Do you think an enterprising user with the ability to machine new gears could convert this to a chain drive or helical gear drive, and modify the ratio?
@lawnmowerjones3160Күн бұрын
Hi, I think it would always be better to have new gears made , like for like, if the old ones are badly warn. Ransomes would have spent a lot of time getting the gear ratios correct, so changing the gears for something different would probably only spoil it. Thanks for your comment.
@ellenorbjornsdottir11665 күн бұрын
I had to turn the volume up to 250%, then down to 200% Bet it beats a motor mower. Less pollution, maybe less noise pollution (though yours is quite noisy!), no having to pull the engine to give it a crank (easier if you're strong but can't extend your arm very far). Many reel-type mowers are being made for the North American market nowadays, in widths from 14 to 20 inches (in proper money, 355.6 mm to 508 mm) as well as even wider, but I bet they're a poor imitation of this, and they use wheels rather than a roller for the drive. I intend to use such a poor imitation mower to scalp (!) my lawn so that plants I actually want can grow in its place. You never mentioned using an old fashioned scythe to crop the oversized grass! That said, I doubt such a thing would work very well, as I've tried it. It's better for whacking weeds that occur in open spaces.
@lawnmowerjones3160Күн бұрын
Hello again. Yes i do need to get my microphones charged as out door filming does vary . Ransomes do have a contact cutting cylinder, so some noise will be made, ( Rather nice sound though ) If you have a small piece of lawn, and is flat and not to long, a hand mower is probably green as you are going to get. Something well made would last you years, so got to be good for the environment. In the uk these days new hand mowers are mainly 12" / 14" cut as you say in America you do much larger sizes. The old Fashioned Scythe , that's a skill and another topic. Thanks again for your comment.
@KATHYMEADful13 күн бұрын
Thank you for showing us your progress, Both mowers look amazing👍
@lawnmowerjones316012 күн бұрын
Hi Frank, Thanks slowly getting there , but sadly i have not been as busy is i would like, work has been very hectic. Thanks for your comment.
@jonson48113 күн бұрын
Regarding the date, I think 1975 is certainly very close. I have a similar '72 brochure (not accessible right now) but from memory everything looks about the same. I believe that by the later 70's the plastic air filter was being used. I have a 12" model that was purchased many years ago from the original owner who said he bought it in 1976. That looks identical to the brochure other than it had a plastic air filter.
@jonson48113 күн бұрын
I forgot to say, I also have a 14" model from what I'm guessing is about 1970ish. It had the metal air cleaner and also the earlier alloy recoil unit. So I'd guess that would be one of the early alloy sided 'super' models?
@lawnmowerjones316013 күн бұрын
Yes, I suppose if you were a real fashion expert it would be quite easy to put a date on the catalog, but I am glad you have come up with a more accurate date. I do have an 80s Qualcast / Suffolk parts catalog which have some dates. It would be interesting to see your Qualcast / Suffolk brochure when you find it. The earlier cast Suffolk recoils were much better than those newer White / Black plastic ones. Thanks for your comment.
@eyesaidthat210917 күн бұрын
Awesome! It sounds as if the blades are too tight to the breadknife?
@lawnmowerjones316017 күн бұрын
Yes the Ajax is an Awesome mower. If it had been sharpened i could have backed it off a little, but wasn't to hard to push. Thanks for your comment.
@tortron21 күн бұрын
What a lovely wee machine. The grass box is very cute. But 8"! And those low handles!
@lawnmowerjones316020 күн бұрын
Hi, yes it could be an ornament , it does look like a Childs toy mower , but is the real thing. Back then , i guess people were a little shorter. Thanks for your comment.
@KensSmallEngineRepair25 күн бұрын
I never see Suffolk mowers here in New England USA but would love to try one! Great video!
@lawnmowerjones316025 күн бұрын
Hi Ken, i can't help feeling there is one in New England just waiting for you! Yes great mower and nice to use. Thanks for your comment.
@tortron26 күн бұрын
Being in the colonies, we got all the export stuff as you might imagine. My Morris minor has a dusty road oil bath air filter rather than the steel mesh that the UK got for example. Generally stuff like exhausts and air filters I find to be different on many small engines. But it extends to Japanese imports as well, my mitsubishi ute has different steel pressings in the tray. And sometimes the paint and interior of things are local market specific. All because of import tariffs, a certain percentage of things had to be made local to avoid large taxes on imported goods. Also why things were imported as CKD complete knock down kits to assemble here. Keep the locals working
@lawnmowerjones316026 күн бұрын
Hi. Yes as you say the colonies must have had quite a lot , and probably cars more than anything. As a manufacture Export must have been a very important part your business. Some of the differences must have been made for local conditions and needs, like your Morris minors air filter needed to be an oil bath to cope your conditions. Thanks for your comment.
@krowbar23Ай бұрын
Come mow my 2500 acres with that I sure like it. 😅😅😅
@lawnmowerjones3160Ай бұрын
Ha, Ha , i think my Suffolk corporation will be knackered by the time i have done that, and me to!!! Thanks for your comment.
@themowermanАй бұрын
Lovely mower mate .. sounds the business
@lawnmowerjones3160Ай бұрын
Thanks Mick It has been a very busy couple of weeks, so little done in the garage. Was a good day for cutting grass and stones!!! Thanks for your comment.
@tortronАй бұрын
Thats a nice compact design. Maybe a mic for next time, the far shots were a bit quiet
@lawnmowerjones3160Ай бұрын
Hi Thanks. Sadly the microphone battery died early on in the filming. I will have to be more prepared next time. Thanks for your comment.
@shanesquire1Ай бұрын
SOUNDS NICE . I HAVE A SUFFOLK SQUIRE LAWNMOWER LIKE YOURS.👍
@lawnmowerjones3160Ай бұрын
Hi, yes I have seen your early Suffolk Squire and it’s also a runner! Very underrated mowers really. Thanks for your comment.
@tortronАй бұрын
Oh wow i want to go. I think the closest here is the vintage machinery club that occasionally get the mowers out
@lawnmowerjones3160Ай бұрын
Hi , Yes we have quite a lot of mowers to see at the Old Lawnmower club rally , and grass to try them on! Not long now till the 2024 Rally. Thanks for your comment.
@user-mt8cn3fk2vАй бұрын
That machine is proof things were made to work well and last. I must say the price of a McDonald's breakfast is a reasonable price for a great camera lady. Great video.
@lawnmowerjones3160Ай бұрын
Hi David. Yes things were made to last years ago. Funny we are supposed to be in a environmentally culture , but we are building things cheaply and dumping them sooner! We must keep the camera lady happy, she is worth every penny / McDonalds. Thanks for your comment.
@henrymurawskibigdogrepairАй бұрын
We used to have them kind of Mowers here in the states, but I don’t see them here anymore. Gotta get me a camera lady.
@lawnmowerjones3160Ай бұрын
Yes it is mainly Rotary mowers these days. For a proper cut it has to be a cylinder mower ! or as i think you call them Reel mowers. Yes everyone needs a camera Lady, just need to treat her to a Mac Donalds! Thanks for your comment.
@themowermanАй бұрын
Nice mower.. think I have one of these somewhere.. got mine off this lovely gent.. for the life of me I can't remember his name.....
@lawnmowerjones3160Ай бұрын
Yes I knew you ha fine taste in quality machinery. I think I know the Chap you are talking about, I don’t think he is a Gent though. Thanks for your comment.
@henrymurawskibigdogrepairАй бұрын
It’s tough getting old
@lawnmowerjones3160Ай бұрын
@@henrymurawskibigdogrepair Yes it's coming my way!
@silverdicerАй бұрын
Cracking mower, they certainly built them to last! Thank you for sharing your day with us, and to the camera lady for filming it..hope she enjoyed the Mcdonalds lol
@lawnmowerjones3160Ай бұрын
Hi, Thank you, a well made mower as you say, little plastic and made to last. Yes the camera lady enjoyed her McDonalds so i didn't get done for beach of contract! Thanks for your comment.
@user-mt8cn3fk2vАй бұрын
Hello I just subscribed after mick the mower man said you had a great channel.
@lawnmowerjones3160Ай бұрын
Hi , thanks , good old Mick.
@EAB1771Ай бұрын
Amazing stuff!
@lawnmowerjones3160Ай бұрын
Thank you. We had a great day and the weather held! Thanks for your comment.
@ianrobinson5446Ай бұрын
Can't hear you very well.
@lawnmowerjones3160Ай бұрын
Hi Ian, it was quite windy outside my unit, hopefully it was a little better inside. I must get my microphone out next time. Thanks for your comment.
@lawnmowerjones3160Ай бұрын
Thanks, got the Mug to go with it !
@themowermanАй бұрын
Nice hoodie....
@Herbybandit2 ай бұрын
That looked quite the struggle, a job for an octopus! If you need to do that again you might find it easier to drill all the holes in the steel first then put in the first four screws to get it all lined up then wrap a ratchet strap round the belly of the beast to draw it all in.
@lawnmowerjones31602 ай бұрын
Hi , Yes i do like a struggle, another pair of hands would have been good. Onto the Suffolk box next. Thanks for your comment.
@silverdicer2 ай бұрын
Wonderful video, thank you for sharing 👍
@lawnmowerjones31602 ай бұрын
Thank you, glad you enjoyed it, was quite a bit of work but i think it was worth it. Thanks for your comment.
@mr1pearl2 ай бұрын
Fine bit of fabricating looks like it is coming along well ! Keep us posted would like to see how that works out .
@lawnmowerjones31602 ай бұрын
Hi Bill, Thanks, Everyone loves a Hammer job! I will try and get it finished for the next video. Thanks for your comment.
@themowerman2 ай бұрын
Good effort.. its a lot of hard work.. and thr rewards will show in the end.. hope all is good
@lawnmowerjones31602 ай бұрын
Hi Mick, Thanks, hopefully it will fit!!! All good thanks, have to catch up when the weather is better. Thanks for your comment.
@KATHYMEADful2 ай бұрын
That really is a good looking mower, Thanks for posting 👍
@lawnmowerjones31602 ай бұрын
Hi, Thanks , yes worth the effort ,the box will really finish it off. Thanks for your comment.
@hemmingsadventures3 ай бұрын
Thanks for a facinating video. I'm searching for a Qualcast powered panther grass box or a nice transfer like your one. Is there someone who makes old transfers?
@lawnmowerjones31603 ай бұрын
Hi . it was a pleasure and glad you enjoyed it. If you after a Qualcast powered panther grassbox, probably well worth joining the Old Lawnmower Club and you could put a wanted in the classified section. They also have a very good club shop, which also does Transfers, and where i got my Suffolk Punch one from. Thanks for the comment.
@stonethemows3 ай бұрын
Don't be apologetic about the Dronsfield grassbox. It is a bonus having one at all for this machine and any of that age certainly won't look any better. I'm still hoping that we may be able to come up with a transfer for the MIP but as you will appreciate it's quite a complex design and unique to that machine.
@lawnmowerjones31603 ай бұрын
Good evening. Vey kind words , i have got to be happy i have a box at all. No rush for the Greens MIP transfer, but something to look forward to. Thanks for your comment.
@tommcg6664 ай бұрын
Congradulations on 400 subs, nice job.
@lawnmowerjones31604 ай бұрын
Hi Tom, Thank you, only started as a bit of fun, but spurred me on to do more! Thanks for your comment.
@matthewhibbs96024 ай бұрын
Well done. Cuts better than most modern mowers. 😀
@lawnmowerjones31604 ай бұрын
Hi Matthew, thanks, just got to keep away from those stones! Thanks for your comment.
@themowerman4 ай бұрын
Well mate .. what a cracking little mower... You did a fantastic job
@lawnmowerjones31604 ай бұрын
Thank you for the kind words, as you say a cracking little mower, and probably still going when i am in a wooden Box! Thanks for the comment.
@KATHYMEADful4 ай бұрын
Well that little mower turned out lovely, Truely a credit to you, Thanks for posting👍
@lawnmowerjones31604 ай бұрын
Hi, Thanks it is a lovely quality mower, i learnt a lot on that one ! I have just got to do the grass box now. Thanks for your comment.
@mr1pearl4 ай бұрын
Well done sir lucky you can find grass ours is a foot under snow !!!
@lawnmowerjones31604 ай бұрын
Hi, Thank you. It was a nice afternoon for a change, we have had a lot of rain here recently , A foot of snow, makes me shiver thinking about it! Thanks for your comment.
@Herbybandit4 ай бұрын
Nice job, well done. Humbrol enamel is good paint for picking out lettering, covers well and dries considerably faster than most other paint.
@lawnmowerjones31604 ай бұрын
Thanks, Its nice you can still get it. Like you say it does dry quickly. Thanks for your comment.
@Herbybandit4 ай бұрын
Coming along nicely.
@lawnmowerjones31604 ай бұрын
Hi Herby, Thanks , i just need that box sorted next. It will be an opportunity to get the Big hammer out!! Thanks for your comment.
@themowerman4 ай бұрын
What a great looking mower... Not something you see every day...
@lawnmowerjones31604 ай бұрын
Hi Mick, yes a bit unusual, just need to get some dry weather , and get a bit of testing in! Thanks for your comment.
@donjohnson37014 ай бұрын
A righteous New Year from across the pond!
@lawnmowerjones31604 ай бұрын
Hi , Thank you likewise. Thanks for your comment.
@KATHYMEADful5 ай бұрын
Time well spent, It's looking really good thanks for sharing, Happy Christmas to you and the camera lady.
@lawnmowerjones31605 ай бұрын
Hi , Thanks, i have enjoyed doing it and think it is a mower well worth doing. And hope you also have a great Christmas. Thanks for your comment.
@freesubscriberschannel99035 ай бұрын
demo pls
@lawnmowerjones31605 ай бұрын
Hi , Yes it will need to be tested on grass, it can't be show and no go! Thanks for your comment.
@Herbybandit5 ай бұрын
Looking nice, have a great Christmas.
@lawnmowerjones31605 ай бұрын
Thank you. Likewise have a great Christmas.
@lawnmowerjones31605 ай бұрын
Thank you, I should be painting boats, not mowers!
@themowerman5 ай бұрын
Great video mate ... Looks good
@robincoleman60985 ай бұрын
brilliant bit of kit.Maybe you could do some more chainsaws at some time.
@lawnmowerjones31605 ай бұрын
Hi Robin. Yes, built when things were made to last. I have used it a long time ago, it doesn't rev like the modern saws, it is governed but loads of torque. Yes if i see any more will do a video. Thanks for your comment.
@robincoleman60985 ай бұрын
the good old mc cullock pro mac was a good model to.Some of those stihl models could be converted to hedge cutters but very heavy to use.@@lawnmowerjones3160
@robincoleman60985 ай бұрын
@@lawnmowerjones3160 i have just purchases a sthil 010av and need a new chain sprocket any ideas '
@lawnmowerjones31605 ай бұрын
Hi Robin. yes i have worked on a few of those 010AVs in the passed. Sadly quite a lot of the parts are now no longer available through Stihl, but quite likely some one will have on the shelf, old stock. According to the Parts diagram it should be a 3/8 and 7 tooth ( 1120-640-2005 ) I would probably say Ebay, but i am pretty sure Oregon used to do one, If yours is the 3/8 and 7 toothed ? you can probably use that Stihl Part number to cross reference . Good Luck.@@robincoleman6098
@robincoleman60984 ай бұрын
@@lawnmowerjones3160 thankyou iIwill have a look around i may have a look to see if any olc members collect chainsaws or have repair buisneses.I did think of trying to fill the groves in it .
@themowerman5 ай бұрын
What a professional you are.. great work mate
@lawnmowerjones31605 ай бұрын
Thanks, but sadly no pay day at the end of this job! Have to catch up some time. Thanks Richard.
@themowerman5 ай бұрын
@@lawnmowerjones3160 yeah mate .. sounds good
@mr1pearl6 ай бұрын
Its a bit of a monster isn't it got a good giggle when you put that piston in the bigger cylinder 😆
@lawnmowerjones31606 ай бұрын
Good evening. Yes, probably best to call it Sir, given the chance it would make mince meet of me! Little piston in Big cylinder. Yes we need a bit of silliness , yes it does make you think though. Thanks for your comment.
@Londonfogey6 ай бұрын
Excellent video. I have seen one of these for £49 on Ebay but the front wooden roller appears to be partially missing, only the two outer rollers are there. Would it run ok like this?
@lawnmowerjones31606 ай бұрын
Hi, Well if it has a grass box , and the rest is in good order. It would be well worth £49. The wooden front rollers are nothing really to worry about, you can use it with just the outer. Or find someone with a lathe and would be an easy job to turn a set up. Enjoy your Ajax. Thanks for your comment.
@Londonfogey5 ай бұрын
@@lawnmowerjones3160 Thanks - have actually now found a completely intact one for £25 - so I've snapped that one up instead!
@lawnmowerjones31605 ай бұрын
Well £25 for a complete mower, doesn't come better than that! Well done enjoy!@@Londonfogey
@lawnmowerjones31606 ай бұрын
Hi, yes not really seen many, the 070 seems a bit more common Stihl have made some really powerful saws over the time. I think a lot as you say were used on Farms . I have used it a long time ago on a large Oak butt and did find it very hard to get a straight cut, the 36” bar seemed to wander a bit. I think these days I would be a bit more nervous using any chain saw without a chain brake. Thanks for your comment.
@Herbybandit6 ай бұрын
That is a monster and somewhat rare in this country! I had the pleasure of running an 045 AV while still on the farm and that was heavy. I'd hate to have to use an 090 for any length of time. It'd be fun just for the experience, have you put it into the wood yet?
@suburbancyclist.31836 ай бұрын
I have sensation riding mower . Any idea of the value?
@lawnmowerjones31606 ай бұрын
Hi, Sorry not seen one of those, i am guessing it is an American machine. Probably worth contacting the Vintage Horticultural and garden machinery club. They are very into tractor type garden machinery and have a good website. Thanks for your comment.