😊 Yesss, you guessed right! Maltese here! Grazzi 🙂👍🏼

Haha, no worries! Your English is great and I fully understood your feedback 🙂 Yes I do sometimes use a hairdryer, but only when I need the decal to fix onto an unusual surface, like that front spoiler for example! I agree with you, getting the decal slightly warmer + using decal softener makes it more flexible to take the shape of the part being covered 😊 Thank you for your feedback, I'm glad you like my work. Very appreciated 👍🏼

@KarlScaleModeling I'm so glad that you understood my feedback because it's my first comment in English. Good luck this year💪

Ohh I see, I'm lucky to be the first one to receive an English comment from you then 😊 Thanks again for your support and all the best to you too for this year 👍🏼

Awesome 😊 Thank you my friend for your feedback, that's very appreciated like always 👍🏼

Thank you my friend for checking out the video and leaving your feedback. So glad you like my work👍🏼

Thank you sir, that's very appreciated 😊👍🏼

I mean R33.

Thank you for watching and leaving your feedback, that's very appreciated 😊 so glad you like the opening hood 🙂👍🏼

No problem, understood 🙂 thanks again 👍🏼

Thank you, that very appreciated and so glad you like my work 😊👍🏼

Awesome, so glad you like my work 😊 thanks for your feedback 👍🏼

Hello Richard, I did an online search and did not manage to find a 1994 Toyota Corona diecast car, not even the European, Carina version. Looks like companies did the older version and also the newer Corona Exiv in various scales, but not the 1994 model. I'll keep looking and let you know if I come across something 👍🏼

Thank you for watching the video and leaving your feedback. That's very appreciated 😊 I'm glad my tutorial helped you about the blade adjustment. Yeah, that's the reason I did the cuts on the green cutting mat and adjusted the blade accordingly, to try to avoid cutting the wooden-like mat into tiny circles! 🙂

Thank you for viewing and leaving your feedback Andrew, that's very appreciated 😊👍🏼

You're welcome sir, very glad you found this tutorial interesting and will also try it out yourself. Thank you, very appreciated 😊👍🏼

@ no thank you. I make Hot Wheel custom so it’s metal. But I want my clear to pop more and this should do it 🤙🏽🤙🏽🤙🏽

Oh I see, custom Hot Wheels are cool. I definitely need to take a good look at your channel then as I love HW customs! I also did custom ones some time ago, so fun! Yes this is a good method to remove orange peel and have a nicer, deeper shine. Take care not to sand through the clear as polishing a small HW might be trickier, but I'm sure you'll have a great result in the end 👍🏼

Thank you very much sir, that's very appreciated 🙂 both for your kind words about my work and also for subscribing. I also subbed to you and will check out some videos later as I love 1/64 diecasts too 😊👍🏼

Thank you for watching and leaving your feedback my friend 👍🏼 that's very appreciated, like always 😊

Hello, the GH-10 Burr Set bits have a 3mm shaft and are dedicated to be used with the Dspiae ES-P rotary tool, which also has a 3mm opening. They can be used for various applications like sanding and drilling. Not sure about the drill bits problem, maybe they're 3.175mm. That's also a common diameter when it comes to modeling tools. Hope that helps 👍🏼

Hello Andrew, thanks for watching the video and leaving your feedback. That's very appreciated 👍🏼 Yeah, collet is the right word for those adaptor pieces. Not sure why I always call them shanks! 😊 Exactly, I would have been happier if the chuck was fully adjustable, like the cheaper one I showed. Looks like Dspiae wanted to keep the use of this hand drill specifically for their Drill bits only. Thanks again 👍🏼

Thank you very much for your feedback, that's very appreciated. I'm glad to hear you've been using this rotary cutter for 2 years and still happy with the way it works. My plan is also to use it for masks on models, maybe for disc brakes and round lamps. Fully agree with you about precise cutting, definitely not always easy when you need those type of masks (like the roundels). Once again, thank you 👍🏼

Hello Chris, thanks for your feedback. Judging by the size of the blade and how fragile it looks, I also think that it's intended for thin material. Luckily, I only plan to cut masking tape with it. And maybe my wife will use it for some paper crafts. So we both should be safe cutting what we planned without damaging it 😊

Mercés per vòstre messatge. Pasmens ai pas plan comprés lo messatge. Se pòdes explicar un pauc melhor, aquò seriá apreciat.

@KarlScaleModeling no que no!🤔 Jman

Hello Jeff, thanks for watching the video and leaving your feedback. I'm not sure if the round one was released before the one I tested. My friend has one like mine and was getting some good round masks out of it, and that's what encouraged me to buy this instead of the round metal! Yeah measurement adjustment system could benefit from some updating honestly. You could get a perfectly sized round mask, but I guess it will take a couple tries adjusting the rough scale. An extra blade? Definitely 😊 Considering how fragile it is, an extra one would have been lovely! But they sell them separately.. in a set of 3, so that may be the reason why they just give you 1.. marketing 🙂 The best thing would be if the next model has a digital display, like a digital vernier for example, with decimal places! That would be accurate for sure 😊

Здравствуйте, спасибо за ваше сообщение. Очень ценю. Я не уверен в точных различиях между разными моделями дисковых фрез Dspiae. У моего друга есть PT-C, и он всегда говорил мне хорошие отзывы о нем, поэтому, когда я решил его купить, я сразу же остановил свой выбор на PT-C. Я знаю, что есть еще две модели, и слышал хорошие отзывы о MT-C в сочетании с Locator. Но сам никогда этим не пользовался. Извините, что не смог вам помочь, и еще раз спасибо за просмотр.

Thank you sir, both for watching and leaving your kind feedback 😊 That's very appreciated and I'm glad you like the rotary cutter 👍🏼

Thank you Owen John, that's very appreciated and so glad you like my video 😊👍🏼

Haha, I hadn't noticed that precaution before, but now I can't unsee it.. I hope they had something else in mind when writing it 😅 Thanks for watching and leaving your feedback, that's very appreciated. I definitely won't be using this cutter frequently, but I'm glad it's there for when the time comes! 😊👍🏼

De rien, je suis toujours heureux d'aider les autres et je suis heureux que vous ayez trouvé ma vidéo amusante ! Cela signifie beaucoup pour moi 😊

Bonjour, merci d'avoir regardé et laissé vos commentaires. Très apprécié et je suis heureux que vous ayez aimé le regarder 🙂 J'achète toujours mes produits Dspiae chez Aliexpress. Ils proposent généralement une large gamme de produits. J'ai trouvé ce vendeur qui propose un lot de 3 lames de rechange pour 7,67 Euros livraison gratuite 👍🏼 a.aliexpress.com/_EjwRH2c

Thank you Kevin, your subscription to my channel is very appreciated 😊 I also subscribed to your channel, that pick up truck in the profile picture looks awesome 👍🏼

@@KarlScaleModelingone of my favorite builds! No content on my channel yet! Thanks Karl👍🏻

Well done for that pick up build, no wonder it's one of your favourite 👍🏼 no problem Kevin about not having any content, maybe in the future you'll upload your first video and KZbin will let me know about it 😊👍🏼

Здравствуйте, спасибо за ваш отзыв. Очень ценю. Когда мне нужно отполировать небольшие участки, например воздухозаборники, я использую ватные палочки (те, что для ушей). Нанесите на них немного полироля и полируйте медленно, с минимальным нажимом, чтобы не поцарапать. Надеюсь, это поможет.

@@KarlScaleModeling спасибо за ответ! Я понял 🤝

@alekss9024 Приятно это знать. Спасибо за ваш отзыв. 😊👍🏼

Thank you very much Ken, that's very appreciated and means a lot to me 😊👍🏼

Hello Mike, thank you for subscribing. Very appreciated. I also subscribed to your channel and will take a look at some of your videos too 😊👍🏼

Thank you my friend, your constant support towards my work is very appreciated 😊👍🏼

Thank you very much for watching and leaving your feedback. That's very appreciated 😊👍🏼

Thank you.. Happy New Year to you all too, from tiny Malta 🙂

Thanks for your feedback. To be honest, I won't be using it daily or even weekly either! But I'm glad it's in the tools drawer, for that time I would need a custom round mask 😊

Neither does MOST People ! lol

I'm sure of that! I think people doing paper crafts might have a frequent use for it. But as a modeller, I'm glad it's there in my drawer waiting to be used! I'm sure I'll use it a couple times while building a car model kit, especially for the disc brakes as shown 😊👍🏼

Thanks for watching and leaving your feedback Mike, that's very appreciated 😊 Also thanks for sharing the information with us all about your custom paint mixers! I also love the Dspiae tool, and had never thought about such an idea! Yeah it's important for it to be nice and straight to avoid any wobble that might cause damage to the chuck. Well done and I'm sure you're finding it useful. I do have the Dspiae paint mixer, even made a review about it. It's good, however you need to remove any balls inside the paint jars to insert the appropriate stainless piece from Dspiae. Thanks again Mike 👍🏼

Thanks for watching and leaving your feedback Todd, that's very appreciated. Also thanks for subscribing, I have subbed to you too 😊

Thanks for your feedback, that's very appreciated. I'm glad this video could be of help to you 😊👍🏼

Hello Michael, thank you for watching and leaving your feedback. I'm glad you like my review. Positioning the circle cutter exactly at the perfect spot might not be easy, from what I could see during the testing. You have to find the exact center of the item you're cutting and then try placing it exactly in the middle of the circles at the bottom of the cutter, which ain't easy agreed. Did you try AliExpress for the positioning tool? I find Ali as the best stocked and best priced when it comes to Dspiae products. Maybe they have it in stock. Now that you've mentioned it, I'm also curious to purchase it for myself too 😊

I have the positioning tool and it works well!

Thank you for your feedback Wayne, very appreciated. Do you know the model code of the positioning tool? Is it the MT-CL? That looks interesting.

Hello Nigel, thank you for watching the video and leaving your feedback. I agree with you about not being able to carry out a precise adjustment. The measurement knob is a bit rough, but I can definitely get better sized masks then shown in the video. Due to the camera I couldn't focus well on the dial markings as I was looking through the display, so I'm looking forward to make several other mask trials. Hopefully these will have a better, more precise fitment.

@ I am surprised no one has made on with a fine screw adjustment. Like, when the mask is just 1mm too big or small it is very hard to adjust by 0.5mm with just the designs we have today.

Fully agreed there Nigel, I think the best solution would be if some company invents a circular cutter with a digital display. Like for example the ones found on digital vernier calipers. That would definitely be very accurate up to a fraction of a mm. Maybe in the near future 😊

​@@KarlScaleModelingtakie urządzenie już istnieje od dawna a nazywa się PLOTER

Thanks for the information, will do an online search about Ploter and see what information I turn up 👍🏼

Hello Joe, thanks for watching and leaving your feedback. The high end looks awesome, was tempted to get that one but I saw great reviews on the PT-C and got that instead. I'll keep an eye out for the knock offs then, definitely prefer the original Dspiae ones. Thanks again 👍🏼

Thanks for watching and leaving your feedback. I tend to use this mostly for mixing 2k Clear and Primer in the glass beaker. Other paints I mix them manually or with traditional paint mixer as I find it easier than having to remove the ball bearings inside.

Thank you for watching and leaving your feedback my friend. That's very appreciated and I'm glad you like my work too 😊👍🏼

Haha, JTCC cars are so nice 😊👍🏼

Thank you for watching and leaving your feedback, that's very appreciated and so glad you like my work 😊👍🏼

Thank you my friend, your support towards my work is always very appreciated 😊👍🏼

Hello Jan, thanks for watching and leaving your feedback. Very appreciated like always. I'm glad the Huracan is your favorite Lambo, because it's mine too 🙂 Yeah too bad it has no engine details at all, however the way the engine cover is, no engine will ever be seen because it'll be completely covered. The Murcielago LB has engine details but the newer kit (green one) completely covers this too 🫤 Yeah mine will be in the original Arancio Argos colour. I had completed the body before I started working on the Supra and you can see it here: kzbin.info/www/bejne/fZmbhKxugsaJZ7M Hope you like the way the body looks and thanks again 😊👍🏼

@KarlScaleModeling Ahhh now i remember that body. The one you did the how to polish video on. That body was looking awesome. I send you next week i few pic,s on the E-mail of a blue AMG GT 3 and a Ford Mustang GT 4 in a Marlboro fantasy livery wich is almost done. Than starting the McLaren Senna in the camel livery wich Senna used in his time at Lotus F1.

Yes exactly Jan, the same Huracan used in the tutorial video too. As soon as I received the Alpha Supra I put the Lambo aside. Now that the Supra is done, I resumed work on it. Yeahhh sure, feel free to send an email whenever's good for you my friend. Always glad to receive pictures from you of your builds and work. All 3 builds sound amazing, looking forward to see that Marlboro Mustang especially. Thanks again for your support towards my work 👍🏼👍🏼

@@KarlScaleModeling laying the last hands on that mustang. but got again chemo,so things are not gooing as fast . tomorrow and between x-mas and new year. then i am hopefully finisched with that. I just ordered a lamboo huracan. and those pads with that velcron are polishing amazing good. thanks for that how to do video

I wish you all the best for your treatment Jan, really hope that you're finished with that too. I'm glad you like the polishing tutorial, I'm sure you'll have great result with the velcro polishing pads. Same as I do too. Cool about the Huracan, is it also an LB or standard version?

Thanks for checking out the video and leaving your feedback my friend, that's very appreciated 😊 same as mine then! I found this set hidden in a box at my parents garage! Had completely forgot about it but I'm so glad it resurfaced once again after many years hidden! Good luck, maybe you'll manage to locate your micro machines too someday 🙂👍🏼

Thank you, that's very appreciated 😊👍🏼

Yeah I also had completely forgot about it! Went searching for some old tools and found it looking at me inside the first box I opened 😀 good luck with yours, maybe you'll manage to locate it too 😊 thanks for watching and I'm glad this video brought back some memories for you too 👍🏼