Where would the other end of the rinse line connect to? Replacing the line that a rat chewed
@T31-i2pАй бұрын
Good job explaining it all, helped a lot - thanks!
@elainedonnelly13923 ай бұрын
What brand of mineral stick do you recommend?
@justforfunaviation63423 ай бұрын
Nice video, just subscribed
@vernussturgill62234 ай бұрын
Would having the hose reversed onto the valve cause this problem?
@eugene35604 ай бұрын
Didn't use my pump for a while the property was sitting vacant. Went to use the pump, and it just hummed. There in a hole in the cover that I was able to check that the motor was free. Gave the power again and tried to help the motor spin, but it was still just a hum. With a primed pump, put a battery-powered drill to give it a little more help. A small puff of oily smoke, and we are back in business. Great video
@kg4boj5 ай бұрын
What if you just put a ball valve on the waste line
@xelasmada165 ай бұрын
I was hoping this would work, but sadly for me, it didn't...New capacitor, but it still hums and doesn't start. Impeller and motor turn by hand, but it doesn't fire up.
@railroadsgarage92423 ай бұрын
What was the issue?
@rnvaneck5 ай бұрын
OUTSTANDING video--one of the best I've seen. You have everything set up, all the right tools, a good cameraperson, and you walk us through the whole troubleshooting process step-by-step. Language and explanations are pitched exactly right--not too high level, nothing skipped, nothing extraneous. Fantastic!
@iannickbannon9925 ай бұрын
Thank you very much! Well done! Very clear explanations.
@DennisPalmer-h6r8 ай бұрын
I agree, this video was fantastic! Excellent presentation!! Thank you!
@gillsandthrillsllc8 ай бұрын
What happens if the cold light stays on, but you are trying to have it heat up with no increase in temperature?
@lounsburyhomeschool12059 ай бұрын
My spa is similar but not the same brand. How high should the water level be in that skimmer pocket? I think my hot tub is leaking but I’m wondering if it’s just the guests pushing up the water line when they get in. It’s also winter so maybe it’s evaporation. I fill the water halfway up the skimmer and then a few days later it’s down to about an inch or two above the skimmer. Any advice would be appreciated.
@krossberpools40739 ай бұрын
Thank you for checking out our video! The water level should typically be at least halfway up the skimmer area of the spa. It sounds like it could be either displacement from the guests or evaporation. Your on the right track. Another great idea would be to open the access panel of your spa and take a look inside the equipment area of the spa to see if anything is leaking or if there's any water in that area. I hope this reply helped! :)
@fadi2c11 ай бұрын
I really enjoyed your leaking pump video very helpful in many ways, and excellent clarity and presentation!
@donhorvat1931 Жыл бұрын
Thank you. Motor (~$600), the capacitor was $14 and available locally. (5 minutes 2 screws)
@kthompso43 Жыл бұрын
I love "How To" videos like yours. It makes my DIY approach to fixing things much easier. And, YES, if you lived in my neighborhood, I would not hesitate to call you for spa service I could not do myself.
@laurenciekhamphanh8993 Жыл бұрын
Can you please provide links to the products used to clean?
@ArlynLanz Жыл бұрын
Hi, the silicon is to lubricate ir to glue? Thank you
@KarenBolton-u5o Жыл бұрын
Which side of the spider gasket goes down? The flat side or the ribbed side? We keep hearing conflicting answers 😊
@Elblanco463 Жыл бұрын
Question, do you have to discharge your new capacitor before you install it??
@grantwes Жыл бұрын
Thank you. I have a Pump Seal leak. How does one find the correct “Pump Seal”
@andredickson7665 Жыл бұрын
Exceptional instruction- just saved me a service call. Thank you.
@denisecarroll5151 Жыл бұрын
Hi! How do I figure out which Freeflow model we have? Recently purchased a home with a Freeflow spa. Thanks!
@krossberpools4073 Жыл бұрын
Fee free to email pics of your Freeflow Spa to [email protected] and I will identify what model you have 🙂
@chriscecchini Жыл бұрын
My valve is leaking out of the waste port while on filtration. Fresh install, works on recirculate without leaking.
@GerbenNZ Жыл бұрын
I have that exact pump and need to change the wet end. It has been leaking through the shaft seal for a while now and it is thoroughly corroded. For the life of me I can't get the impeller to budge. Any advice for removing tenaciously stuck impellers?
@samudin4077 Жыл бұрын
Send me your number
@jaimecazares1258 Жыл бұрын
This was a super informative video. Love seeing well put together videos that are simple for guys who kno NOTHING of this world! Thank you
@darrealemerick8685 Жыл бұрын
What if you order a brand new doheny multi valve and it still does it?
Thanks and it reminded me of another question I had. My hot tub is on a cement patio under my deck. It has a slight pitch to it, not huge but slightly so the side with the controls are lower than the back of the spa. Should I try and get it level or not worry about it and if I do try and level it what is the best way to do that? Sorry I promise no more spa question at least not today!
@krossberpools4073 Жыл бұрын
My pleasure Brad. No worries on the questions I am happy to help. Unfortunately the only way to level the spa would be to remove it and level the pad itself. You don't want to shim the spa as it can create stress and lead to issues. My pad is pitched too. As long as water runs into the filter properly you are all set.
@KBradAdams Жыл бұрын
@@krossberpools4073 Thanks the person who delivered it said it was fine... and I was wondering about shims... so thanks.. I will leave it as it is and thanks again for the reply!
@KBradAdams Жыл бұрын
Good video! Can you show us how to drain the ice or cooler feature on that model? Mine seems to hold water almost like the drain in the cooler area is higher than the rest so water does not drain out.
@krossberpools4073 Жыл бұрын
Here you go Brad! kzbin.info/www/bejne/gYang3mGmbxjaNk Thanks for subscribing!
@lystrabridglal8387 Жыл бұрын
Hi what causes the clear small glass container on the multi port valve to remain empty when the old system is changed
@StartVisit2 жыл бұрын
$20 on ebay
@terryholloway99302 жыл бұрын
How do you keep from a over chemical leak that ruins a pump thanks I don’t want to ruin another pump and motor
@ynotstand2 жыл бұрын
Thank you You are clear thorough and to the point
@tlc83862 жыл бұрын
do you know how to do a century four wire --can't find any info on it anywhere--
@nancylWi41752 жыл бұрын
Great instructions and to the point! Not a bunch of stupid talking! Great job!
@jimgalloway32072 жыл бұрын
really good video thanx
@tstaples92 жыл бұрын
Wow great video! I took my faceplate off and found that there actually was a crack on the inner part of that faceplate but I have no idea how it got there (I have pics) but it is pretty obvious I have been over chlorinating my spa for about a year. All the black plastic inner parts are bleached white. My question is can I send that down a bit and epoxy it to fix the crack? Will the chlorinated water break down the epoxy? I think the stop and start of the crack can be sealed but love to hear your opinion!
@retiredelevman2 жыл бұрын
Wow , this was the first video that I’ve watched that mentioned the capacitor holding a charge and how to discharge it. Some videos didn’t even mention turning off the power before poking around inside the motor. I’m glad that you’re on the ball.
@tobymiller23402 жыл бұрын
How often should you replace the shaft seal?
@lindamollicone86452 жыл бұрын
Hi I put on a new key grip on my Haywood filter and when I put it on filter water comes out of the backwash hose too. Did I need to seal it with something and buy that sealing ring too. I didn’t do that. Thanks
@buckallen382 жыл бұрын
Linda , I had the exact same problem , I installed a brand new key and it still leaked out of the backwash . I resolved by putting a threaded plug in the backwash line . Filter works perfectly now.
@la5150hi-lophoto2 жыл бұрын
Excellent tutorial and saving me hundreds of dollars!
@raycontreras162 жыл бұрын
My hot tub is saying 90 degrees. But it’s only 70
@Theundisputedtruth10 ай бұрын
Sounds like a thermostat sad we have to ask common questions to professional and can't get a exact answer when they say u can't answer a question simple and fast they don't knkw whag they talking about it I hope that helps but experience with hvac sounds like thermostat issues hope I could help
@tman19422 жыл бұрын
EXCELLENT! I WISH I HAD VIEWEDTHIS BEFORE I STARTED!
@swedishkev2 жыл бұрын
Hi there, I have an almost identical-looking balboa system, the element looks exactly the same. The other day we had the electricity go off 3 times in 3 days, turns out an electrical lead laying in water. Now I have discovered that the hot tub heating was going down from 31 to 20 degrees where it has stayed. here in Sweden, it is 3 plus degrees at moment. I have checked all fuses and the main one on the top left. All ok. They should all be on 0 reading. The big fuse was 0,001. When l checked it .I checked the heating element with the multimeter, with electricity on, the reading was 0, not 220-240v. The Pump is running normally by the way. I do not know what has happened but my suspicion is that when the electricity went off 3 times in 3 days, the other day,it has caused something to happen. Why would this cause the element to stop working? Do I need new element ,? The relays don't look burnt. No-fault codes on the top screen, all look normal.Can not see that by just buying just new element,is the problem here.
@trevordoeshalloween59942 жыл бұрын
Check element on continuity mode and if it beeps then element is probably good, so the board is probably bad
@swedishkev2 жыл бұрын
@@trevordoeshalloween5994 Hi there, It was not the element, but must be the relay, Is it just one relay for the heating element ?
@trevordoeshalloween59942 жыл бұрын
@@swedishkev It depends on your board, if there's a place near you that repairs computer boards you could try them, or just buy another board
@Timmywahoo2 жыл бұрын
Do not over look the backside your controller board, its a pain, but one burnt relay solder post could affect the overall operations. Resolder, re install and then retest the heater.
@360Toursofnova2 жыл бұрын
I replace the top part of the pump - but it's leaking like crazy now ... can you look at this quick video and make a suggestion? Also i have 2 pumps on this hot tub. Can i just cap off the 2 water leads when i remove this pump and just run it with one pump for a while. I want to make sure the heater is working (use tub from craigslist) but can't get pass this problem ... :( - my video - kzbin.info/www/bejne/gXuqqXuFi7OHgdk do you have a o ring or gaskit for a jacuzzi 350 - pump 6500-261
@coenraadjoubert-strauss82612 жыл бұрын
Thank you. This was very helpful 👍👍
@dankelly22513 жыл бұрын
Great video & even better person thanks my friend much appreciated !