RoadBug Bicycle Engine Kit, Motorized Bike - Drive Roller Change

[@OverlandOne]

Great video. I didn't know we could swap out the drive rollers this easily. Thanks. Bill

[@a1930ford]

What are the best tires for use with this setup? Bell 26" Comfort Cruiser Flat Resistance tires seem to be the ones some folk with friction drive setups tend to swear by. Is this kit universal, in that any motor will work on it? Thanks for posting.

[@yiddishcowboy]

I like this setup. Would a cheap bike from Wal Mart work with this motor?

[@doctorbillzable]

We've always called "Snap rings" "Jesus Clips" Because when you lose them, you shout "Awe Jesus I lost it!"....said that many times.

[@geraldhenrickson7472]

If you spend enough on a good set of snap ring pliers...they become just snap-rings again. Trouble is they coat too darn much...Jeez...

[@KingdomUploader]

We really want a friction style bike but have always been deathly afraid of the flat-factor. Are you up to speed on any airless solid tires available today that would work with the traction kit? Thanks

[@geraldhenrickson7472]

Yikes...this is a great look at this system! Appears to be a better set up than my monsterbike/dimension edge or my Staton Inc. system. Thanks!

[@robertparker1767]

Where can I get this set up at I have a weed Whipper and I've been trying to figure out how to hook it up to my mountain bike I like that set up that you have is there a website to go to how much is it for that setup can somebody tell me

[@чиполлино-м9п]

Сколько обкатывал двигатель,Бро?

[@ViralWatchMedia]

hey guys i just got this kit put together today and ill be soon uploading videos of it soon!!!

[@darrenmillion1432]

What is the diffrence from the factory roller to the one your putting in it?

[@pal8383]

all i need to knw is how do u make the weel spin with the speed controller i wana make this for my bike?

[@dandonna1983]

i went to your site and they have shut your website down is there anyay to buy these kits from you ? and about three years ago you showed a how to build this kit step by step would you be willing to share this video again?

[@ViralWatchMedia]

this kit works great with the titan from thatsdax,

[@skygodess003]

does this type of system wear the tire out ?

[@Interdiction]

Yes it does and it is also very sensitive to tyre choice

[@yamahonkawazuki]

@uSee218 this is one of FEW chinese engine kits id trust. ive put almsot a thousand miles on my first motorised bike. it is still running today.

[@jonniethajunglist]

to "unloosen" something would mean to make it tighter

[@rcROXX]

We're did u get that engine I want one so I can put it on my e300 plz respond!!!!!!!!!!!!!!!!

[@Rinty145]

I think you may need a driving licence and insurance, but I'm not certain about that. What I do know is, if the bicycle is assisted by the motor beyond 25.5km/ph, yes you certainly do.

[@flipzrazer]

How well does the clutch do?

[@stevealderson333]

what is the size of the clutch ana predator 79' engine

[@Xemucnhathuynh]

cai nay anh che co bi hu vo xe ko

[@MrPapapag]

How about a new revised Video since all the information is out of date- Making the installation Harder to install- Thanks-

[@tylerdillon8861]

I know some people can't physically or are mechanically inclined I should say to build there own but the kit kind of takes away the purpose to have a unique weed eater/chainsaw bike

[@stopglobalswarming]

@fiji555 BMP is defunct, supposed to be resuming operation under new ownership. I waited as long as I could and bought a Dax kit at thatsdax 9 com

[@1superocky1]

hi do you happen to know the law regarding your kits being fitterd in the uk ? many thanks r .

[@ЛеонидДергач-ж7в]

Перенеси мотор под раму,улучшится управление!

[@Christ-is-King-]

could i use a echo weed eater engine?

[@lot0818]

Were u buy it @

[@88ranchok]

what does that cost

[@jaillson69fui1]

gostei muito tenho tambem ideias semelhante

[@AuMechanic]

Fit a CVT- got a video on my youtube channel of a CVT on a bike with GX35 honda engine and a source for them in comment section, they are cheap.

[@mrcoffee315]

can you give me the link of the site?

[@eastrockaway11518]

Are you guys still in Business

[@geraldhenrickson7472]

Yes...Just visit the link above and there they are! Roadbugmotors.com

[@1superocky1]

thanks anyway all the best r,

[@vladoiraklisg10]

this is 49cc ? :)))

[@galipsarcicek6058]

Fiyat ne kadar olur

[@lunguyen1350]

xe dap do rat dep qua'

[@briandevine1000]

class.dose anyone know any websites based in the uk or ireland

[@ricochetey]

the bike he is using i bought at wal mart

[@BrokenSwordTutorial]

kmh?

[@stopglobalswarming]

These are perfectly legal on the road in many states of the US. visit motoredbikes and motorbicycling com websites to see.

[@tebmenja]

bikemotorsports is offline

This system of transmission is more bad for the tire.

[@geraldhenrickson7472]

Yes but not nearly as bad as everyone would make you believe. You can get 2000-3000 miles off the right tire. Friction drive just does not work well with a knobby. And there are no chains, sprockets or extra weight involved. The whole thing with a 2 stroke engine can weight under 10 pounds. Maybe even less.

[@stevemasterson7776]

Y'all do realize this thing puts out about 10 times more CO and HC than a V8 Cadillac right?

[@robertgreendyke8617]

thank god! these new york winters are getting old.

[@geraldhenrickson7472]

Nope...most of the newer 2 and 4 stroke engines are DEQ/EPA approved. They put out very little emissions. Of course the better engines cost...a lot more. Like $400 or more. Unsure what emissions the knock-offs produce though...they seem right out of the 80's.

[@stevemasterson7776]

Yeah this is a weed whacker engine..... do you really think that costs 400 bucks? With out direct injection these 2 strokes will put out way more hydro carbons than a car

[@augiereil2351]

So what.

[@Jigsaw_knows]

So what

[@mrcoffee315]

please somebody can give me a site of weedeater bike kit 0_O

[@Darkskate12]

@TOPGEARisC00L 4

[@MeDicenMoringa2]

como lo hago

[@jeffreymorris4827]

I have a 1.34 on my honda gx 50 goes Mach 2.5 🚬💣👽💩🚲🎣🇺🇸

[@joeycottontail4527]

I have GX50 also and it also does Mach 2.5 but my Zenoah g43 does Mach 3.

[@rushcummins8257]

Loud

[@saxbruce]

Sounds noisy- why is the rider not wearing any type of helmet at all, whether a bike helmet, or even an open-face motorcycle helmet? Lack of imagination, or a death wish? Are the brakes up to the task? Are the bicycle tyres ok for the speed attained? Just asking.