Your shock dilema reminded me of a problem my dad and I had with an up- tilted bumper on a 65 Mustang we brought down level. So you all most had the plan when you used the racthet strap to pull the leaf spring over but you were probably a bit wonky a 3am. 😉 Place the floor jack under the leaf spring. Run the ratchet strap or a chain under the jack and and then up and over the frame and connect the ends. Now all you have to do is jack the leaf spring up, and the frame will come down due to the straps. Bobs, your uncle! 👍
@JohnsGarageProjects12 күн бұрын
@@POPPASHANGO You are a genius!!! Thank you for that tip. If I ever get in that situation again I’ll be ready 😀
@POPPASHANGO12 күн бұрын
@JohnsGarageProjects You are welcome! I enjoy the videos!
@mikeellis294414 күн бұрын
Well, I have always wanted to shoehorn a Cummins diesel in a jeep. That would certainly be my favorite.
@rickychowning403924 күн бұрын
I want one
@martinrodriguez799928 күн бұрын
My deepest sympathies for you and your dad. I know what you’re going through but God does miracles and God does bring peace. Love your episodes. Keep doing what you’re doing.
@JohnsGarageProjects28 күн бұрын
@@martinrodriguez7999 Thank you my friend
@ChrisfromGeorgiaАй бұрын
I dig it👍🏻
@RiggyRonnieАй бұрын
You made it better!
@RiggyRonnieАй бұрын
You made it better!
@darrelkinney9856Ай бұрын
Hey man cool video friend of mine worked at a dealership here in NC . 2000s drove one said it was bad ass truck. , owner of the dealership asked him to drive it to get his opinion .
@JohnsGarageProjectsАй бұрын
That’s so cool that he has that memory! I’ll never forget my test drive 😀
@albertchavez7758Ай бұрын
In the early 90,s I worked for Jack Cooper auto transport in Albuquerque , they would come in on the rail and we would truck them on in to Tucson and Phoenix Arizona at one trip I had three on my truck on one load , they were very cool trucks !!
@danecorpgarage8478Ай бұрын
Only non-factory wheels that look right on A Bodies imo
@Mark-vd8oiАй бұрын
THEY CANT BUILD THINGS THIS GREAT TODAY
@zeitlerusmcАй бұрын
And in the squarebody trucks they were power beams
@Jordy-927Ай бұрын
Keep it all original… Just Everyone Else’s Parts 🤣 That’s hot Roding! You do you, I’ll appreciate most any build even if it’s not what I’d have done.
@loganbull92Ай бұрын
Looks good
@danecorpgarage8478Ай бұрын
Nothing like the dim glow of a set of T-3s on a back road at night!
@JohnsGarageProjectsАй бұрын
@@danecorpgarage8478 For Sure!!!
@wildberrygarage4348Ай бұрын
Nice yo
@lilfaded....1400Ай бұрын
Chevelle #chevybaby
@2StallGarageАй бұрын
Very cool
@rustbeltrestorationАй бұрын
0000 Steel wool cuts way faster. I wouldn’t use the polisher unless the steel wool left a haze.
@AlmightyG1969Ай бұрын
Turtle Wax Chrome Polish is the GOAT. It removes rust, and leaves a nice finish. Try it with some fine steel wool.
@JohnsGarageProjectsАй бұрын
Exactly right! Old school goodness!!!
@johnpippin2426Ай бұрын
Turtle wax everything is underrated. I love it
@TheLonelyCowboy1958Ай бұрын
The old chevy wiring is not fun
@castanza128Ай бұрын
I normally just cram a screwdriver up into the turn signal hole, then pry up until it breaks a hole in the column. Then I pop the gear off, and pull towards me on the little metal bar underneath... kekeke vroom.
@JohnsGarageProjectsАй бұрын
@@castanza128 Yikes 😳, certainly a faster method 😛
@HansBelphegorАй бұрын
All builds besides "stance and catback" are valid
@Luverne18700Ай бұрын
My grandma had a brand new 1970 chevelle orange with a white vinyl top. My grandma sold it in 1972 to get a station wagon and has regretted it ever since
@JohnsGarageProjectsАй бұрын
That is a cool color combination!!!
@lawsonsadventurevlogshanel7136Ай бұрын
In the Philippines they put Different motors in them. They still a building Jeep like that. Google philippine jeeps go check them you love it and on KZbin
@JohnsGarageProjectsАй бұрын
Didn’t know that! That’s awesome
@tacticooldennis2 ай бұрын
Two wrongs don't make a right :)
@bryanstotts34662 ай бұрын
I've watched to this point, but watching this extremely rare slat grill military vehicle being further modified is just too much. When you sell it eventually, I will watch the guy who restores it to original spec and does this old war horse justice.
@GRUMPYGUNNUT2 ай бұрын
Im old. I remember that. Worked 90% of the time
@JohnsGarageProjects2 ай бұрын
Not a bad percentage 😀
@tmac87112 ай бұрын
Not true, it could be the 1st year of that model or simply the year the lense was made.
@JohnsGarageProjects2 ай бұрын
True. It was certainly more accurate when auto makers totally changed designs each year
@2willgod2 ай бұрын
Also have the bulb number on the light lenses on a lot of vehicles
@JohnsGarageProjects2 ай бұрын
Never knew that …I’ll be on the lookout for that info 😀
@josephdavis36862 ай бұрын
He said look inside but look along the edges of the tail light instead.
@JohnsGarageProjects2 ай бұрын
I appreciate you helping me explain what I thought was a cool touch on classic vehicles…who knew it would be so infuriating to folks 😛
@zevinelsner86542 ай бұрын
Bro is lying for no reason
@josephdavis36862 ай бұрын
He is not lying
@charleneblack27922 ай бұрын
I think he's trying to pull a fast one.
@josephdavis36862 ай бұрын
He is telling the truth older cars had the year printed along the edge of the tail light.
@dakotagray16102 ай бұрын
I couldn’t see jack
@ScottSchade-m4g2 ай бұрын
How much$$$$$$
@JonnyTsunami2772 ай бұрын
Love how he says you can look in the taillight but with that glare and shit I can't see a damn thing
@JohnsGarageProjects2 ай бұрын
Thanks for the constructive criticism???
@hboyO22 ай бұрын
@JohnsGarageProjects he's saying to film it better next time. Actual constructive criticism btw
@Cuz_Im_only_human_after_all2 ай бұрын
The only thing jeeps are good for is scrap metal if you ask me
@JohnsGarageProjects2 ай бұрын
Ouch 🤕
@SSDPITBULLYOUTUBE2 ай бұрын
I like the jeep
@Josedaniel.Lazos-tk6swtx2 ай бұрын
Cool jeep
@andrewaguilera1262 ай бұрын
Love it....i have a 78...
@dylandurant10582 ай бұрын
I love that jeep. Its on par with the willys rat rod
@automotivekid30262 ай бұрын
If it fast and fun I don’t care just ride with it
@Onyx4082 ай бұрын
It’s your vehicle do whatever you want to it. Usually the haters can’t afford what they are looking at anyways.
@DedicatedSlaya2 ай бұрын
New Sub and, I went back and checked out the Jeep Rescue video... It's sad, that some people would've rather seen a Jeep rot away in the woods, than to be Loved and back on the road. 😎🇺🇲🇺🇲🇺🇲
@JohnsGarageProjects2 ай бұрын
I couldn’t agree more! Thanks for catching the vision 😀
@bantheundead41622 ай бұрын
Meh who care as long as its a bad little machine ❤❤❤
@OGCuckleberryfinn2 ай бұрын
LS7
@GunstockBayA902 ай бұрын
Yeah im going to have that certified check out to you directly. Please ship asap, thank you, pleasure doing business.
@GunstockBayA902 ай бұрын
Federal rs-rr tires. Someone is hooking up. Never seen those on a cj