PortaKeeper

Пікірлер

@FatNorthernBigot 3 күн бұрын

I have the new version, with the plasma generator and it's really is top notch. (I had the DF83 and failed to get a consistent shot)

@GraysonCarr 2 күн бұрын

Have you had the issue with the plasma generator running all the time unless you unplug and giving off a low hum? I heard the RPM LCD and plasma generator never turn off when the machine is plugged in, which seems like bad design.

@FatNorthernBigot 2 күн бұрын

@@GraysonCarr The RPM is constant, yes. I think they may have reduced the light of the LEDs, slightly. I don't hear anything, so maybe the plasma generator isn't on. Can't say for sure.

@LaserSharkPhotoablations 4 күн бұрын

Not sure I ken the thinking in putting a multi purpose burr in a espresso focus grinder?

@LaserSharkPhotoablations 7 күн бұрын

a nice addition to my machine is the clear mini hopper from the 64P i make 6 cups a day.. the mini hopper lets me use the bellows and hold enough for a day.

@ozeltzex1 12 күн бұрын

Huge thanks for this video!

@335861282 14 күн бұрын

Hi, I was curious if you had experience with the mahlkonig x54? If so how does it compare to the atom 60? For espresso only

@portakeeper 13 күн бұрын

@@335861282 I don’t have any experience with it.

@RedZerom 21 күн бұрын

You prefer this method for v60 or Tetsu Kasuya one?

@Chemari Ай бұрын

Hi Barrett great video just wanna ask what would you choose this SanRemo You or the Rocket R91?

@portakeeper Ай бұрын

@@Chemari hard to answer. Never owned an R91. Been around. They are nice machines. Similarly priced, Rocket is less. Wish I had a better answer. Both very nice.

@tiagomiguelantunesdealmeid8778 Ай бұрын

where i can find the sk40 in europe? I live in portugal

@almiglad Ай бұрын

The way you pour from the far edges to the middle makes me feel sick

@portakeeper Ай бұрын

then I guess don't watch lol

@dgasmd1 Ай бұрын

Leave to people to find 33 extra ways of answering questions that don't exist. Way too much unnecessary work!!! This should have been a 45 sec video really!

@anthonychin3171 2 ай бұрын

Best all round compact 64mm single dose unit for the price ....quiet and as powerful as you need ...and so compact for domestic use. Have had one for 12 months and it does it all. No complaints.

@nar2086 2 ай бұрын

Does Dlc burrs grind for espresso?

@portakeeper 2 ай бұрын

Both dlc and stock espresso burrs technically the same but the dlc has a coating on them to reduce friction

@cy3404 2 ай бұрын

This machine is very futuristic. Just bought one online, but l found it's leaking underneath on the side after I press the two-shots button. And the water reservoir leaks so fast when I take it out. Is it normal? So confused and scared when I'm using it....

@portakeeper 2 ай бұрын

Does not sound Normal at all. Possibly needs some seals repaired. Could be an opv recirc line too if it only leaks while in use

@mrneilti 2 ай бұрын

You don't think the boiler can leak at the rear left when looking at the rear of the machine and then collect onto the horizontal plate and can find away through the mesh on the on the left ? Just questioning your statement how water cannot get on the electronics ?

@iSnipedET 2 ай бұрын

Wouldn’t a 19s shot compared to 25s shot taste different anyways? Not the expert, but would’ve been more of a level field if each shot had the same pull time/weight

@Coffeeinthusiast1 2 ай бұрын

What would you recommend as a second grinder for single dosing between the new DF64 vs SK40? Thank you!

@gk5450 2 ай бұрын

I cannot see for sure but you may have the tray mounted in transport mode. There are two more holes to the back of the tray holder that would allow mounting the tray about an inch forward.

@portakeeper 2 ай бұрын

Hmm I never noticed. if this is true that would make the machine more usable, but at my house with a standard countertop, the machine would probably not fit onto my counter.

@hkrm11 2 ай бұрын

it's a brew boiler not pre boiler

@SuperMatrix59 3 ай бұрын

Pressure stats 😤

@portakeeper 3 ай бұрын

Not that bad. The pressure stat in this machine is huge.

@adityahr1039 3 ай бұрын

Hi, which better DF54 or Sk40??thks

@portakeeper 3 ай бұрын

Neither are better or worse, just personal preference

@saadshakir3346 3 ай бұрын

How's the support for this product line??

@portakeeper 3 ай бұрын

I think it’s good but there are a few distributors that are terrible.

@saadshakir3346 3 ай бұрын

@@portakeeper yeah that's the vibe I'm getting. I wonder if this is overkill for my gaggia evo pro.

@portakeeper 3 ай бұрын

@@saadshakir3346 not overkill at all. You have Mii coffee. Trash support. They don’t care. Skulking a sale. This grinder similar to Superjolly. I’ve been in love

@saadshakir3346 3 ай бұрын

@@portakeeper I watched a video they mentioned you made put on black accents on the df64v?

@worf792 3 ай бұрын

Isn't it better to put the beans in when the grinder is already on

@portakeeper 3 ай бұрын

Can do either.

@FatNorthernBigot 3 ай бұрын

I just upgraded my stock DF83 burrs for the DLC espresso burrs. It's a reasonably-priced upgrade. I don't believe SSP HU burrs are worth the money.

@portakeeper 3 ай бұрын

I somewhat agree, I like the stock burrs over the HU most days.

@FatNorthernBigot 3 ай бұрын

I've just ordered the DLC 83mm espresso burrs for my DF83, to replace the stock Italmill burrs. Really looking forward to the results, thanks to your video. 👍

@kyllerkill 3 ай бұрын

There’s way more 54 mm filters in homes then 58. I’d say 80% of home espresso machines in America are a breville. Most people don’t go for $1000 coffee machines. If they want to sell more they need to make one.

@portakeeper 3 ай бұрын

You are correct, many more 54mm tampers out there, but the majority of those people are not willing to invest in an auto tamper. Puq Press is about $1000, not many Breville Bambino fans are willing to buy the Turn Autotamper as the same cost as the espresso machine.

@arjangt 3 ай бұрын

Pump plastic into your grinds

@portakeeper 3 ай бұрын

Lol how?

@Rayee8 4 ай бұрын

What is the exact depth of lelit Mara ?

@portakeeper 3 ай бұрын

do not have anymore, should be specifications on their website.

@didac7884 4 ай бұрын

Excellent unboxing! I just got mine Difluid r1 a couple of weeks ago and I have to say it's all I wanted for my home coffee. Quick Q, what is this little white and turqoise A5 horizontal canddle chart? Thanks a lot 🙏🏼

@zjye 4 ай бұрын

Is df54 perform same as df64?

@portakeeper 4 ай бұрын

It’s good but not the same, so no does not perform the same

@thecoffeemess7298 4 ай бұрын

I know this was 2 yrs ago but still seems very relevant. I'm deciding between the DF 64 and the Atom 75. This video helps.

@portakeeper 4 ай бұрын

Both are quite different but yet the same. Atom has been awesome easy to use grinder. Latest gen 2 is pretty amazing as well especially at less than 1/3 the price. Really depends what you are going towards

@gokhangokalp9915 4 ай бұрын

Hi, I'm experiencing some issue with zeroing/alignement with my dlc burr. Once i zero it and grind something coarser around 60-70, then I can't get it back to finer. After that grind, new zero is becoming around 50 and hearing noises. Have you experienced something like that?

@portakeeper 4 ай бұрын

Unfortunately not really sure what is going on

@FaithAndCoffeeBean 4 ай бұрын

Good stuff 😎👍🏽

@rlb2444 4 ай бұрын

Oriental junk

@ChrisWilliams-vm1do 4 ай бұрын

I just got this grinder with the diamond like burrs. My first high end grinder. Coming from an old OXO grinder, this thing is a tank. Super heavy and stable. I’m making pour over coffee and so far it’s pretty amazing.

@joshouyang4027 4 ай бұрын

Which kind adapter do you use for exhaust to standard 4 inch vent pipe?

@portakeeper 4 ай бұрын

Made my own to 3”

@samah713 4 ай бұрын

sweet cast lab 83mm are so squirly for espresso....youre absolutely right

@giankytaddy4332 4 ай бұрын

Ottimo video, ho appena acquistato un mara x costruita nel 2021, ma non riesco a montare il latte in tempi brevi, ci vogliono circa 60/80 minuti, il vapore non ha molta pressione in qualsiasi modo imposto la macchina; sapresti darmi informazioni? Grazie e complimenti

@Fearnlea 4 ай бұрын

Really helpful, thank you.

@andrecordero6958 5 ай бұрын

How is it ? What kind of data logger you choose ?

@portakeeper 3 ай бұрын

Kaleido comes with two options. Either their proprietary tablet, or certain models have bluetooth connectivity to Artisan.

@BPetiBP 5 ай бұрын

I bet that shimming was not enough, this is why you didn't show the result...

@portakeeper 3 ай бұрын

@PhotOle 5 ай бұрын

Great review.

@PhotOle 5 ай бұрын

I like how real your review is. Thank you.

@carrscoffee 5 ай бұрын

They tell you one to two for espresso but for espresso i actually use a 3 to 3½ on the Opus comes out perfect no sour at all and sweet on the end. I have a Legato machine. I want a df64 e or v tho and just use the opus gor my pour overs. I font know if thats the right. Hoice to make tho....

@rxonmymind8362 5 ай бұрын

Wish they would list the DB. I'll take quiet over speed.

@portakeeper 5 ай бұрын

It depends on RPM, beans, burrs, so many different things.

@ccoovvii 5 ай бұрын

Was it using stock burrs?

@portakeeper 3 ай бұрын

Stock DLC

@ciretose3000 5 ай бұрын

Thx for the nice review. Is it possible to set the temperature with the pressostat? I mean higher pressure, higher temperature for light roasted specialty coffee?

@portakeeper 3 ай бұрын

Yes, you can adjust the pressure, just not easily. Usually someone with something like a Scace Device will tune the pressurestat. On this machine, there was a black cover, followed by a yellow cover on the large pressurestat. There is a screw under those caps to adjust the pressure to allow higher/lower temp.

@ciretose3000 3 ай бұрын

@@portakeeper Thx for this detailed information.

@ciretose3000 3 ай бұрын

@@portakeeper Thx for this detailed information.

@nik0001-d6i 5 ай бұрын

Well, I know is QM but which Model?

@portakeeper 5 ай бұрын

Vetrano Evo 2b

@nik0001-d6i 5 ай бұрын

Wow!! What’s the brand name for that machine? ❤❤

@portakeeper 3 ай бұрын

Quick Mill Vetrano Evo 2B

@themodularmodular 5 ай бұрын

Oh man this looks great, if only it's 58.55 for tighter fit

@tymac277 5 ай бұрын

Has anyone else experience the bolt holes in the SSP burrs are deeper than in the DLC burrs? I ask because when installing the SSP burr the rotating portion of the grinder is locked because the bolts touch the bottom of the griding chamber lot allowing the bottom burr holder to rotate. Any idea if getting new bolts, shimming, or other way to correct this issue?

Ең жақсы KZbin

Пікірлер