Hi Seem that the antena N2135A obsolited, could you suggest an other type of antena for this application?

I dont understand why or how a scope could have limited accuracy in measuring pp voltage

Hi, could you cover the subject of scope slow sweep while capturing slow or non-periodic signals. Some capture signal from left to right, some - from right to left. E.g. Do DSO always capture from right to left? Is there a correct way to do it and what would be the difference? Wasn't able to find clarification anywhere online. Thanks...

Does this mean Keysight is ~0?

I had some fun with the VU meter I was wiring up to my audio compressor with this (prior to seeing this). I was poking around with a DMM and would redline the VU meter when trying to measure it's series resistance as the DC was flowing through it without the useual resistor that's put infront of it to calibrate it to usefully display audio level signals. I also had fun when soldering the replacement IC LEDs for it's backlight with blue ones, as my soldering iron outputs current at the tip (due to the heating coil inducing current in it), and every time I went to solder it the LEDs would light up magically without it being plugged into an obvious power source. xD

Inspector Poirot of vintage tech

So you can safely use a differential probe without having to worry about shorting out your oscilloscope ?

*Please scope i never have any and im not able to work with my electronics😢😢*

Wow.... it was amazing. Can u tell how to generate a signal with 30 mhz bandwidth.

Слава Украине!

For cars, visible lasers might be better. At least for parking and anything that requires knowing how far away something is.

Carrots were the explanation for airborne radar, not Chain Home. Chain Home were augumented by human observers.

look up the specifications, understand the measurement errors, and record the readings with uncertainty 😂

62 technically but most of my gear is just the cheapest stuff i could get my paws on.

Like that time I used a VNA as a RF signal generator.... I mean, its not a great idea, but if someone has stolen your RF signal generator, and you need to get the test done...

Great presentation!

Everyone has that one coworker that's blown a powerhead

This was actually good; he was right about one thing though. Nobody else on KZbin mentioned anything about a fire extinguisher or first aid kit.

can we use passive probe with 10x settings to reduce loading effects ?

thanks

The tiny Hand got me 😂

Man! You should be a professor.

Just get the mean of the 3

BS video! Is this cartoon?!!! where did you connect the noise source to? why didn't you take its noise into consideration?!!!

5:06 "a clean squarewave"???

How to change input impedance of 2000 series Dsox2014a input impedance from 1mohm to 50 ohm

Interesting. But that music sucks.

Great, and no annoying music background.

Why this guy keeps making funny faces?! Over-expression is an internet thing

my home outlets aren't grounded at all, how am I supposed to ground myself ???

These scopes are possibly the best that you can buy, I'd love to own one as a hobbyist, but the price range shocked me . I could have bought 2 very flash sports cars, paid off my mortgage & gone on a cruise instead.

Stephen Hawking nothing is perfect

Oh shit, it's a Bogdanoff. I'm going to need the QRD.

Question, how would we determine the number of cycles for the timing jitter?

Love the natural look .Will you marry me. We can name one kid signal and the other sample. How bout it?

great video

Finally, an explanation for the Scientology e-meter!

77 mph?! Seriously? The DeLorean had to go 88. Jeez

Dragging long cables over carpet! whoooo!

Having those tools probably cost a lot of money. I think i would just get the tool that i need as i need it. Then move along to the next one as i get into the hobby.

Waveform generator connect in pc with Lan cable with steps

Fiyatı ne kadar

Good informatioin but talk to fast.

I still don't believe it how come welding component leads is more reliable than soldering ?

Same as handshake problem.

Power supplies are heavy, filled with copper, iron core transformers, and a bunch of metal. So sticking them in the bottom of the rack above the UPS or power conditioner would make sense. Hopefully their heat gets pushed to the edges of the cabinet, avoiding how much convection occurs to the sensitive equipment that are higher up in the rack.

Good morning, thanks for this video. I think there is mistake in the formula. Explanation : P=U²/R -> U=sqrt(P*R). Knowing that ESR = DF/(2pifC) -> U=sqrt(P*DF/(2pifc)). In other words the d=DF=Dissipation factor should have been place on the top of the division and not under the disition. Roland.

You know when there's those purple phaseflex cables dangling in the background, they're up for some serious business hahaha

Keysight, send me a free hobbyist scope and i sign on my honor that i will get my third year degree in july

Instructions unclear. I'm gonna play games on my oscilloscope, pretend it was a computer