Bicycle Engine Kit - Install & Test Ride. Video 1 of 2

[@mastersduhgree]

This is the cleanest set up there is.Even the flat surfaced tire is well suited for the friction drive. I think most of us would just really like to know part names and #s. Thanks so much for tearing your bike down and making the assembly video for us.

[@OverlandOne]

I have the BMP kit mounted on a beach cruiser using a 50 cc 2-stroke engine and it is great! the kit installed very easily in less than 30 minutes and I ride every day and have had no problems at all. My bike will go over 33 mph and I love it. Thanks for such a great kit. Bill

[@TheBenoitProductions]

I ordered one kit, it was shipped promptly, well packaged and I'm still waiting for the engine to come in from a different company, but I'm already pleased with the quality and workmanship of this kit. Way better than expected! Good job James, keep up the good work! Thank you for producing a damn good quality product.

[@bridawg24]

Runs 25-30 mph full throttle. Wind and hills affect top speed. Not as fast as the chain driven motors but a lot more reliable. The ride is really smooth. I'm up to 1,925 miles now on the same rear tire.

[@kiallsop]

Friction drive is simple and reliable. This kit looks a lot like every other friction drive kit. The in frame 2 stroke "China Girl" kits are much lower quality (rag joint spoke breaker, dangerous chain tensioner, cheesy clutch mechanism, weak engine mounting system, enough vibration to break steel frames, etc.) but they can be made to work if you have the time to fix things as they break. I've installed 2 China Girl kits and one Staton friction drive kit. There are rear chain drive kits too.

[@173guitarman]

I made my own a few years back with a modded 49cc Kawasaki and the friction works ok long as its dry for one, and long as its adjusted right. I had it made so I could push down harder with my right foot for extra grip it helped to pedal start then let the motor take over. Sometimes if it came unadjusted I could feel hot tire pieces hit the back of my legs. I made an expansion chamber from a 250cc Honda and cut it down that helped with the top end I had it up to 38.5 mph and put many miles on it.

[@jeff.person]

Great video you are very thorough. I watched both videos one and two and plan on getting an engine on my bike. Keep up the good work!

[@wbelsha]

Very nice! Simple, easy to install and an enjoyable ride. Only problem, at least in my state, I don't think it can be road legal. Here we need to have turn signals, brake light, maybe mirrors and I think a certain type of brakes per code. Maybe there would be a way to also run a generator and have a small moped battery to power turn signals and such. If there's a will there's a way!

[@furmaster212]

the thing i like most about mounting it on a bike, is if you run out of gas, all you have to do is pedal to the next gas station. i have experience of running out of gas a few miles away from home on my goped, not only do you have to pick it up and carry it, you have to mix oil in with the fuel as well, which is hard to do when u need to have a precise mixture.

[@stevenb1928]

I bought and installed this kit. Overall I am very satisfied, but I am going to share a few negatives. The bracket bolts that were with the kit did not fit my bike. The bolt holes for mounting the gx35 honda engine were also too small for the bolts included in the kit. The throttle cable was too long for the gx35 honda engine as well. The set screws do not work with a typically allen wrench set. Last but not least, the roller eats up the tire if you open the throttle too wide at low speeds.

[@IchibanMoto]

nice vid ! might try to make one of these out of an old blender

[@Gatorsrok]

and u sure that the 4 hole mounting pattern is good on both these engines??? i just wanted to make sure that it was before i spent $120 on it. thx so much, uve been a great help

[@terceldude]

That's the same kickstand I have on my 1988 Novara X-R! ;-) that's awesome! :)

[@andyortiz4065]

thise Is the best instalación i have Ever seen in KZbin tuve thankyou.

[@mschiffel1000]

would using Loctite thread locker on the 4 engine mounting bolts be advisable ? the vibration might be an issue...this is a slick way to motorize your bicycle !...I like it.

[@anonkuntv]

did alot of researching and for the 2 stroke 66cc kit pirate cycles is the best choice

[@dellam04]

friction drive method is very simple to install but it's eating up your tire on every 3 tanks of gas... so if you're looking for a quick fun and cheap, this is a good start...

[@geraldhenrickson7472]

Nope. I get 2500-3500 miles per tire. Use the widest, smoothest tire that will fit. I recommend the Maxxis hookworm or similar slick or nearly smooth tire.

[@huuot]

You could use,or put a tree speed coster at your traction whell.You will get power and speed

[@aomimezura11]

@shrimper2121 not really, if you adjust the force just right, it's probably more efficient than gears or sprockets, but simplicity is the main selling point.

[@kingtheoriginal3039]

Nice video I'm working on a dirt bike project myself

[@kevinbeth2619]

Bro, you got some woodpeckers and neighborhood my man. Sounds like you're in the middle of the Bronx zoo! Awesome video though -- good work, and thanks!

[@nomadben]

Hey jb1970ny, where did you buy that friction drive kit?

[@Gatorsrok]

another question :):):):) does the electric start 49 cc engine have a optional pull start or is it only electric. thx for ur help btw

[@1skiinIan]

I have that engine on my weed wacker. it's a really tough engine too. 4-stroke...

[@nickalbanese7477]

Where can you find these in USA?

[@labanachecklowery5662]

Cool how-to video great upload!!!

[@OverlandOne]

Yes. It bolts right on and is already set up for a throttle with a cable adjuster built in. I would put this motor up against any other 2-stroke I have seen out there. I have a video of my bike on my channel here under my name Pirate88179 with more videos to come. Bill

[@dortega15]

Awesome idea! I want it!

[@dehoedisc7247]

So, promoting the Friction Drive Engine Kit 12 years ago, how did that type of motorized bicycle sell? Hello?

[@rickshred2517]

What application was your GX31 on (Tiller?). The fuel tank filler is a different angle than a tiller or weed whacker.........Where did you get that tank? Nice job Roadbug......great carb rebuild video as well !

[@andyortiz4065]

congratulation from Colombia Suth América thankyou.this Is they best And serios instalación seen

[@TimpBizkit]

Do you know if there's a way to remove the clutch on those engines and just use the shaft? I'm thinking of a total 48:1 reduction through a gearbox and sprocket to a large cog on the left pedal. I don't need the clutch cause I want to be able to start the engine by pedalling.

[@Immacountryboy]

How much did this kit cost? and nice woodpecker in the background haha

[@davison1021]

@jb1970ny what do you think about a 48cc chainsaw engine with a little bit wider of a tire

[@Mr420rush]

Thanks so much for making this: )

[@jaillson69fui1]

esse video e a minha cara

[@andyortiz4065]

thise ID the bestia instalación i hace seen información KZbin tuve thankyou verte muchas engineer

[@N.S.F.C]

Are you still riding this beast?

[@rickysimble6316]

hey can i use the gears on my bike so i have speeds and not just 1 gear or do i have to remove the gears in the front and back?

[@gmodesike]

does the kit use bearings or bushings

[@Lacrossanator1]

what is the spindle made of looks like a rubber layer???

[@skazazes1]

Could someone please measure the distance between the parallel red pieces that hold the drive shaft ? I am afraid that my tires are to wide for this mount. Thanks, Kaz

[@TonyFirelli]

is it street legal? cause it's loud or something... I want one cause i like bikes and sometimes i get tired so it would be cool to turn it on and go! :D what is a normal price for one of those?

[@mattman12893]

this bike came with the U bracket???

[@RagingNapkin]

wow sweet then it looks like i got to do this then thxs for the help

[@MarcelzinhoSandes]

What you used to make friction with the tire? Thanks

[@StevesAfan]

jb1970ny: that friction drive kit is nice and simple. It bolts on easily to the frame and has few parts to wear out or adjust. I looked at that site, bikemotorparts, but cannot locate such a kit. Can you give me the URL for that?

[@Djwill3]

Great video! tanks

[@skazazes1]

Thanks and how much did it cost?

[@shakesit]

why not mount it off the seat post like the Champion kits?

[@jamieturnage4574]

can you mount this engine on the front part of the bike .the problem i have is the rack in the back is weilded on so i cant use this motor on it. can it be used on the front tire

[@malcominthemiddle0]

do you have to have that exact engine or could it be from a different company?

[@MTJLT]

Hope you have stock in a bicycle tire company.

[@BrasiHipnologo]

Muy ingenioso, enhorabuena

[@stichell11]

hey guys, i was wondering if i could use a 5hp Horizontal 3/4"x2.44" Keyed Shaft, OHC, Recoil Start, Constant Speed Throttle honda engine instead of the one you guys used, it weighs 33 pounds so do u think it will be ok, as in will the frame support it? so please get back to me with the answer ty

[@BadIdeas101]

Would a 33cc chainsaw engine work on these kits?

[@Fridgemusa]

Is that a woodpecker in the background LOL?

[@pclose9]

Hey I just now visited their website 'and they don't have anymore friction drive bicycle engine kits ' do you know who has any?

[@Gatorsrok]

hey does anyone know if u can use a 49cc Scooter Engine with Manual Pull Start OR a 49cc/ Scooter Engine with Electric Start for an engine... i saw where it had the right clutch but i didnt see if it had the right 4 mounting holes to mount it on the bike thing??? can anyone help?

[@mustafa104mz]

great job thank U

[@ryanreilly4082]

annoying ass woodpecker uhave in the back there..lol nice video :)

[@wms702]

Ryan Reilly That thing is hammerin down, loud as hell.

[@aleshahenry6705]

WHere exactly can I buy this kit Sir? Great video btw. Ty

[@Gatorsrok]

yea it should i have a huffy bike and on mine it has hole to mount engine and so should urs. hope i helped any. lolz :)

[@PP.EKOTECH]

Super ! :)

[@RagingNapkin]

would this eat up a road bike tire?

[@aTellerOfTruths]

@neverlast666 Hondas are always expensive, but they're worth it.

[@michaelbearse4733]

How come people take the clutch off when using a weed eater motor??

[@allaeor]

can this be mounted on a bmx, and where can i buy a kit?

[@danielbowlin9199]

will this type fit on a 29er

[@Miklalo]

Do you have one for the fat bike tires?

[@MaaziJay]

How fast can this motor go?

[@nemanjakatanic1523]

How can I tell this roller what is the thorn on the tire as it is called? Thanks in advance :)

[@ActiVideos]

you can run this bike even if outside raining ??? :P

[@pclose9]

Is the wheel on you're bike 24 or 26 in ?

[@bridawg24]

Update: 3,053 miles as of July 5th. Still haven't changed tires. The little Honda GX35 is still going strong. No problems with the kit either. No wear on the drive roller and the sealed bearings are still nice and smooth. The only problems have been with the bike. Two broken spokes, both on the back wheel. No big deal. The wheel was a cheapy. I have upgraded to a heavy duty wheel to prevent more broken spokes.

[@williamhaskellhaskell3162]

Hi. Is that a. Knurledroller?

[@williamhaskellhaskell3162]

Or the more aggressive drive roller ? Spline?

[@williamhaskellhaskell3162]

I may buy a station kit with the 2 stroke 53 cc. Spokes are breaking ! Why?

[@dortega15]

How about an idea of mounting the engine I

[@thetrainguy1]

I have A stingray cropper bike (I am 13 years old) And can that fit it? replay if you can

[@LiveToRidee]

btw a chain driven one costs like $120 bucks

[@brokenstatuss4779]

wouldnt it pull to the left though

[@Paintballa4life96]

How fast can this thing get if i am 100 pounds at full speed

[@ronan8834]

for that 4 stroke Honda engine do u need a licence

[@flightmotive]

That is amazing!

[@SuperBigra]

does these work with a 43cc engine

[@nathandean1687]

will it work with the ryobe 4 cycles as welll?

[@Pull_It_Apart_Paul_Ham_CB]

Hello Where do I purchase some of these kits? I went to the web sit and it's just a poogle marketing site. I don't want the engine just the kit with larger drive cylinder to australia.

[@jamescharlesworth775]

Try it again it worked for me

[@luisdav2202]

i have got the gx25, is this kit compatible with my motor?

[@eastrockaway11518]

Yes

[@luisdav2202]

+eastrockaway11518 i did with a smaller roller hahah

[@scottT1995]

how much was the honda motor m8

[@petersymons7817]

Thank you

[@yesschembri]

Wouldn't this rip the tire ?

[@J89943]

why dont u chain drive instead of rollers ?

[@licensedhobo]

doesnt it tear up the tire

[@gabrock55]

could you put something like this on say a "Sedona st Giant"?? thanks

[@chevygearhead454]

where can you buy this kit

[@landykid60]

is that a woodpecker i hear???

[@mastr323]

Okay, but they are still illegal in Ontario. The fine is $6250 (no insurance).

[@SpenCapp]

i would by just the mount all i can find on the internet is the kits with the motor for like 300 bucks...

[@chuckbear1961]

O & R had a system like that wich was called the "Chicken power"

[@2431hayden]

The kit is about 150.00 dollars.

[@vassu94]

where can i buy it?

[@robertfournier535]

Is it disponible on Canada?

[@bryanprilliman1044]

how fast and hows the ride?