lol, they went out of business a long time ago

Good

Are you still riding this beast?

Excelente gracias ora espera confía

Where can I get this assembly for my 4 stroke friction drive to be able to convert it to the chain drive

nah

Сколько обкатывал двигатель,Бро?

... херотень какая-то безпонтовая!-, ни звука ни изображения 👎👎👎😜🤭🤔🤫🤓👌,,!!!

Where can I get this set up at I have a weed Whipper and I've been trying to figure out how to hook it up to my mountain bike I like that set up that you have is there a website to go to how much is it for that setup can somebody tell me

do you still make friction drivekits??

Just love that weedeater sound !!!

Thank you

Where did you get the part for that I need to do that too

Buenas noches estima señor dónde puedo conseguir un motor de fricción con cadena dígame y cuánto es el costo y el lugar de venta soy de Panamá mucho gusto y un placer.

Spill on aisle #5. 1) torque is bending back side. chain is half inch away from tire. McFly, You seen nothing wrong with that. Maybe after it ripped tire doing 30mph you did. Why build mountain, To move a bike?. Dollar to Donuts, You folded company because someone got hurt.

wouldnt it pull to the left though

Thank you

How do you apply the brake

Sketchy "security check" trying to go to your site

You sound like an angry little airplane

I have a 1.34 on my honda gx 50 goes Mach 2.5 🚬💣👽💩🚲🎣🇺🇸

Fiyat ne kadar olur

1st comment since 9 years?

Good video, see also kzbin.info/www/bejne/Z3STqmyDiJqhoMk

I hope u are not dead but can y give us a update plz and what we need to build the friction chain drive step by step it will help alot of others again please

Pleas look may motor bike kawasaki tj 53.. 6 sped youtube kanal MARKO ZD

А с бензопилой дружба 2 электрон можно так

So, promoting the Friction Drive Engine Kit 12 years ago, how did that type of motorized bicycle sell? Hello?

Good to see a sensible 4 stroke setup, after all the cheap noisy 2 stroke smokers with the obligatory teenaged ring-a-ding-ding.

I done heard me a Peckerwood.

We really want a friction style bike but have always been deathly afraid of the flat-factor. Are you up to speed on any airless solid tires available today that would work with the traction kit? Thanks

Low quality video...why ?

the above link goes to volvo site

can you mount this engine on the front part of the bike .the problem i have is the rack in the back is weilded on so i cant use this motor on it. can it be used on the front tire

What are the best tires for use with this setup? Bell 26" Comfort Cruiser Flat Resistance tires seem to be the ones some folk with friction drive setups tend to swear by. Is this kit universal, in that any motor will work on it? Thanks for posting.

Eu quero saber aonde eu compro esse kits

Super ! :)

How unbalanced is it????

to "unloosen" something would mean to make it tighter

Hola amigo te tengo un reto instalarlo en una silla de ruedas en la parte de atrás como la vez te le mides Jaja

its 2019 october i have a very fresh as new something different A FULL SUSPENSION mountainbike not a hardtail built n converted with a new 4stroke kit and for sale im in ireland. truthfully thease are a max 10 stone load bike more for a kid for some fun or someone light not great for an adult

What's the point in having both?

Anything over 25mph is fast for a average bicycle

Berapa kecepatanya...?

I found these on eBay for $145, but to be honest I think it's overpriced for being such a simple device. There are cheaper and perhaps better options.

HONDA sucks! My motor broke after 2 months of use (BTW. it is made in Thailand, not Japan anymore). Those motors are known for problems. Here is an Email from Honda rep (who refused to sign his name...) I sond this motor 3 times to the local shops. They did not fix it. I contacted HONDA several times and nor rseponse. Finally they replied when I complained to Better Buseinsss Bureau. Here are few Emails I got from them. ================================================================================ Hello, XXXX (removed my name) What we have told you is that this application is not approved by Honda. What we have explained to you this type of application will always have problems since this engine was not designed to be used on a bicycle. Just because you can mount an engine on anything does not guarantee it will work properly, if you check with the company that sold you the kit you will find out it is not a approved application because it does not work properly because the application is as bad as it can get. Once again back in January I offered for you to send in the engine and we would inspect it, you will need to drain all the oil and gas out of the engine and pay for the shipping to us then we will inspect it and return it to you. Until the engine is inspected nothing can be determined at all, the engine would be returned to you at no charge. Honda has provided you with good customer service but unfortunately you do not like the answers you receive for the application of this engine. Your other Honda products worked properly because they were designed to work for the proper application. Honda Power Equipment 4900 Marconi Dr. Alpharetta Ga. 30005 Attn CR ref:_00Do0JBy0._5001Jk5aso:ref ================================================================================ Hello XXX We have inspected the engine for you and we see a few things that are causing the issue, due to the condition of the scoured piston and cyl we do not see a need to actually run the engine. Due to the metal particles in the engine oil it has been operated at some point low on oil, the extra fuel tank in the video with the modified fuel cap with a hose allows for a longer running time so the oil may not have been checked as often as it should. 1- The compression is low on this engine at 80 psi, the spec is 138 on a new engine. 2- The cyl. and piston are scoured causing the low compression and poor running, a bore scope was used to look into the cyl. 3- We added oil but never started the engine but it is very dark with metal particles mixed in the oil caused by the scoured piston and cyl. 4- The air filter is dry, this air filter should have oil or a product called Motul on the filter. 5- Holes drilled into the air filter cover allowing air to bypass the filter. 6- Non approved application for this engine. If you would like we can completely disassemble the engine and send you more photos but at that point the engine could not be reassembled. Please let us know what you would like us to do with the engine. Thank You ref:_00Do0JBy0._5001Jk5aso:ref MY REPLY: ------------------ This is in reply to your Email (regardless the fact you did not even sign your Email with the name). - You failed for inspect the motor properly (or even run it) - I personally informed you about the grey oil several months ago and your noly (false) concusion was that the motor has not been used properly - you making untrue statements about the motor application not providing PRINTED information regarding motor restrictions - you making false conclusions (regarding oil levels) - you making false conclusions about tiny wholes drilled in the plastic enclosure (not the filter) - you making false conclusions about the air filter which has been simply washed - you making false conclusions about the additional gas tank which simply has not been yet installed (connected) - you failed to communicate in professional manner (sending spam mail withoug signature) - you asked me to send the motor for repair which caused additional cost (for me) and failed to fix it - I requested motor replacement and after 5 days I have no answer. If I do not hear from you within next 5 days I'm filing public complain in the following agencies. This action will be escalated even more if the case is not handled as expected. My intention is to restrict HONDA from selling GX-35 motors in US as you do not provide expected support for those motors and the product is faulty. I made enough internet research and found hundreds (if not thousands) of consumers having similar issues. consumer protection agency. Federal Trade Commission (FTC). attorney general. Econsumer.gov You ignoracne and lack of profesionalism is below any limits. =================================================================================== Their reply: Hello XXXX We will ship Your engine back to you today. Thank You ref:_00Do0JBy0._5001Jk5aso:ref ***************************************************************************************************************** so they sending me back faulty motor, no fix, nothing, HONDA SHOULD HAVE THEIR LICENSE FOR SELING SMALL MOTORS IN AMERICA REVOKED. period!

HONDA sucks! My motor broke after 2 months of use (BTW. it is made in Thailand, not Japan anymore). Those motors are known for problems. Here is an Email from Honda rep (who refused to sign his name...) I sond this motor 3 times to the local shops. They did not fix it. I contacted HONDA several times and nor rseponse. Finally they replied when I complained to Better Buseinsss Bureau. Here are few Emails I got from them. ================================================================================ Hello, XXXX (removed my name) What we have told you is that this application is not approved by Honda. What we have explained to you this type of application will always have problems since this engine was not designed to be used on a bicycle. Just because you can mount an engine on anything does not guarantee it will work properly, if you check with the company that sold you the kit you will find out it is not a approved application because it does not work properly because the application is as bad as it can get. Once again back in January I offered for you to send in the engine and we would inspect it, you will need to drain all the oil and gas out of the engine and pay for the shipping to us then we will inspect it and return it to you. Until the engine is inspected nothing can be determined at all, the engine would be returned to you at no charge. Honda has provided you with good customer service but unfortunately you do not like the answers you receive for the application of this engine. Your other Honda products worked properly because they were designed to work for the proper application. Honda Power Equipment 4900 Marconi Dr. Alpharetta Ga. 30005 Attn CR ref:_00Do0JBy0._5001Jk5aso:ref ================================================================================ Hello XXX We have inspected the engine for you and we see a few things that are causing the issue, due to the condition of the scoured piston and cyl we do not see a need to actually run the engine. Due to the metal particles in the engine oil it has been operated at some point low on oil, the extra fuel tank in the video with the modified fuel cap with a hose allows for a longer running time so the oil may not have been checked as often as it should. 1- The compression is low on this engine at 80 psi, the spec is 138 on a new engine. 2- The cyl. and piston are scoured causing the low compression and poor running, a bore scope was used to look into the cyl. 3- We added oil but never started the engine but it is very dark with metal particles mixed in the oil caused by the scoured piston and cyl. 4- The air filter is dry, this air filter should have oil or a product called Motul on the filter. 5- Holes drilled into the air filter cover allowing air to bypass the filter. 6- Non approved application for this engine. If you would like we can completely disassemble the engine and send you more photos but at that point the engine could not be reassembled. Please let us know what you would like us to do with the engine. Thank You ref:_00Do0JBy0._5001Jk5aso:ref MY REPLY: ------------------ This is in reply to your Email (regardless the fact you did not even sign your Email with the name). - You failed for inspect the motor properly (or even run it) - I personally informed you about the grey oil several months ago and your noly (false) concusion was that the motor has not been used properly - you making untrue statements about the motor application not providing PRINTED information regarding motor restrictions - you making false conclusions (regarding oil levels) - you making false conclusions about tiny wholes drilled in the plastic enclosure (not the filter) - you making false conclusions about the air filter which has been simply washed - you making false conclusions about the additional gas tank which simply has not been yet installed (connected) - you failed to communicate in professional manner (sending spam mail withoug signature) - you asked me to send the motor for repair which caused additional cost (for me) and failed to fix it - I requested motor replacement and after 5 days I have no answer. If I do not hear from you within next 5 days I'm filing public complain in the following agencies. This action will be escalated even more if the case is not handled as expected. My intention is to restrict HONDA from selling GX-35 motors in US as you do not provide expected support for those motors and the product is faulty. I made enough internet research and found hundreds (if not thousands) of consumers having similar issues. consumer protection agency. Federal Trade Commission (FTC). attorney general. Econsumer.gov You ignoracne and lack of profesionalism is below any limits. =================================================================================== Their reply: Hello XXXX We will ship Your engine back to you today. Thank You ref:_00Do0JBy0._5001Jk5aso:ref ***************************************************************************************************************** so they sending me back faulty motor, no fix, nothing, HONDA SHOULD HAVE THEIR LICENSE FOR SELING SMALL MOTORS IN AMERICA REVOKED. period!

How come people take the clutch off when using a weed eater motor??

I am looking for this guys phone number. His name is Peter Taras. I bought a kit from him 3 years ago. He has since sold the company. I need to know the part # for the bearings. If anyone has his # for you post it here. OR , if you know the contact for the person that bought the company...thanks

Dude it’s a Nissan skyline bike with a Honda motor 😂😂😂