Timothy DC

Пікірлер

@robertmcmahon2744 10 сағат бұрын

Hey, great video. Just saw it today(9/30/2024) How much total hour time did you end up putting into the entire project??

@Mike137dd-v4r 13 сағат бұрын

I'm going through my grandfather's old tools getting some refurbished to pass on to my grandsons. The five Disston saws I have are in far better shape than this one. The etching is clear as day on all of them. Even the oldest just needs a little touching up. Other than the handles, I may just leave them alone.

@thedonofthesouth 6 күн бұрын

Thanks for the tips. I need to move water to the other side of the house as well. Your method is a lot simpler than the other vids I watched

@angiemarshall1088 6 күн бұрын

Connecting rod pin works its way out and chews a hole in the crank assembly cover..can lay it on its side without the plastic cover and pin falls out on mine

@MrBucidart 7 күн бұрын

Deal of the Day, my wife bought me one for$74.99, dang I love here. . 9/23/24

@reloadNshoot 7 күн бұрын

Came across an ad today on YT about this tool, Aug 2024. HF had them on sale at $74.99 so i purchased one. Ill be using it on wood so i hope it does ok.

@josephhall2858 8 күн бұрын

I was.just gifted the same gun because it was broken, hoping this is the same issue, thanks for the video!

@dorteramacey5672 10 күн бұрын

Johnson Charles Brown Paul Thomas Margaret

@fearlocity1127 11 күн бұрын

You just made me 500$

@cycology3 17 күн бұрын

sigh... how do you load the nails?

@911bkd 18 күн бұрын

Can you leave the original faucet on all the time so you don’t have to go back and forth whenever you want to use new faucet?

@nimster64 19 күн бұрын

Where can I find the chain and the gasket?

@Wurdswurth 20 күн бұрын

Ethanol and carburetors don’t mix. It will mess up a carburetor. You have to use “clean” gas aka the gas we had back in the 80’s. It usually has a blue label at the gas station.

@the_snowman873 22 күн бұрын

how did you pull the hose out of the gas tank

@noneyaonenoneyatwo2879 24 күн бұрын

Awesome! Im getting setup to start blacksmithing and this is the exact setup i am set upfor! I have a 4 ft rail and 3 plates. I intend to weld two plate to the rail and nail to one log ripped down the the side. I love your hardy hole concept. Its been nine years since this video is there anything you would suggest not doing?

@teresadameron-z5s 27 күн бұрын

@Timothy DC Nice work and I'm hoping you can tell me if tines for other brands will work on the 14" version of this tiller. I can't find tines listed to fit the Craftsman Model 917.294260 (or maybe some generic tines that I missed when searching) thanks in advance!

@waldroncandi 27 күн бұрын

We call that a dog run.

@BO_Riddle Ай бұрын

had no idea sunflower seeds come from a sun flower, thats so crazy.

@LencaTecumseh Ай бұрын

annoying music! JEsus!

@jeffmullinix7916 Ай бұрын

Check that reed and see if it is seating properly . There should be no gap between the reed and black spacer . Do NOT BEND THE REED , If you do you done screwed the pooch . 1. Remove carb , 2. Remove the black reed spacer . Do not take the two screws out . Just remove the spacer with the reed for now . Any work done to carb and the spacer with Reed should be done on towl or at least paper towl . Check and look at the spacer and reed to see if there are any gaps between the metal reed and Spacer . If there is no gap and seating proper aginst the spacer then it is fine . 3 If there is any space between the reed and spacer then you will have to remove the reed from the spacer . 4. You should see a ring mark on the out side of the reed . 5. Inspect the spacer carefully . If see a line between the screw holes and the inlet that is where the problem is , 6, Used ether 1000 to 2000 grit sand paper laying flat on a super flat area . Counter top or glass . You want to sand that side until the line is gone . Make dam sure you sand on a perfectly flat serface , I also sand the other side of the black spacer 7. Reassemble .

@josephpostma1787 Ай бұрын

Well dang, that exhaust allen bolt stripped out.

@billylusk3515 Ай бұрын

Fixing to do that, really needed to watch this, thanks

@chrisphillips1114 Ай бұрын

300/day! Yeah, I'd dig it too!

@saveapossum7195 Ай бұрын

Beautiful, great vid thanks.

@walterschilling4512 Ай бұрын

Hi Tim, I picked up a z-foce 48 with a blown engine, and replced it with a new engine, had to replace 1 spindle and the two front tires, I have that problem with the PTO, all my deck spindles move freely , It may be some saftey switch, not worried for now, I will find the problem , I also have a Cub 54 in...I liked how you trouble shoot by removing the belt on the PTO and go from there. Fine mentor you are with the kid, teaching him hands on mechnicial is what we need more of in our country..

@tabathakleinstein664 Ай бұрын

What a bad, bad, man!

@djbadandy1 Ай бұрын

you wanted to not put the "thing" in there. easier to seat a bead with the schrader valve core out.

@psbc1 Ай бұрын

Do have the part numbers? Thanks

@berad187 Ай бұрын

$95 ?? Woow I guess I got lucky with the Ford dealership I go to are pretty cool with me to check out my car's for a cheap price to have it looked at before getting serviced on but I guess I should be Greatful for where I go to

@staciheflin4634 Ай бұрын

Unfortunately I am attempting to fix this myself at 62 I I need assistance with instructions

@staciheflin4634 Ай бұрын

The end of spicket does not have a threaded end. It has a copper fitting that goes over the main copper line coming from house how do I connect the two copper pipes securely??

@staciheflin4634 Ай бұрын

What if the water line coming out from underneath the home is copper! How do I attach the farm spicket to the copper

@racerxonthe8th Ай бұрын

Good job, man. A lot of people would have tapped out way earlier. Hope it last you a long, long time.

@akathecops Ай бұрын

Drugs are bad. Everyone say it. Drugs are bad.

@tmb9126 Ай бұрын

This is nice and thank you for sharing, but why does everyone put things like this right up against the fence? Why not closer to the house away from the neighbors? It seems so inconsiderate. I see people doing this all the time with chicken coops, shops, dogs. It just makes no sense to me.

@anthonychen2368 Ай бұрын

See the tree not see the forest

@davetincher5141 Ай бұрын

I have used mine a lot and it does fine. The more you use it the more you will learn the little tricks and short cuts...

@pedrobisono747 Ай бұрын

only critic i have is that you should figure a way to deal with cord but i like that plan do something similar

@Waray25 Ай бұрын

I don't clean carburetor wasting my time, I just replaced it 18$ new carburetor adjusted from manufacturer runs perfectly.

@FM-qh1hb Ай бұрын

Quick Question! First thanks for posting and great video! Is there a way to know all the flex duct sizes needed or should we measure all diameters first and then go buy the right sizes? Appreciate it!

@CVMGAM 2 ай бұрын

I would look into glasses before your next project. Just a thought.

@ASliceofWoodWorkshop 2 ай бұрын

Can't get better than 20/20

@hyretech 2 ай бұрын

The 30 bin parts rack is now $22.99 in July 2024. Part #63151

@lhogie1962 2 ай бұрын

Sorry it’s a BIG FAT NO …fail results

@marklee8484 2 ай бұрын

Thank you!!

@AngelLopez-gn6tz 2 ай бұрын

Thanks I have the same problem and and going to try the swap. Which weed eater did you use as parts. I’ve got a few, you’ll save me the time taking some apart. I looked through exhaust port and low behold the piston is scored badly. Want to swap the head assembly. Once again thanks

@AngelLopez-gn6tz 2 ай бұрын

Were all the donated parts newer craftsman weed eater??