Thank you! 🙂

Thank you! I'm glad the video helped out. 🙂

It would depend on whether or not the flat ribbon cable was damaged. Is this the piece that you are talking about? kzbin.info/www/bejne/r3ulpIGljduqrLs

The zif holder sir I tear a little because at first I don't know how to remove the ribbon to the zif holder that has clamp so the white is teared instead of the black color clamp

When I bring back the old LCD of my cannon it didn't work, I thought the new LCD is the problem

But the power button is still working

@@Stian_2023 If the cable is torn, even just partially, then it will need to be replaced. Except in a few cases, it's almost impossible to repair a torn cable. I would suggest looking for a broken A4000 on eBay, and then use that same cable from it to replace the torn cable. The power button may still work if the cable is only partially torn. Sorry I can't be more help.

I destroy a little/a bit of the zif connector the upper light color that holds the ribbon

Thank you. I'm glad that the video helped you out. 🙂

Thank you! I'm glad the videos have helped out. 🙂

Hi Shawn. I have not summited Elephant peak, but I have talked to many that have. One problem that I've heard with the Rock lake / Libby lakes route, is that there is one location where ropes are needed. It did prevent one group of hikers a couple years ago from reaching the top because of that. I haven't heard of anyone going from St Paul lake to the top of Elephant peak, but a friend of mine did go the other way, from the peak to St. Paul lake. It didn't sound like he had any problems, other then with a lot of brush. A route that I think would be worth checking into though, and I have had a friend who did go this route, is from the Libby creek drainage side. I've been up that way in the drainage many times, and always look at that route. To me, it seems like a good way to go, and if I ever decide to do Elephant peak, I will try that route first.

@@Thebobfactor Thanks for the reply. I will look into the Libby Creek. Looks like there is a 2 mile trail listed on OnX. I am looking for a decent Elephant summit to propose to my gal at the top:)

@@Thebobfactor Also… Have you found a preferred app for the Cabinet Wilderness?

@@shawnhicks7078 What an awesome place to propose!!

@@shawnhicks7078 As far as apps, no I haven't. I use OnX, but it's wrong many times on trails and roads. I always just resort to topo maps.

Thank you! 🙂

Even though the TZ60 and TZ80 physically have the same size of LCD screen, I am not sure if it will be the same process to remove the LCD screen, and if the screw layout is the same. I would guess though that they would be quite similar.

@@Thebobfactor thank you. I'll take a look at screws and see if I've got a small enough screwdriver to open it.

It sounds as if there is something out of align, or something broken if it is shaking that badly and also causing the motor to be that loud. Normally I would suspect that there is sand or dirt inside the small channels that are inside the plastic tube sections, but since you just tore it apart and cleaned it, that wouldn't be the case. Tearing it apart and cleaning everything again, in hopes that something was missed, is about the only suggestion that I have. Unfortunately, as you and I both know, that's a big job. Sorry I can't be more help.

​@@ThebobfactorThank you for replying! I will try taking it apart again and see what’s happening inside.

Good luck with it @@c6rtierdilm. Give me a shout if you run into any problems, and I'll help out if I can. 🙂

I have always gone to eBay for camera parts. In some cases when I can't find the individual part that I need, I will look for a "for parts, or broken" listing of the same camera make and model, as long as it appears that the camera doesn't have an issue with the part that I am needing. 🙂

You're welcome. 🙂

I picked it up at Napa. I don't recall the part number though.

That's a great idea. Thank you.

That's awesome WildlifeBox. I'm glad the video helped you out. And great job on your part for tracking down the problem and then fixing it. 🙂

Thank you. 🙂

Hi Paul. I have the links for the screw layout diagrams in the description for the video above. You may need to click on "...More" button to see them. If you have any problems with the links at all, just let me know and I can email the diagrams to you.

Because that's typical mid 2000s GM logic 😂😂🤷

This 4.7L always idled in the range of 700-800 rpm.

No, I didn't do a calibration at all when I replaced the TPS. And I didn't need to reset the PCM or ECM. I believe that once I had started it after the new TPS was installed, that it idled a bit higher then normal, but after letting it idle for just a minute or so the idle came down to where it would normally run.

You're welcome. 🙂

Hi. Unfortunately it sounds as if there is more than just a problem with dust in this case. I would guess that it is an electrical issue with it. This video will get you inside the lens unit though to where you might be able to see what the problem is though, just in case it is something just preventing the IS to move.

@@Thebobfactor Thank you, anyway. And greetings from Germany :-)

@@HSVSystemfahrer You're welcome. 🙂

I used a Dorman 38453. Here's an Amazon link to them: www.amazon.com/dp/B007UT9TYW?psc=1&ref=ppx_yo2ov_dt_b_product_details

Thank you!