you can place your order by sending a message here : instagram.com/superqxl/ or FB facebook.com/profile.php?id=100034784602403 😁👍

@@talesofgear Thank you so much!

@@piliyouxia6648 you are welcome! :)

Thank you! :)

The handguard is a real HK slim handguard, got it locally from a guy....if you need one, Tactical casting is making clones you can check it out here: facebook.com/media/set/?set=a.113211310616317&type=3 As for the SEF trigger housing- from Ehobbyasia, but i think it is out of stock now....

Thank you! Yeah, it's not working anymore :( if i manage to find it i will update the description. :)

Hi! Well, after some time you'll be able to hear it when it's full, just a thing of experience...until then, you can take an empty mag and weigh it. Then fill it up for 10-15 sec. and weigh it again...15 sec is way more time then it's needed and will ensure it's full. The next step is to repeat the process but this time you are counting the seconds...i would start with 5s and check the weight. Repeat till you have figured out how many seconds is needed to have it full. Try to have the empty mag each time around the same temp., because if it's colder it can take more CO2 and if it's warmer it will take less...have fun! :)

Das ist richtig. Da gibt es komplette upgrade-kits/conversion kits für den Umbau der V1 zur V2, aber diese sind meistens ausverkauft. :)

​@@talesofgearvielen Dank 😊. Weißt du auch ob die v2 gearbox mit dem v1 bolt laufen wird ?

@@Core2duo283 meinst du den Abzugsmechanismus/ tigger group? Das wird gehen, sind gleich für V1 und V2 soviel mir bekannt ist...

Ok. Aber muss ich dann auch den v2 bolt nutzen ? Oder kann ich den V1 weiterhin nutzen ? LG

@@Core2duo283 man kann nur einen oder den andernen kompletten bolt carrier nutzen...entweder V1 oder V2...beim Umbau geht man darauf aus den V2 bolt carrier zu verbauen, da dieser besser ist als der V1....versuche den upgrade kit zu finden, da kannst du sehen welche Teile man braucht. In diesem kit ist sogar das V2 Magazin :) schau mal: www.sixmm.com/cdn/shop/products/VFC_UmarexMP5UpgradeKit1copy.jpg?v=1623088281&width=750

Thank you for your comment and explanation. Much appreciated! :)

Hi! I'm sorry to hear that. Besides the handguard, what else do you dislike? I've pointed out the things that are not correct for a M16A2, like the FSB...Also, the fact that the real M9 bayonet doesn't fit...in general, the looks of it is correct. Handguards- honestly, those are actually done very nicely. The weigh, feel and look just like the original early, 1984 dated handguards i have. Yeah, it's not perfect, but for this price range it's the best one can get. For better feel and looks it needs a few changes, which i have addressed in my video- outer barrel, FSB (these 2 will add weight where it's needed and improves the feel greatly!)...if you wanted something that looks and feels very good without the need to change anything, then you are looking at a totally different price range...way over 1200$ (without shipping) and these aren't easy to find either...for example DNA, VipterTech etc...the VFC M16A2 is a great base for making it look and feel more realistic with some investment and still keeping the costs under 1k....I'm almost done upgrading mine and hope to make a video soon. :)

@talesofgear Thanks for the reply. I think its only the Handguard and overall weight of the front end. For the same price I got the VFC HK416a5, GHK Ak74 GHK Auga2 and they all were perfect out of the box.(Just the Ak74 had some Quality Control issue on the Handguard fitment.) Where I live we dont have the option to buy real parts for modz. I found a handguard that will transform it to a M16A4(30-60days ETA)but I would have really liked to keep it as is. For a 100-150$ more I could have preordered the new M110a1 GBBR. Thats why I'm pissed. I spent to much money lately and those GBBR are stacking up. In retrospect I would have not bought it. It stills looks great though but its the feels handling it. What do you think of the New NorthEast Famas and VFC M110a1? I preordered the Famas and will make the M110a1 Preorder as soon as they make a listing for the Magazines. They are both $1K each where I live.

⁠@@johnsnow3159you’re crying because a $30 part doesn’t feel like you want it to? Get a grip lmfao

Hi! Thanks for the comment and the question. EDIT: sorry, was in hurry...misread your message...the carry handle is not detachable, it's part of the upper receiver. Both, upper and lower are made out of the same material, some sort of alu-alloy. Not steel, it's not steel even on the real M16. Dustcover- yes, same material as the real thing, but has much lighter gray finish...the real one has a very dark gray,almost black finish... @johnsnow3159 i have edited my first reply...

@johnsnow3159 i have edited my reply, please check. Thanks! :)

@@talesofgear Thanks I preordered one after watching your video. Where I live its only on preorder and it cost $680USD. Its 2month ETA and in the meantime I was looking for parts I think I would need to make it perfect. I thought I saw a video and they said it was plastic and for me its a big problem. I found a metal carry handle that is also 2Months Pre-order and didnt want to buy if I wasnt sure 100%. Thanks to you I probably saved 3-400$ on parts I thought I would have needed like the Handguard and Butstock. Anyways, with you indepth analysis I feel like if it was plastic you would have mentionned it and the fact you didnt spoke about it, makes me think its because it didnt feel like plastic so you didnt waste time speaking on it. Please when you can, comeback to me with the info on the Carry Handle. Cheers Brother.

@@talesofgear wow! Just saved my life with that reply. Thank you. Have a good day.

@@johnsnow3159 i'm working on a fallow up video...i'll be showing what can be done to improve the looks of it and how to make it shoot better :) might be a long video again XD XD

@@DTOF1991 this is a 2-piece kit for the M16 rifle and carbines. Lets you use the usgi 2 point silent sling in a more convenient way🙂👍

hi! get the Colt FCG and lower ;) or mod hammer spring,if the brand of gbbr you have allows the hammer mechanically to be at 90...

@@talesofgear thank you pal, is it possible to do so on a Vfc lower? I mean modify the spring or put a rs fcg in the lower?

@@Wastedland8 i'll take a look on my VFC...but from what i have seen so far i think it's not possible with the stock VFC FCG...it has that adjustment screw etc...not sure a real FCG would fit...or, it might fit but might not work properly with the valve knocker...don't know, would be interesting to test out :)

No...it's airsoft😉👍

Hi! Looks like you have started working there just about when LBT started using the new label >> the silver label. Do you maybe have info till when exactly the old t-shirt tag was used before switching to the silver tag? How long were both of them used simultaneously? When started LBT using OD snap fasteners? How are LBT product codes made? Is there something specific that these number and letters represent? So, what's the idea behind that? Like, LBT-0990A or B, LBT-1195A etc...Feel free to write to: [email protected] Thank you! :)

Thank you! :) Have fun! :)

do you have the V1 or V2 mags? Mine are the V2 and i'm very satisfied. No issues with them. I have no experience with CO2 mags, but IMHO, the way it shoots with GG mags, there is no need for CO2. Stock internals would handle it, but would wear down a lot faster. Only in could weather condition the use of CO2 mags might have sense...in general, the MP5 platform is internally really good on GG. The system works smoothly. I love what VFC did :)

@@talesofgear I have the V2. Im using propane rather than strictly GG so that could also play a role. I can’t find anyone else having the same issue so i’m wondering if it’s a quality control issue or user error 😅 I have a Co2 magazine on the way and interested to see how that will perform vs GG (when it did work)

​@@TowerofTerrai see...any chance you could explain what the problem/issue is? Leaking, output...or something else?

@@talesofgear the magazine dumps/vents all of the gas from the top port on the magazine as I’m charging it with gas. I can’t seem to get the gas to stay inside the magazine. This causes the magazine to become extremely cold /change temperature very fast. I thought this could be due to an air bubble/pocket but even trying to release the air via the knocker valve technique doesn’t work. I can’t get a single drop of gas to stay inside the magazine. This is all done with propane, so it could be due to the adapters (i’ve tried two at this point). I’ve even disassembled the magazine the check on the orings and everything looked fine. My next step is to try regular GG to see if it’s something with the pressure of the propane tanks.

@@TowerofTerra i don't think it's because of propane...i was running my GBB's for a long time on pure propane, rarely adding any silicone lube to it and everything worked fine and still is working fine. IMHO, it's something mechanical...maybe worn out o-rings/dried out o rings...weak spring...or something isn't put back together as it should be...when did this start happening and what did you do before that on the mags? let's start from there ;)

Thank you!😊

@@TowerofTerra Thank you! Noted! Will do on improving☺️👍

Thank you for your comment. Yes, there are different opinions on that...same with the stock etc...if i go by the ref.pictures from the 80s i see more shiny ones...but it's hard to judge by pictures, there are many factors that affect how things show in pics...IMHO, shiny = early, like up to the late 90s...matte= later, like from the early 90s and up...or a mix of both...like, old ones broke and were replaced with new ones...

I'll do my best to make a video on that. Thank you!😁👍

@@talesofgear That’s amazing, thank you! You’ve become one of if not my most favorite youtube channel. You have some seriously great content, keep it up.

@@TowerofTerra thank you so much! Feedback like this keeps me going. Much appreciated!☺️

maybe i'm a vampire :P no sun for me :P It's the LED lightning...XD

Honestly, don't know...have to check that...i know that at some point FN got the contract over and produced the A2's instead of Colt...i bought it as "usgi" piece...so, i don't know the manufacturer...

? 🤔

English please 😊

@@sylithics as i have said in the video, the complete fire control group is steel, while the BCG isn't...i would say that the BCG being other than steel has the same effect on burst as it has on the full auto feature...the auto sear being steel will wear out the bolt carrier on the part where it engages...will see how many rounds i get through it before this happens...i have ordered a steel Z-parts made bolt carrier just in case ☺️👍

@@talesofgear👌🍻

Fully agree! Thank you for your comment :)

Info about the suppressor in this video kzbin.info/www/bejne/eKqrdp1-eJV-bZosi=LV12V2Tp-hsbAxqz

Thank you! :)

Atm the 733 inner barrel, but soon the 360mm inner barrel should arrive and will be installed🙂👍

Thank you! i can feel your excitement! :) i'm waiting as well for the A2...DNA parts getting out of stock quickly XD Take care! :)

@talesofgear yes lucky I ordered in time csnt wait,basically upgraded the whole front end lol 😆 all the best

Thank you! :) Yeah, i'm working on that. Still need a few things to be able to have the BHD Delta configuration done. :)

Hi! Thank you for the compliments :) Happy to see the video is useful. As for your question, i have purchased the GBB with spare mag and parts from Kotte-Zeller, shop in Germany. Hope this helps :)

It's a 2nd gen GHK magazine converted to Devilhunter mod...