Great video

The Gorilla Glue is expensive. I'd use wax like in the old days.

I got my lyman turret all american in 1976, i love it, i have it set back on the bench just far enough to where the handle bumps he table top ot keep it from breaking over

I agree with the others really poor pratices snd shody work i wouldnt shoot anything he reloaded

sharpen that punch

Howdy from down the road in Grand Saline. Infact, I was in Gilmer some months ago at a Poultry show picking up a few hens. Thanks for sharing !!

Have you tried candlewax or beeswax to seal the shot card?

Mine did the same thing

I will visit !!

When using a hole punch, you should use the end grain of the wood, I use a short peace of 2X4 about 1 " thick, this will give you a much better cut as well is a lot easer on your punch. I have a set I use for leather mostly and they are well over 40 years old and still very sharp. Never had to sharpen them. Thanks for the very good video will have to find the first one. I have a large amount of 444 brass, so is nice to know.

Where would I find load data for to use the 444 marlin brass as 410.

You’re crimping a bullet that doesn’t have a cannelure! Your COL should place the bullet close to the lands. That ammo is far from being “match grade”.

A 7/16 hole punch is more precise.

new brass, after shot in a 410 need to be resized? or just reloaded?

Nicely done!

Thanks, very interesting and informative!

Great video and satisfying to watch

Did you try that in your rifle chamber too? If it fits

Thanks for a great vid, Eddy. Cool dude. I seek loading guidelines to try making metallic .410 shells out of .460 S&W brass, or possibly .454 Casull. I would think it would better fit a .410 chamber than .44-size brass, without fire-forming? I read an online article at American Handgunner where the man loaded .45 Colt shotshells without plastic capsules, using copper gas checks for wads. I think he used 6 gr. of Unique powder. I realize that .460 S&W brass would not be cheap. My objective is to create ammo that has less shot than a .410 shell, but more power than even a .22 Mag birdshot load, with greater shot size selection. They would be shot from my .410 break-barrels with chokes, and possibly my Rossi Brawler .45/.410 Mostly for snakes, rats or aerial targets. .22 LR birdshot costs 50 cents a round, empty plastic CCI shot capsules are 40 cents each (if you can find them), and CCI loaded .45 Colt shotshells are up to 3 bucks each. Thanks!

A very small mistake can mean a life or death situation !!! Keep you mind on what you doing !!! If looks or feels wrong closer attention is in order !!!

Any small shops do this ??? What's cost per 100 ?

Now add 45 cal.Heavy Cast Bullets with a Rifled Barrel ? An for the big n bad ... Could even go 50 cal ??? Even 8 gauge industrial ??? Wasn't a 6 gauge industrial once available ?

Thank you Sir.

How long do you cut the .223 brass too?

Hot glue seals overshot cards perfect, fast and cheap. Warm the stick with a lighter, dab on the top.

Just running across this channel, great informative video. Liked and subscribed. Thanks

use wax

I’d love to see that part three and how these worked for you.

I use clear silicone caulk to seal the overshot cards. Works great and is waterproof. Just get a small squeeze tube of it, and it will last for many loadings.

NICE THANK YOU

You didn't mention how much wad pressure you used.

Great ressource material. Thanks

Do you still need to debur?

gunbroker and gunshows are amazing for dies...legit half price a lot of times

Can't you use a hot glue gun? It drys a lot quicker.

What happened to part 3? You had my interest peaked.

That was a bit painful, but God Bless you Sir.

The old timers used bees wax from candles or talo to seal the tops of their reloads...simple and easy to clean out of the barrel when the time comes. Talo is best since it lubes ur barrel during the firing process but bee wax is a bit sticky and can be removed with a little heat.

I went with the Buchanan Precision Machine LNL Hand Press. kzbin.info/www/bejne/rnbTioSDmdOrfrs&pp=ygUeQnVjaGFuYW4uIFByZWNpc2lvbiBoYW5kIHByZXNz

Please, just tell us which and how much powder, over all length and bullet weight.

there has just got to be a better way to load brass cases

Thanks for postin ! I was thinkin I wanted brass shells for my 410. Now, I know how to get them ! Thanks Dad !

..I used those disc's for years until Lee introduced the adjustable measure.. whatta difference!!!

will these feed thru an ar style 410?

Well done, I have seen some important details, thanks and greetings from Germany

It looks like using that powder measure is a risk of charging a double. A lot safer to have a press charger. Even priming and not checking it would bother me on not seating right or even upside down.

Nice relaxing video I prefer using a hand priming tool but that’s just me, don’t matter really but I find if there’s an issue like an especially loose primer pocket you’re more likely to feel that difference with the hand tool. Enjoy your videos. This is not the sort of thing one should ever do in a hurry and you exemplify that

Wow new reloaders DO NOT follow this guy he is an accident waiting to happen disregard his flippiant attitude towards loads and powder volumes DAMN!

Best using a wad punch on a block end grain on.

You guys really didn't show anything. How do you adjust the cross hairs to to laser. You guys are lame.