Glue is to sticky but hair spray isn’t sticky enough

How is the W5500 connected to the Arduino. Which pins on the W550 to which pins on the Arduino? This is not explained on the video or on Github...

Do not do this

omg it work thank you so freeking much!!! not even joking it work!!!

Hi thanks, it worked, but now my rasp does not boot anymore. When I remove the edited part of fstab, it boots again. I have no solution. I use a rasp 4B with 8 GB RAM, I use an original 5V adapter and I use the correct SATA adapter from Raspy Forum...😢

I was looking for a simple code for my esp32 Wroom-da chip to upload a file its creating itself to FTP, and im not even a coder. This was so overwhelming to watch. Really cool though 😁😁

It exploded my printer while i was at work

wasn't what I was looking for, but think it might help build what I need. Was hoping to build a Bluetooth device with a longer antenna and a port for a 1/4 inch TRRS jack. Seems its just like AUX, but with L+R+Mic stuff. Not sure what makes it different aside being bigger and such, but my new headset has it and doesn't allow changing the cable. Figure it would be cool just plugging in a thing and using it like a bluetooth headset lol.

With new Music Assistant this solution is up to date now? Or there are currently a better way to have multi-room audio for home assistant with also microphones.

I have the opposite problem, I no joke cannot get a print off! 😭😭😭 It’s a weird shape so I can’t get any grip on it was whatsoever!

Pretty wife

It looks nice

For those who are confused by the multilier (LSB Size), here is how to calculate it for both ADS1x15: multiplier = Gain voltage / 2^(bits−1) For the ADS1115, the FSR (Gain voltage) can be set to 6.144 V, 4.096 V, 2.048 V, 1.024 V, 0.512 V, or 0.256 V. The LSB size is calculated by dividing the FSR by 2^15 (since the ADS1115 is a 16-bit ADC, but the 16th bit is a sign bit, for ADS1015 it will be 12-bit - 1). Here are the LSB sizes for each FSR setting of ADS1115: 6.144 V: 0.000188 4.096 V: 0.000125 2.048 V: 0.0000625 1.024 V: 0.00003125 0.512 V: 0.000015625 0.256 V: 0.0000078125

Could you please disable the background music, it is very annoying...

Hey just to let you know as a fellow 3d printer using hairspray it will slowly get into parts you don’t want it getting into and it can ruin your printer just a tip 😁

Hi ! I am trying to communicate a board that has a db9 female connector , I put a prolific cable that has in one end the db9 connector, and in the other end a male usb connector, an adapter to USB-C, and, with this configuration (board- db9 to USB cable and adapter to USB-C) I can communicate to android cellphone, using a generic application for serial communications, I send 01 command, and the board does as expected, 05 comannd etc. Now, when trying to communicate with arduino uno using HW-044 nothing happends, I tried all softare examples, crossed the rx with tx, and nothing, can you help me ?

Will a 100 meter cat5 cable rj45 still send a receive a signal with this module

Use Flux

This is awesome thanks for the videos. Can I skip the LED part? just leave it out of the ESPhome code and not install them?

Surely the readings are thrown out by the weight of connectors and hoses attached to the kegs and applying pressure to them?

video starts at 10:40

i use silicone spray

Can't deal with the background music. Byebye

16:27 defaults

thank you..

Thanks for the video! I plan on using some 0201 LEDs soon.

Useful tip about checking the brushes. I wouldn't have thought of it.

I just tried to build a ZVS oscillator on the breadboard, everything was right and well connected but the MOSFETs just burns right when I connect it to the power supply.

Hi, your projects are great. We want to feature them on our channel (with proper credits). If it sounds good, then kindly reply.

Tone down the enthusiasm..... it's just annoying.

Can't really take you seriously if you casually touch your print bed with your bare hands.

this us literally R152A refrigerant, you can use it to fill a car or fridge

like for the family in the back, super casual

THX for the Video, made my Pi-Eyes working just after watching it!

Brilliant! I was about to embark on a similar project to track my 47kg Propane bottles. Do you think the load cells can handle that much weight?

Awesome, thanks for the tutorial. I was able to add my HP printer using the IPP protocol.

They are huffing it to frost theit lungs,DUDE!

How do I do it so that I can change the color of a single object? I'm guessing you put one script for each ball

Thanks for putting this up! I'm going to try making this w/o the LEDs for my 2 tap kegerator. I want to make a custom top for it where it'll have an e-ink screen to display current kegs/keg levels.

Question though, how long can it stay on for? Does it not burn the coil out if on too longk

thanks

Posting a message on X amd Facebook at the same time?

The MAX232 is for 5V, C = 1uF, the MAX232A is for 5V C = 0.1uF the MAX3232 is for 3V or 5V, C = 0.1uF

Worked perfectly for me, thanks a lot for preventing more e-waste from hitting the landfill! Put my old Pi 2 and LaserJet 1010 to good use. No need to spend money on a new network printer.

kzbin.infocUB0AJ5sh6k?si=tqUbbRAGK7JcYK13

I don't understand the "multiplier" of .00005. Does "ads.readADC_Differential_0_1()" read in bits and this converts bits to volts?

Nextcloud is supposed to be used over the internet as there are much better apps to use for LAN file sharing.

this doesn't happen btw unless you're pushing the limits of what your manufacturer can make in the first place

Thank you !

when I try and review the log file over wifi as per 17:36 of the video but I get "HX711 is not ready for new measurements yet!" When I check the logs via the scale being plugged in to the RaspberryPi I can see the logs values