2 ай бұрын
Пікірлер
@cjjean8704 2 күн бұрын
Did you have to buy the flux separately from the rework station?
@dackselectronicrepair Күн бұрын
Yes I did.
@kimstube7244 2 күн бұрын
This video was awesome! Thank you so much! The back camera now works!!!! We’re really excited! 👍👍
@dackselectronicrepair Күн бұрын
Awesome job!
@higoraguena 4 күн бұрын
Nice work on the hdmi. But i would take care of that dry spot on the metal liquid as it sits right behind the whole assembly. I had one overheating and turn itself off on me.
@dackselectronicrepair Күн бұрын
Good call, if you get even a small area of dryness on the chip it will overheat!
@higoraguena Күн бұрын
@@dackselectronicrepair I'm a novice. I only know that bc it happened to me a month ago, and i had to redo everything. all the 500 screws haha. I'm about to replace my first hdmi port so tnx for the video.
@josielove0849 4 күн бұрын
And you just saved a 16 year old girls life. Thanks so much man. Yes I did this myself.
@ser-j9d 5 күн бұрын
thank you 🫡
@dackselectronicrepair 4 күн бұрын
You are welcome!
@edenfanali8902 7 күн бұрын
this is the best tutorial video that i have ever seen for something like this
@dackselectronicrepair 4 күн бұрын
I am so glad!
@MrShkafkupe 12 күн бұрын
Do you have to remove thre whole thumbstick assembly? I just want to replace the potentiometers
@dackselectronicrepair 4 күн бұрын
Yes you would. They are part of the assembly.
@BABASQUASH 13 күн бұрын
what do i do if i dont have a heat gun
@dackselectronicrepair 12 күн бұрын
You could use a desoldering wick and a solder sucker to remove all the solder from the legs and pins of the hdmi but it would be a long process.
@Alan-e7i7d 18 күн бұрын
Hi, just finished my first HMDI socket replacement and all went well following your instructions. I found it was worth tinning the connector tabs before fitting the socket to ease soldering them to the board. Thank you.
@dackselectronicrepair 16 күн бұрын
Glad you got it done!
@maneloc7751 24 күн бұрын
Thanks! Useful tuto!
@dackselectronicrepair 19 күн бұрын
Thanks for watching!
@iLuvGaming 25 күн бұрын
I really need to learn how to solder it can save money and come in handy even if wanna make side money
@dackselectronicrepair 19 күн бұрын
You should! It is a skill most do not have which makes it profitable.
@chusiangyew4006 27 күн бұрын
the most annoying removal sticker....🙄
@dackselectronicrepair 19 күн бұрын
Yes they are, I can count on one hand how many times I was able to remove them by pulling and I have done a ton of them!
@kennethshiro9500 Ай бұрын
how does this shit get so dusty. these mofos have only been out for 4 years
@dackselectronicrepair 28 күн бұрын
I know, but really it is just a giant fan tube that vents out of the top! These things just suck everything out of the air!
@danielweiss4498 Ай бұрын
I think your mistake is that you only did one side with liquid metal, officially it says you should do both sides with liquid metal
@dackselectronicrepair 28 күн бұрын
I have found that you it is better to just do the motherboard side. It has the foam walls that make sure it doesn't leak onto any other components when resandwiching the cooler back on. Everything stays where it should. I do make sure the cooling pad side does not have an oxidation on it so it transfers the heat properly.
@cRado07v Ай бұрын
I found this video extreamly handy. I'm going to try my hand with this repair following this video as a guide. Thanks!!!
@dackselectronicrepair 28 күн бұрын
I hope it works for you!
@cRado07v 23 күн бұрын
@@dackselectronicrepair It worked quite well! Im waiting for a new SD card reader for it. I damaged it in the reassembly process. Otherwise everything is back working like new.
@Cam-lh7nr Ай бұрын
This is why i just use pc. Tike to buy another PlayStation since its half the price of the repair. Nice
@dackselectronicrepair Ай бұрын
Pc is great as well!
@frunkchungus Ай бұрын
It would be vastly easier and require a lot less heat if you were to solder-wick most of the existing stuff out after mixing with leaded solder Also, it seems safer and less labor to once the old port is out, to wick all the old solder away. clean, then re-flux the pads, and run over with leaded solder to tin them. Drop the new port on top, legs still empty, and hot-air the port until it snaps into place with the tinned pads This prep and new tinning of fresh leaded solder will minimize the chance that you end up with a bunch of loose connections as you aren't missing half the solder taken away on the old port, too. Lastly, hand-solder the legs now that the pins are connected. Check for loose connections and bridging
@dackselectronicrepair Ай бұрын
Yes you can do all these extra steps if you desire. I have found that adding solder back to the pads is enough to make the new ones stick just fine without using a solder wick. Tinning the legs of the new port is something that can be helpful.
@romamazlov4351 Ай бұрын
Do I need to change the liquid thermal pads?
@dackselectronicrepair Ай бұрын
Do you mean do you have to remove the old liquid metal? If so, no you do not.
@romamazlov4351 Ай бұрын
@@dackselectronicrepair nope, thermal pads
@jeremydack2375 Ай бұрын
@@romamazlov4351 Only if they come off, I have never had to.
@romamazlov4351 Ай бұрын
@@jeremydack2375 I smeared the new ones, there were traces of oil next to the old ones
@WhiskeredBope Ай бұрын
Great video, thanks for sharing. At 07:25, what are you spraying the board with, and is this step completely necessary? I'm trying to fix some controllers without spending any money on tools, and my school has just about everything needed except for cleaning solution.
@dackselectronicrepair Ай бұрын
It is isopropyl alcohol. Not necessary with no clean solder but I like to clean it up.
@KrishanVaish-j7m Ай бұрын
I did this and now my gpu showing black display
@dackselectronicrepair Ай бұрын
Make sure it is seated properly in motherboard and that all the connections are correct
@KrishanVaish-j7m Ай бұрын
@@dackselectronicrepair yes I did that plenty of time same result
@Leodagan84 Ай бұрын
Amazing skills! I accidently removed the left stick ribbon cable connector from the PCB :(. I tried to simply put it back in place but the left stick is not working anymore (there seems to be a lot if pins to align correctly within the connector). Do you happen to know if those ribbon cable connectors are also soldered to the motherboard? I can't believe I removed it so easily. Too bad I live in France, I wish you would repair my controller!
@dackselectronicrepair Ай бұрын
The ribbon cable retainer clip broke off?
@Leodagan84 Ай бұрын
Yes 😅 the plastic part pop off, but the internal metal pieces are still soldered to the motherboard i can't find anything about it online
@dackselectronicrepair Ай бұрын
I am not sure where you can source one of those
@bearkennedy2265 Ай бұрын
HI! I bought a broken xbox series s and I would like to try to fix it myself (before practicing on some cards to throw away), could you please recommend an air gun around $150? Something just right to start with. Thank you!
@dackselectronicrepair Ай бұрын
This is the one I have and it works very well (You can spend way more but I haven't found the need to). www.amazon.com/gp/product/B07RPMR4Y4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
@KAKUN_DESU Ай бұрын
for a second i thought there was a third hand. I almost shat my pants
@dackselectronicrepair Ай бұрын
That is all I want from my videos, not to help or share knowledge, but to make people almost poop their pants. Almost though, not actually poop, I am not a monster.
@Dave_W861 Ай бұрын
Can you link to the Liquid Metal kit you used?
@dackselectronicrepair Ай бұрын
Liquid Metal Thermal Paste, 79... www.amazon.com/dp/B0BLZ41J1B?ref=ppx_pop_mob_ap_share
@thebeez9487 2 ай бұрын
Many years ago my buddy and I would play some madden football game on PS1. PS would overheat and game would freeze. That's when we would put it in the freezer and go smoke a bowl. Start over, ps be ok rest of the night.😂
@dackselectronicrepair 2 ай бұрын
Yep this is the PS5 version of freezer and smoke a bowl!
@WrldAbysss 2 ай бұрын
as a 15yr, i followed through all of it, i got to the point to where you mention sotering, and i got a little mad, we/mu parents, and i do not have a sotering kit... im going to leave it apart for maybe a day or two, i don't know if that will mess up the thermal pads though.
@WrldAbysss 2 ай бұрын
(also, I'm doing this all by myself too, they will not help me nor buy anything for me. will I need a sotering kit? if so what's the best cheapest brand?
@dackselectronicrepair 2 ай бұрын
That is awesome you are attempting to fix your hdmi port. You really need a hot air rework station with a soldering iron and hot air gun. I don't want to discourage you but this is a difficult job to start with.
@Cam-lh7nr Ай бұрын
Ya sorry buddy Sony is a dream killer
@joshuaandre9099 2 ай бұрын
So swapping the mother board into a new phone saves all of your settings and content?
@dackselectronicrepair 2 ай бұрын
Yes that is correct. When you swap all the internals to a new screen and frame assembly all your information is there.
@shannontaylor4384 2 ай бұрын
Love the gross grodiness of broken lol
@dackselectronicrepair 2 ай бұрын
There is something very satisfying about taking a gross broken thing and making it perfect again!
@jeromenavalta5914 2 ай бұрын
I just fixed one that is a store inventory where I work, I wished it was this easy but the whole hdmi basically is ripped out and 2 solder pads is missing and have to run a very small thin copper wire and it is a pain in the a++ to do. I wished it was this easy when I did it.
@dackselectronicrepair 2 ай бұрын
Yes it is no fun when the traces get ripped out! Not impossible but very frustrating. I had one that had half of them ripped off. I had to start and walk away for a day on that one!
@jeromenavalta5914 2 ай бұрын
@@dackselectronicrepair it is the same of what I encountered, I have to just leave it and went back to it the next day...
@msn3033 2 ай бұрын
I’ve replaced this screen a hundred times for work but the ear piece speaker keeps failing every time I move it. Any tips?
@dackselectronicrepair 2 ай бұрын
Make sure the pins are not bent in the wrong direction and that they line up with the copper pads, it is possible you just need to replace that part as well. Good luck!
@msn3033 2 ай бұрын
@@dackselectronicrepair Thanks! I didn’t know they existed on Amazon for $7, gonna grab a few. Cheers dude
@BlackArab_ 2 ай бұрын
Hi, can I send my son’s iPad to you please? It’s the same model, please help, I’ll pay. I live in the Caribbean, I could get it to you if you say
@dackselectronicrepair 2 ай бұрын
Not sure that would be very cost effective for you but if you want to send me message on my Facebook business page that would be fine. facebook.com/dackselectronicrepair
@Adam-wx9jp 2 ай бұрын
A32 has one of the weakest screens ive ever seen. Thanks
@dackselectronicrepair 2 ай бұрын
Yes that is true, luckily the replacement screens are pretty cheap!
@namsukeichinose 2 ай бұрын
Does it need to be warmed up first like cpus? Also are all gpus like this when opening? My pny 2070 super triple fan (not xlr8) is so unknown i can't find the exact video for the card
@dackselectronicrepair 2 ай бұрын
Not sure what you mean by warming up the cpu but no you do not need to heat anything to replace the thermal paste. Yes the majority of GPUs are like this. They are just a board with the processor chip and ram attached to a heat sink. Some use passive cooling (no fan) or active cooling (fan or liquid cooling block). The thermal paste transfers the heat from the chips to the heat sink so it can be dispersed.
@testtickles7392 2 ай бұрын
Very useful but man I think theres no saving my phone
@dackselectronicrepair 2 ай бұрын
Sorry to hear that! It does happen though.
@zeedstaffs5056 2 ай бұрын
Excellent tutorial. Subbed for sure.
@dackselectronicrepair 2 ай бұрын
Thanks for the sub!
@alexwong-s7s 2 ай бұрын
Do we need to replace the frame as well? The old frame can be reused right?
@dackselectronicrepair 2 ай бұрын
Yes if you want to do a screen only repair you can but I prefer to do it this way.
@jasephase2k933 3 ай бұрын
Removed useing a desolder iron could please tell me under blue part of alps analogs is the solder around the holes because is no solder around a few please reply
@dackselectronicrepair 2 ай бұрын
Some of the legs don't have any solder on them? You can just use flux and solder the legs that don't have any.
@jwill18000 3 ай бұрын
Dack, I am trying to get ahold of you to see if you can do work on a ps3 backwards compatible for me
@dackselectronicrepair 3 ай бұрын
You can contact me on my Facebook page facebook.com/dackselectronicrepair
@jwill18000 3 ай бұрын
@@dackselectronicrepair I don't use Facebook which is why I'm reaching out through here
@stuart99299 3 ай бұрын
Is that lead free solder?
@dackselectronicrepair 3 ай бұрын
The original solder Apple used is lead free. I use leaded.
@stuart99299 3 ай бұрын
@@dackselectronicrepair I did mine with unleaded and it didn't flow. Managed to pull of some of the pads that you said be carful not to. I used leaded and it was much better. 😔. I need to put it back together and test if im lucky. Im thinking maybe its just data on the missing ones. Fingers crossed.
@shikaro639 3 ай бұрын
I've never soldered before but i'd like to change my joysticks to hall effect joysticks what tools do you use do you have links?
@dackselectronicrepair 3 ай бұрын
I use a hotair rework station. You can get them on Amazon. It has a hot air gun and a soldering iron which are temp and airflow adjustable.
@drpeemac 3 ай бұрын
Thank you...please guide is there a differnece between sm918U vs sm918B i presume us model has antenna in the side which you glued with glue strip ?
@dackselectronicrepair 3 ай бұрын
From my understanding the U model is programmed to work on the common bands here in the United States and the B model is for other countries. I don't know exactly what the hardware differences are though.
@terrawilcox2911 3 ай бұрын
What exactly do I need if my screen is just cracked?
@dackselectronicrepair 3 ай бұрын
The glass and display are glued together so you would need the whole assembly like in the video.
@tylerjones8145 3 ай бұрын
I've done this 4 times, two were successful, and the other two I ended up melting the underside of the analog stick...what am I doing wrong?
@dackselectronicrepair 3 ай бұрын
It really is a time sensitive repair. You have to get all solder in all the legs heated up at the same time so you can basically just drop the new stick into place and remove the heat right away. If you leave the hot air going for too long after you put the new stick in place you will melt the underside of it. A little melting won't hurt anything but too much will make it not work.
@katinenk834 3 ай бұрын
Sotter? Is that how u spel it? Sorry I am from Finland so I don’t know the right way to spell it. But I have to say, your work looks really impressive. I have done this kind of work also, so your post looks interesting to me. Thank u for this 😊
@dackselectronicrepair 3 ай бұрын
Thank you! I have always wanted to visit your beautiful country! It is spelled solder but pronounced sotter.
@katinenk834 3 ай бұрын
Thank U for your answer. Now I know it is solder 😊 My country is one to visit I can say. 😊 Can I ask U to do some repair video for me to learn? For exsamble to fix charching cable? Or is that interesting to U or do you do this kind of work?
@dackselectronicrepair 3 ай бұрын
What do you mean by a charging cable? The cord or the wall brick?
@katinenk834 3 ай бұрын
I know that these days fixing a charging cable is kinda stupid bc those are so cheap, but I’m just curious. 😄 My cable broke just at the end of the wall brick bc it was bend. So the red wire was broken. I don’t know if it is worth to try to fix it, but it is a really long cord so I would like to try. 😊 I totally understant if u do not want to do this kind of work 😊
@xddarko 3 ай бұрын
I have to say that the little tip u gave concerning screws positions when tearing down, must made many happy like me because none of the other videos even bother to share that and focus solely on the phone. Thank you!
@dackselectronicrepair 3 ай бұрын
Glad to help!
@thestandardd 3 ай бұрын
I would like to get mine fixed by you guys
@dackselectronicrepair 3 ай бұрын
I appreciate that but it may cost you too much to ship it to Iowa! Any good computer shop should be able to do it for you!
@Lemonhead8890 Ай бұрын
@@dackselectronicrepair where in Iowa?
@Lemonhead8890 Ай бұрын
nvm I think I found where you are, a bit far even for me (very NW corner of Iowa)... a friend of mine asked me to see if I can fix their digital PS5 but im pretty sure it is the port too. I could probably do it, but may be a pain and I'd have to order the HDMI ports since I don't regularly do this sorta thing.
@Buddy-u7v 3 ай бұрын
I did not listen to the part about being carful with the plastic connectors and now half of one is black😂
@dackselectronicrepair 3 ай бұрын
That's not good, hopefully it is just a little toasted and not broken!
@soso-nm2db 3 ай бұрын
Do you need soder and flux and all those liquid or is there any other liquids to use
@dackselectronicrepair 3 ай бұрын
The purpose of the flux is to help the solder melt and to make the new solder melt to the pins. You do not have to use it but it makes it MUCH easier and cleaner of a job.
@Laurence-dc2is 4 ай бұрын
Thank you!
@dackselectronicrepair 3 ай бұрын
You're welcome!
@themac1869 4 ай бұрын
I’ve been trying to learn how to fix my ps4 as 14 year old this video has helped me so much thank you
@dackselectronicrepair 4 ай бұрын
That is awesome and impressive! Keep it up and you may be making your own repair videos someday!
@themac1869 4 ай бұрын
@@dackselectronicrepair I hope so