has any one tried accordo yet and having issues? i get to the end of the wizard (where it counts down before it starts taking its measurements) and the whole program (bit drive) closes. I'm using a Dayton audio umm-6 mic

존나 쩌는 앰프중에하나.

I'm unable to get the accordo output level calibration signal into the green level even with the volume set to +6db and the minidsp calibrated mic setting at maximum in the windows settings. I'm stuck on signal low and unable to progress to the next step.

I have downloaded it but the accordo isnt on there when i click on the wizard?

Is anyone else getting a flash error when trying to update Forza firmware?

So simple, even us sales guys can do it! Thank you guys for always taking user-friendliness into account with your software, on top of building fantastic products across the lineup!

i've got this installed in my seat leon. this is the most complicated piece of crap ever made. do not buy this unless you are an expert in setting EQ. christ, this is so ridiculous and pathetic. how are we expected to tune this? this is a huge waste of money. just get a normal amp. avoid this!

C8.14 f2O ile 2 adet optik bağlı bcon go uygulama üzerinden optik-1-2 seçimi yapamıyorum.

The advert shows the software on a MacBook ? Is it finally gonna be compatible 😮

🎉🎉🎉🎉🎉🎉

So, am I right there will be a new upmixer function?

Can it be use in an old prima bit amplifier?

From where to download and how to update the software ?

Where can i dowload it?

Hopefully, we will be able to do/change our DSP Tune from an iPhone...!

Juhuuu!!! Accordo ist coming :)

Does it work with Forza AF M12.14 bit ??

i need connect this, how install?

Que gran explicación ❤ saludos desde Perú

A technical question... We know that the Forza amplifier has an integrated DSP that can “individually” control all the adjustment settings of a speaker, for example a Mid-Bass. But when I choose to make that type of bridge connection, for example using channels 1 and 2 together to feed a mid-bass, what happens to the entire sound configuration, in the DSP, for this specific mid-bass? If I am feeding this mid-bass through two channels of the amplifier (channels 1 and 2 at the same time), then do I have to repeat all the adjustment settings (frequency cut, time alignment, etc.) on channels 1 and 2 of the DSP? Or is there some feature in the DSP where I only need to choose one of the two channels to make the adjustments and I can disable the other?

One question... Audison has these three lines of speakers: (1) Prima, (2) Voce and (3) Thesis. What are the differences between these three lines of speakers?

My head unit is an Android player (Nakamichi 5960 pro) with optical toslink out. Do you recommend to connect the head unit and dsp amp (AF M8.14 has optical in) with optical cable?

My head unit is an Android player with optical toslink out. Do you recommend to connect the head unit and dsp amp (AF M8.14 has optical in) with optical cable?

Which tutorial shows how you configure the AC link stuff?

I don't see any E curve file when I pick reference curve. I have latest software. AF C8.14 bit

What track are you using to do the acoustical tune? Pink noise?

Is there a place in the software to use a calibration file for a measurement microphone, e.g. used in video UMIK-1?

Do you have an installation guide for the Audison Forza AP8.9? Is it the same concept? I have an F82 M4 with under seats subs, and the channelling would be slightly different?

When you run the setup wizard I assume you do not want speakers hooked up yet?

Tempted to buy AP F8.9 bit. . . Will work with this software ? Bit drive

Promo-SM 🙋

Is it work in audi a3 2015

Will it be available in USA?

Yes!!! Need this and need to link to buy.

Is there a link for the product?

Please note there is new SR 6.600 6 channel amp capable to run a full 3 way system front stage I’m switching my voce 3 way speakers fully active with this new 6 channel amp. This new amp is also HI RES AMP the first one in this segment of amp to be rated hi res

There are some client experience says operating temperature range 0-55 C degrees older models. Have new model some issue I mean under 0 C degrees is any problem some forums talking about it. I just bought new forza af c8.14 bit I just want to know if temperature effects the performance I return my amp to seller. Because in my living city some times weather could be under 0C degrees . Please could you respond to me soon.

what if you have a center channel?

I have downloaded this app, I have the B con and I’m using the prima afp 8.9 bit amp…the app isn’t finding the B con though, do I need to do the latest updates first in order to fix this?, I also am using the drc controller…please advise

Thankyou Audison for launching this app

I want to ask if I would need the drc or i control on b con go app on iphone I have forza c4.10 kindly give feedback

Boom 💥 Nice one audison

So far in 2 audison amplifiers I have seen that input equalizer is not working. I tjust shows blank for all signals. Auto tuning also fails. Do you guys know a solution to this? Audison's support is not helpful in this regard.

I do not recommend any DSP from Audison & Hertz to anyone who live in a cold weather. I can't believe they even sell it in so many countries where is cold weather. They operate in 0 - X degree range. At -8 degree on cold winter on my side, it died on the second winter. You can see it in specs also. Probably if you live in countries without cold climate where temps do not touch 0 degree it is ok. I've spent good money on Audison Forta 8.9 bit + lot of other staff and my amplifier died second winter in the cold. This was a waste of money and I would like to make sure other knows about it when they want to purchase Audison or Herts electronic stuff. Guys, you should look at their specs: Operating Temp Range. I replaced amp with alpine one that operate fine from -10 as amplifier and DSP from Helix which operates from -45 degree(WOW) guys. I documented myself and I found others with same issue, audison and herts stuff dies in cold.....

I do not recommend any DSP from Audison & Hertz to anyone who live in a cold weather. I can't believe they even sell it in so many countries where is cold weather. They operate in 0 - X degree range. At -8 degree on cold winter on my side, it died on the second winter. You can see it in specs also. Probably if you live in countries without cold climate where temps do not touch 0 degree it is ok. I've spent good money on Audison Forta 8.9 bit + lot of other staff and my amplifier died second winter in the cold. This was a waste of money and I would like to make sure other knows about it when they want to purchase Audison or Herts electronic stuff. Guys, you should look at their specs: Operating Temp Range. I replaced amp with alpine one that operate fine from -10 as amplifier and DSP from Helix which operates from -45 degree(WOW) guys. I documented myself and I found others with same issue, audison and herts stuff dies in cold

I do not recommend any DSP from Audison & Hertz to anyone who live in a cold weather. I can't believe they even sell it in so many countries where is cold weather. They operate in 0 - X degree range. At -8 degree on cold winter on my side, it died on the second winter. You can see it in specs also. Probably if you live in countries without cold climate where temps do not touch 0 degree it is ok. I've spent good money on Audison Forta 8.9 bit + lot of other staff and my amplifier died second winter in the cold. This was a waste of money and I would like to make sure other knows about it when they want to purchase Audison or Herts electronic stuff. Guys, you should look at their specs: Operating Temp Range. I replaced amp with alpine one that operate fine from -10 as amplifier and DSP from Helix which operates from -45 degree(WOW) guys. I documented myself and I found others with same issue, audison and herts stuff dies in cold

I do not recommend any DSP from Audison & Hertz to anyone who live in a cold weather. I can't believe they even sell it in so many countries where is cold weather. They operate in 0 - X degree range. At -8 degree on cold winter on my side, it died on the second winter. You can see it in specs also. Probably if you live in countries without cold climate where temps do not touch 0 degree it is ok. I've spent good money on Audison Forta 8.9 bit + lot of other staff and my amplifier died second winter in the cold. This was a waste of money and I would like to make sure other knows about it when they want to purchase Audison or Herts electronic stuff. Guys, you should look at their specs: Operating Temp Range. I replaced amp with alpine one that operate fine from -10 as amplifier and DSP from Helix which operates from -45 degree(WOW) guys. I documented myself and I found others with same issue, audison and herts stuff dies in cold

I do not recommend any DSP from Audison & Hertz to anyone who live in a cold weather. I can't believe they even sell it in so many countries where is cold weather. They operate in 0 - X degree range. At -8 degree on cold winter on my side, it died on the second winter. You can see it in specs also. Probably if you live in countries without cold climate where temps do not touch 0 degree it is ok. I've spent good money on Audison Forta 8.9 bit + lot of other staff and my amplifier died second winter in the cold. This was a waste of money and I would like to make sure other knows about it when they want to purchase Audison or Herts electronic stuff. Guys, you should look at their specs: Operating Temp Range. I replaced amp with alpine one that operate fine from -10 as amplifier and DSP from Helix which operates from -45 degree(WOW) guys. I documented myself and I found others with same issue, audison and herts stuff dies in cold......