As I understand it, the central console was simply painted? Without film? What kind of paint? Was varnish applied to the paint?

hey do you have thr link for the link for the bracket

I have 2004 clk 500 230,000 miles I’ve changed just about everything you said control arms was my biggest pain warped rotors also 😂😂my top leaks but I’ve seen a couple hard top water proofer and headlights are close to $100 basically you can do your own work I love it

Maybe does not have any movement in the latch at all like no power is going to it. I was thinking it might be the micro switch.

Kfi😅vlvkkfk❤

im gonna buy a 2006 clk 200 manual. how much is the average cost to own per year for this model? does it need repairs often? any expensive repairs? what should i look and ask for when buying it? its my first car

I would add that if you are considering a CLK350 with the m272 engine, that you check the engine number against the list of engines that could have balance shaft issues.

Does it fit CLK 500 o6

Why don't you turn the music up a little bit

How do you get the sensor to break loose? I can’t get it loose even with a pull handle.

I have one and first of all mine runs like a bat outa hell.and yes these cars need up keep just like anything else..but no more than anything else. If you don't want to work on it perhaps a used car isn't your cup of tea. Go buy a new one.and you will have warrantee.

is it a good idea to buy one with low milage 30-40k max?

I'm going to offer here that the single most important thing to do when buying a used Mercedes...ANY used Mercedes...is to make every effort to learn exactly how the car was serviced over its life time. The first step is to order a Carfax report which is the beginning and the second step is to speak with the service department at a Mercedes Benz dealership. Many of these cars are owned by two or three people over their lifetimes and often at least the first two owners have had their cars serviced by authorized Mercedes dealers and especially so the first owner. That is a car to begin the search for. Hard to find? Yes and no. The car will probably not be in your town, city or even state, but good used Mercedes that have been serviced well throughout it's lifetime ARE out there and not awfully expensive.

hi the key broke off while trying to open it. Any advice?

Is there a button in glove compartment for benz e550 convertible

I need test my keyless Go system,.. I have start button on shifter but it says doesnt recognize key and the doors dont unlock with handle or when I approach car but key works normally and I can unlock with key fob and open trunk with key fob.. just none of the fun stuff lol 05 CLK320 Sport convertible A209 version

I am about to do this rn... I really like how you formatted the video and circled where I need to look! I appreciate you

Another good one

After watching this im little scared to buy one

Yeah this channel suck along with the stupid loud music. Stop trying to be hip and show properly how to change stuff.

Brilliant video. Thanks for mentioning it a few days ago.

So one question, high beam and dipped beam are both H7?

Nice points. Ive just bought a clk 220 and the air con is semding out that dusty moykd smell you get in a wet damp room in a house that house mould. Any tips on getting rid of this. Giben you a follow 😊

Can’t really hear the roars over the music:(

I am wondering if I should get a 20 year old car for hobby, for about 3000miles a year,. I love this car, the look etc and was lookign for a clk 240 or 320, don't need more power. But I wonder what the maintenance will cost if you don't know or cant do it yourself. I mean I really don't want to spend 2-3k a year for such low usage.

I have a2009 CLK550 can Ichange all the bulbs to LED?

Life saver

Great video. Definitely took longer than 1-2 hours but I had a different issue as well. All the gears and motor were intact. The axle was slight bent. I straightened it, slightly sanded it, but the main issue was the arm that slides up and back was hitting a part of the metal that the arm channels over and it was hitting that getting it stuck. So I filed that down and reassembled. Took a few times to get the wire harness configured back just right or it wouldn’t open and close properly again. Thank you!

Great & informative! I found the Foxwell NT530 but you recommend foxwell N530 elite. Same product?

thanks man

my car is SLK200 manufactured in 2008, so should I use 1156 or py21w?

Scary 😮

Is it the same for a 2.0 ford fusion

Adam, I just need the same circle metal adapter. Could you please share the link?

Very useful video…thanks. Did u have to remove the fan/radiator to access the belt? I don’t seem to have as much room to work as u do in the video.

I have a 2019 Fusion and the passenger seat works fine both heated and cooled. The drivers side doesn’t work. The status lights turn on but nothing happens on either hearing or cooling. Could this be the problem? Do you work on these or know someone who does in Southern California?

Question im about to buy a CLK that intermittently doesnt start first attempt. Possibly an immobilizer issue. Any one got an idea as to what it might be ?

Great video

Thanks for the video!! Wow.. $60 bucks for a $5 harness. Crazy

How did you get the gears lined up at the end? Is the black piece supposed to go all the way back sticking up when it’s closed or somehow catch at the end?

This looks Amazing, i want to do it myself too. But how much wrap should i order?

I have 17 titanium. I replaced one O2 sensor for code P0420, but I don’t know where the second upstream O2 sensor is…

I have a 2009 Mercedes CLK 350 convertible. The driver's side door electricity goes off and on. I never know when it will happen. Is it most likely a pinched main wire? Or can it be a larger issue? I also have a bouncing electric lock, but I have stuffed two small plastic tightening strips around the bouncing lock at the top of the door and the lock stopped bouncing. Sometimes I turn my ignition key over and nothing happens but all lights some on. I quickly reset the key to the beginning start position and turn the key, it starts right up. Is this an electrical issue?

Had a steady check engine light come on. Dealer said purge valve or O2 sensor ? I have a 2020 fusion titanium I noted I left it running when I pumped gas it starts shaking and idling rough like it’s going to stall could it just be an O2 sensor just wondering thanks in advance.

thank you! your like the only one on youtube doing the A8 d3 model maintenance and you have already taught me so much in 2 videos

mine don’t make any noise at all but the car to dead to start is that why it won’t open because it’s to dead everything els work except the automatic window blinds

I’m my case it won’t stay close 😭

I just acquired a 2010 Audi A8L 4.2 and I was looking for some basic maintenance videos on similar models so running into your channel it’s great! I also watched your oil change video as well… thank you for sharing your knowledge!

I have 2019 Ford fusion Energi titanium I got P013a code. Is it the same?

Thanks for this im getting a clk on Saturday i was worried about not having xenons this seems pretty good il order the adapters. How good are these compared to your audi hid's?