: amzn.to/4dJE1H4
@rosstrittler12 күн бұрын
Valve Stem Link: amzn.to/3WJaKVS
@rosstrittler12 күн бұрын
Authentic Timken Wheel Bearing Link (G35/350Z Rear): amzn.to/46HS913
@impulsivegaming692613 күн бұрын
You guys did this without taking out the seats?also would it be possible to take out if my truck has the center console not the flip seat
@impulsivegaming692613 күн бұрын
Also how did you wire it?
@rosstrittler12 күн бұрын
Yes, we did. Just fold them down as far as possible. Shouldn't be any different with the center console.
@rosstrittler12 күн бұрын
Currently just using the cigarette lighter
@kennethsavatteri246013 күн бұрын
What lower charge pipe to intercooler piping are you using?
@rosstrittler13 күн бұрын
It's the piping that comes with the ARM 7.5k intercooler. ARM also sells a single silicon hose as a upgrade, which I'll probably do in the future.
@ralphsnightmare10313 күн бұрын
how are they holding up now?
@rosstrittler13 күн бұрын
Amazing! Coilovers are a must for these cars.
@zachslaughter643213 күн бұрын
Know I’m super late on this video did he ever drive without the headliner in the truck I have a guy dropping off a truck and he needs his truck during the week while I work on headliner
@rosstrittler13 күн бұрын
Yep, the only problem is the third brake light doesn't work without the wiring harness being plugged back in.
@KingRoy41714 күн бұрын
Got a 2015 sierra with 283000, rebuilt tranny. I got the same shudder so im definitely copping one of the billet converters and possibly a mew 6l80e. I dont mind spending the money as long as I can prolong the life of my truck. Im learning so much and its addicting. Thanks for the video
@rosstrittler13 күн бұрын
Thank you, and good luck 👍
@Theanswer000015 күн бұрын
Good set up
@rosstrittler14 күн бұрын
Thanks!
@Darthvolvo15 күн бұрын
Love the ingenuity.
@rosstrittler14 күн бұрын
Thanks!
@Darthvolvo15 күн бұрын
Nice addition to the truck. The process wasn't that difficult at all.
@rosstrittler14 күн бұрын
Not a bad install at all.
@WesNorton-xd1ln17 күн бұрын
Damn do some rust treatment.
@rosstrittler17 күн бұрын
She's a little beat
@jamesethan374918 күн бұрын
You got got some hilarious editing 😂
@rosstrittler17 күн бұрын
Thanks man
@jamesethan374918 күн бұрын
100% agree. My 6L80 went 248k miles on original tranny, finally torque converter broke.
@FlyboythaACE18 күн бұрын
Thanks for the video. I'm going with the -51 offset on same size wheel and truck. I hope it looks this good. Fyi the chrome lugs and center caps you see on Semi's truck wheels are mostly plastic, and they hold up for years lol.
@OhDatsHarrison273219 күн бұрын
how are they holding up i just bought this same set except the r4 version and they are extremely bright
@rosstrittler19 күн бұрын
Doing great so far
@OhDatsHarrison273218 күн бұрын
@@rosstrittler nice thats great now i feel more comfortable installing them on my truck
@_Trollfaceedit_20 күн бұрын
Thats really fast💀💀
@gamergeek893321 күн бұрын
"If you dont have a strong enough impact"... *holding harbor freight Hercules battery impact* I was seriously shocked.
@brettwhitelaw259721 күн бұрын
that things a steal great job
@rosstrittler21 күн бұрын
Thanks man
@tomaszkrezel746721 күн бұрын
You are doing amazing work I hope you will make this porshe look brand new again. It's a pity that so few people watch you
@rosstrittler21 күн бұрын
Thanks, man. I just enjoy creating this type of content.
@stevenpham244321 күн бұрын
Did you get the hose upgrade as well? Or did it come with a hose?
@zacccook32522 күн бұрын
W homie for teaching him while working
@RealSteelFabrications22 күн бұрын
that add was perfect lol. We need to see this thing offroad
@rosstrittler22 күн бұрын
Lol, thanks. Will definitely do some performance videos with it in the future.
@jason.g291023 күн бұрын
This video got me started on modifying my huyndai too haven't been able to stop since 😅
@rosstrittler22 күн бұрын
Nice, it's a great mod for these things
@Darthvolvo23 күн бұрын
Just curious, how many cars do you own? Nice acquisition!
@rosstrittler22 күн бұрын
Some of the cars on my channel have either been sold or other people own them, but I currently own 6 cars.
@patrickreddy533223 күн бұрын
i don't know how i've gone through life not knowing these existed. the v8 sounds great
@rosstrittler23 күн бұрын
I had no idea they had V8's, let alone twin turbos.
@mynamegeoff713524 күн бұрын
Install videos are soooooo boring
@flyonawall652127 күн бұрын
Great video. It was a lot of work but looks to be a successful swap of the torque convertor. I'm needing to change mine out, I'm just wondering if you were happy with the torque converter you purchased so far?
@rosstrittler27 күн бұрын
Thank you. The torque converter we got is still working great and has always shifted smoothly.