I think my wife said she went to a show and the cruise director gave the numbers and I think she said about 2800 or 2900. I know tendering into Catalina was so backed up the captain asked people to wait a few hours before going shore. On disembarkation day there was a very long line to get off the ship.
@seasterl8 күн бұрын
Thanks very much. Looks like your boat was packed!
@randyweaver83544 күн бұрын
It was! But the weather was perfect. So I consider us very lucky.
@KhurshidsChannel8 күн бұрын
Nice video. I enjoyed watching it. Thanks for sharing. subd & 👍4
@randyweaver83548 күн бұрын
thanks I see you are getting close to 1000 subs ... congrats. I subscribed to your channel.
@euphoricenergytodaywithlor271718 күн бұрын
Very interesting ❤beautiful scenery I enjoyed watching today thank you 🙏🏻 😊
@randyweaver835411 күн бұрын
Glad you enjoyed it. Fall was such a beautiful time to visit.
@euphoricenergytodaywithlor271721 күн бұрын
Really enjoyed this journey of learning about the Canadian Rocky Mountains itself is amazing 🤩 I did the Rocky Mountains in the USA on the Empire builder super liner ride three days two nights of beautiful views and amazing!Im in Astoria Oregon at the mouth of the Columbia Rivers also known as the pacific graveyards of thousands of shipwreck captain goerge Flavel! I am going to British Columbia next year ❤
@randyweaver835418 күн бұрын
So glad you enjoyed my video and have wonderful time in BC. Of course your area in Oregon is every bit as beautiful as BC. I loved our Rocky Mountaineer vacation. We also did the Rocky Mountaineer trip from Denver to Moab Utah. The scenery is very different but spectacular on both trips. I will try to find those videos and put them on KZbin. We have so many travel and cruise videos dating back to 2019 it’s difficult to locate the ones I want to work on.
@euphoricenergytodaywithlor271718 күн бұрын
@@randyweaver8354 I’m just thankful to see how beautiful everything looks and thanks for responding I appreciate that and I’m sure you will find something to suit your mood and mindset when you’re editing your work and you can throw in some meaningful memories onto your a footages I love it 😻 and your welcome 🙏🏻 of course
@VivianCastillo28 күн бұрын
Nice share!
@randyweaver835427 күн бұрын
Thank you. I didn't think anyone would look at this video except me.
@Franky46Boy29 күн бұрын
Cars, planes and trains...
@randyweaver835429 күн бұрын
good point. I corrected the title
@Franky46Boy28 күн бұрын
@@randyweaver8354 👍 Great! I gathered you don't really hate planes (there were a lot of them...) and you also know something about them. I LOVE aircraft! Nice that you shared your visit to that museum.
@randyweaver8354Ай бұрын
Hi John, thanks for watching my videos. I hope you and or other people get something useful from these. It does take time to edit and upload. Kind of like volunteer work. I think KZbin is a wonderful platform. Most of the videos I see on KZbin are people trying to help other people (like how to fix a rug doctor carpet cleaner- my most popular video). On the subject of Europe, because of the European Union, going from country to country is more like going from state to state in the US. Having a single currency like the Euro helps even if you are using a credit card because you can do a quick calculation in your head on how much in dollars something costs.
@chiona123Ай бұрын
I am surprised at how relatively close France, Germany and Switzerland are to one another. Good choice, Randy, to select pizza over a loaf of French bread.
@chiona123Ай бұрын
Excellent video Randy! I am so glad that both you and Kate continue to see the World by cruising. Budapest seems to be an ancient, but lovely city. I learned something new from you both. I did not know that 'The White Bridge' separated two separate cities, Buda and Pest. Hence the name, Budapest. I finally was able to see 'The Danube River', thanks to you, if only in a video. I thought that the water would be a more distinctive shade of blue. You both sure have done a great deal of walking. Enjoy your new cruise in Jamaica! I greatly miss talking with you both over our dinners on Princess-especially in the specialty dining. John Russo
@randyweaver8354Ай бұрын
Thanks John. Glad you enjoyed the video. We have so many videos from our travels that I just decided to start putting everything on KZbin. They are just sitting on a hard drive and I thought that maybe somebody could get some benefit from them and sounds like you did. Hope we get to cruise together again someday.
@chiona123Ай бұрын
Thanks for the kind words, Randy. I will definitely watch the other videos. I would enjoy cruising with you both once again.
@mitchvass44986 ай бұрын
Nice job thanks
@randyweaver8354Ай бұрын
Thank you too!
@clearbrain7 ай бұрын
Smaller enclosure sounds better.... around 15/20 ltrs ...max for alpair 10 I experimented with lots of sizes and came to the conclusion.... Your speaker has emphasized upper and lower midrange which takes away the clarity
@buzdugmarius78765 ай бұрын
I guess you're talking about vented box. This is Pencil , something else. I also have it in 15 vented but it needs a subwoofer
@olhesty219610 ай бұрын
for lubrication, I highly suggest using silicone grease. Very few solvents are able to remove silicone grease. I learned this the hard way, but never let that grease anywhere near a HVLP or LVLP sprayer!!!
@pnojazz10 ай бұрын
Great job! Exactly, break them in!
@scottcov56 Жыл бұрын
My Rug Doctor pump was not exactly like this as only one end unscrewed, but close enough. I removed the pump, unscrewed the end, took out the parts, made sure all valves moved freely, reassembled the pump installed, works perfect. Thanks for the video.
@randyweaver8354 Жыл бұрын
glad it helped
@Jonawolff15 Жыл бұрын
How long in the white vinegar
@randyweaver8354 Жыл бұрын
I did overnight
@scottkemp917 Жыл бұрын
Good job, saved me $90. Knocked mine out with a socket. Used 600 grit rolled up in a tube to clean the inside
@buyselllasvegas7404 Жыл бұрын
Hi Randy I have a pump that look likes that one but when I open it it is very different. Since everything fell on the ground when I open it I don’t know how to put it back together the right way. Any suggestions?
@hamzatatta952 Жыл бұрын
can you send the link to the 10.3 and 10p, please?
@oldmantech5399 Жыл бұрын
Great video Randy. My pump was stuck tight. A lot of cleaning but, pump now works like a champ. Thanks for giving me the confidence to take it apart.
@hamzatatta952 Жыл бұрын
Hi. I have the same 10 P. It’s nice with jazz n vocals but the high frequency are not great n details could be better but on hearing your the detailed sound better than mine how do yours get yours to sound like that and which amp and source are you using ?
@randyweaver8354 Жыл бұрын
sorry about my slow response, I don't usually get questions. I actually had a similar problem when I first listened. Here are my other components: Speaker amp is a "tube cube" I bought from tube depot. For a preamp I am using a Schiit Vali headphone amp. The source and DAC is a raspberry pi with Volumio installed and an upgraded power supply with a Schiit Modi. I think it sounds great, but it was frustrating at first because it didn't sound very good. Here is how if found out that I had a problem. First I downloaded a program for my iPhone called "speaker meter" I think it cost a few dollars. I connected it through the headphone inputs. and used to to automatically measure the frequency response of the speakers in the room. I found that I had big bump in the 70 hz range which overpowered the high frequencies so I changed the position of the speakers in the room and heard an immediate improvement. I remeasured the frequency response and it was flat instead of the 70 hz hump. According to the "speaker meter" software, my system starts to roll the high frequencies off at about 15kHz. I tested my own hearing and I can't hear much about 15khz so I am perfectly happy. The system may be flat to 20khz and the iPhone is unable to measure those high frequencies because I am just using the built in microphone. Hope this helps.
@hamzatatta952 Жыл бұрын
@@randyweaver8354 hi it’s ok about the late response, I was going to sell them because of the same issues but I begun to playing with the position and now it’s sounding great . I am using a quad 303 and will be getting a tube buffer and a class D amp I met this guy who is very knowledgeable and has thought me a lot so I can not wait to try them out and then in the future get a supper twitter.
@hectormedina9009 Жыл бұрын
level pump/?
@spockmcoyissmart961 Жыл бұрын
I used a tooth brush and Bon Ami to scrub the inside of the tube. I use a fine plastic dish scrubber on a sponge with Bon Ami on the outside sleeve. I then soaked the plunger in cleaning vinegar. Just an update, I used my machine tonight and all worked great. I used to have a leak when I parked it to move furniture, it doesn't leak anymore either. Pump works fine. I tested my pump before I reinstalled it. I put insulated alligator clips on the 120 volt motor leads which are on a small power cord I made up, I hooked up a hose and held it under the faucet and let cold water run by gravity into the pump. I turned on the pump with my extension cord and it worked great!
@markgolden8710 Жыл бұрын
The rolls Royce of carpet cleaners but when they break - problems! Can’t find anyone to work on them !
@sylviaflores79412 жыл бұрын
How do u find and install??? Love the quick fox tbough 😊$$$
@randyweaver83542 жыл бұрын
Here is the link to remove the pump. It is also down below. kzbin.info/www/bejne/mpankIBmrLJmqZo
@hoobsgroove2 жыл бұрын
there's no dividing panel no! I would put one in. what did you use for dampening then? nice happy with it
@sux2bu8832 жыл бұрын
@ 1:06 the plans call for 1.35 pounds of poly fill .
@sc0or2 жыл бұрын
This layout needs few ribs for sure.
@randyweaver83542 жыл бұрын
Below is a link to the disassembly video
@randyweaver83542 жыл бұрын
kzbin.info/www/bejne/mpankIBmrLJmqZo
@scotta91142 жыл бұрын
Thanks for your video. Done very professionally and informative. Now I need to figure our how to get to the pump. This Rug Doctor is a real piece of junk. We should have bought the real deal.
@randyweaver83542 жыл бұрын
There is a video on disassembly entitled "DDC pump" that shows how to get to the pump.That one was uploaded by Rug Doctor. I had a Bissell prior to the Rug Doctor and gave it to Goodwill because the pump stopped spraying. Since this seems to be how these things fail, I suspect you could fix any upright carpet cleaner using the same method.
@godspeed442 жыл бұрын
Thanks for making this video. There's not a lot of visual information about these speakers and it's nice to see. They look great.
@randyweaver83542 жыл бұрын
Glad it was helpful!
@victorrios89472 жыл бұрын
Thanks for the video. I fixed the pump with your guidance. I have to admit I had more problem getting the final top cover on navigating over the wires and the vertical switch which is the the way.
@oldmantech5399 Жыл бұрын
Had same problem with switch so, used a rotary tool and sanding drum to remove some plastic on bottom of hole in cover to allow easier slide-over.
@theoldfart4542 жыл бұрын
ok i see that you put that it didnt work till you polished the piston but my question is is there a way to put power to it while you have it out to see if it actually works or not
@randyweaver83542 жыл бұрын
I didn't try to power it up without reassembling. I just figured I would keep working on it til I got it to work however long it takes.
@martinantonisamy31392 жыл бұрын
This video is very helpful. The exact part is not available in the market and it saved dollars. Thank You.
@Mrch33ky2 жыл бұрын
Nice work! Thanks for sharing. :) I just finished a Mark Audio Tozzi kit build and the spec sheet recommends 100 hours(!) at very low volume and then gradually bringing the volume up to normal listening levels over a few weeks. A bit of work but may be worth it.
@randyweaver83542 жыл бұрын
Thank you. Ive had people ask where the center speaker is because the vocals were so centered. Ive also had movies playing and can hear sounds behind me. All from just two speakers.
@godspeed442 жыл бұрын
I built a Tozzi kit as well and am amazed at the quality of sound for near field listening.
@sistimblue2 жыл бұрын
Thank you for posting this helped me out !
@randyweaver83542 жыл бұрын
Glad it helped!
@jimmellenberger85052 жыл бұрын
Now to find out if this video just saved my buns... I'm gonna take my classic Wide Track apart and see if this is not my problem before I start spending money. I would be so relieved, and so would me son.
@ryansgale223 жыл бұрын
Hopefully this works if it does you saved me $500. I have the whole thing apart and I am alomst to the pump.
@pullbackbaby3 жыл бұрын
Thank you for this. I cleaned up the other version of the unit and Viola!!
@erickay45973 жыл бұрын
THANK YOU!!! I was about to sell mine for parts, then came across your video, and now it works perfectly!!
@randyweaver83543 жыл бұрын
You are welcome
@liquidfluidity80613 жыл бұрын
Excellent vid! I have a question about the cylinder - I have the Jiayin pump which is minimally different. I think it was a replacement for the one you have or vice versa. My question is - should the copper cylinder come out? Mine does not seem to want to. The 2 sleeve halves and plastic ring turn but not very freely. Is this an issue as long as the piston moves freely within the cylinder?
@randyweaver83543 жыл бұрын
To be honest I don't really know. I generally take broken things apart and try and figure out how that work and try and fix them. That was the case with this pump. So Here is my best guess. I think the plunger, spring and check valve are the working parts that need to move freely (BTW- I would like to reserve the right to be completely wrong). I believe that the sleeves and plastic washer may help with vibration damping. Again just a guess. Best of luck - let me know if you get it working.
@owenhobbs38273 жыл бұрын
Thanks for posting this. Mine wasn’t all that bad but after cleaning it up, it worked again.