You should be getting up to 9hrs on your XP50 before you need change batteries. I believe that's significantly longer than its main competitors (who give battery life for using all the spare batteries they supply with it). The XT50 is up to 8hrs, because of the larger sensor and display. Just remember battery performance in any product will be impacted to some extent by the outside temperature.

The LRF, battery and entire device are all covered by your warranty. If you're in the UK contact our service department - they'll be pleased to assist you: [email protected]

In the ballistics menu option you can control if you want to keep the range value on the screen / off the screen / it's position. The PIP stays on for a few seconds. My work-around to speed up turning it off is to tap the quick menu.

​@@thomasjacksltd How many seconds is a few, the 50 is10 long seconds in a hunt. So what you are saying is that the latest flagship scope has a workaround for a basic function, meaning it has the same FAULT as the 50.

@@paddymularkey Not at all - that's just me trying to be helpful. Be rest assured, Pulsar products go through extensive research, development and real user testing to create innovative products that perform to the highest level. And while they can't please everyone all of the time, they do listen to customer feedback.

@@thomasjacksltd I am a real user thanks, I asked a direct question, you did not answer it. Im quite sure you tested it. But from what you say it has the same fault with a workaround, not good on a flagship product. Again, when the PIP is turned off how long does the PIP stay on screen for before leaving a full screen with the hold over point still visible.

@@paddymularkey I make it 11.76 seconds. Pulsar have more real customers world-wide than every other producer of consumer thermal products. A fair few of them will have a view on how they would design the product for their particular needs but that wouldn't create the perfect solution for all. You've been heard and your comments have been noted.

Pulsar every time for long term reliability no matter what you throw at it, but watch our buyers guide, it might help you choose: kzbin.info/www/bejne/mXKUepWFnJh5ebssi=mJ6qcfkGgeokGa1c

We'll take that - thanks, it is pretty special! If you're looking for a that kind of mag there aren't many options out there with a thermal sensor of this capability.

Read this on what you actually get with NETD: pulsar-vision.co.uk/netd-vs-snetd-whats-the-difference/ When we field test products we like to show what they're capable of in real conditions, like 85% humidity at useful ranges (649yds, 241yds,104yds, 85yds, 67yds). Don't believe all the marketing claims you read from certain manufacturers. Just know that you get what you pay for.

@thomasjacksltd i don't claim it. I actually own one. Iray RH50 V2 It performs way better, like I said. The display quality on the xg60 is garbage compared to the RH50 V2. The sensor is way better than the xg60. You can do a quick search on the RH50 V2 and see for yourself it's much better quality for the money. Pulsar just needs to step up their thermal quality game. For the money, buy an Iray product.

​@@thomasjacksltdall good and well, the new 60 lenses have F1.1, loosing out at least 20 % on Netd of the core, regardless the software

​@@kees356 The NETD of the 'core' is not effected. That's a fixed measure of the quality of the sensor. And I believe Pulsar are the only manufacturer that publish the sensor NETD. Many others only publish the 'system NETD' which is manipulated by processing. And cheaper devices use cheaper components that rely more heavily on processing. While heavy processing can give you extra animal detail (in high humidity and rain) it negatively impacts battery life, information about the surroundings and image latency.

How about two?! kzbin.info/www/bejne/i3iXnWSvrK2ooM0si=medhXLk_DzXzaKo3

Thanks. More to come!

Simple: Although the XP has fewer pixels in it's thermal sensor they are larger and more sensitive to capturing thermal information, especially in high humidity (like we had on the test day). If you're choosing a thermal and that's important, look for a low NETD.

Cheers - we've more planned, just like we've done for the Axions and Mergers... You can see them all here: kzbin.info/aero/PLRgDspzcWF0iOUlkQMQOXHcSi7LHk7wAG

Pulsar publish the raw Sensor NETD, while many other manufacturers will only give you the 'system NETD.' ie The NETD value AFTER the thermal image has been processed. If that involves a lot of processing it will have a negative impact on other factors like image latency, detail across the whole image and battery life. Check for those things before you buy because... you get what you pay for.

thank you for explaining

@@verynice1192 You're welcome

This might help, if it's a connection problem: kzbin.info/www/bejne/fKKvc3-lZ6eFd68

No problem - And just to reassure you, that was my first ever attempt at it. I was really pleased at how tidy it was and how well it's lasted.

Here's a link to the Immersive Optics 5x selection guide - that indicates they'd all be good on an air rifle: immersive-scopes.co.uk/selection-guide/

Here's a link to the Immersive Optics 5x selection guide - that indicates they'd all be good on an air rifle: immersive-scopes.co.uk/selection-guide/

Hello, I see that a few hours ago you have posted another problem on the Axion XQ30 Pro Unboxing video comments. If you are in the UK please call our office on 01789 264100 or email [email protected]. If you are not in the UK please contact Pulsar directly.

The aim is to try to be as consistent as possible for each device in these MEGA tests, which is why I have them side-by-side, operating in identical conditions, looking at the same object at the same range. Everything is on white hot, No sensor amplification And on base magnification.

It's the sensor calibrating. Set it to automatic mode and it'll do it periodically (once every minute or three). And if that looks like it could coincide with a crucial moment; simply tap the power / calibration button beforehand and you'll get a clear minute or three before it needs to do it again.

No still no fix. Pulsar still cant see the problem. Things at Pulsar need fixing first i think.

The Axion XG35 compact would be ideal for birdwatching. Here's a short video doing exactly that on our other 'wildlife' channel: kzbin.info/www/bejne/h6SVonR4f7d9Y8ksi=Whzq4Uo7TLx7jach

@@thomasjacksltd thankyou for pointing me in the right direction 😊

@@ben19961 BTW we've another Matt Prior film to come (probably in the new year) where were filming, catching and ringing different bird species after dark with the help of a Pulsar thermal. Subscribe to our TJ Focus channel to make sure you don't miss it! youtube.com/@tj-focus?si=tPu3pYWBpKTj8YdF

@@thomasjacksltd I’ve just subscribed you guys are the best!

This link will help you choose the best scope... For bracketing you may want to opt for the Mildot, or extended mildot reticle: immersive-scopes.co.uk/selection-guide/ And here's a link to the user manual that gives some info of how you can estimate the range with the focus wheel and included stickers (see No4 Eyepiece & Focusing). efaidnbmnnnibpcajpcglclefindmkaj/immersive-scopes.co.uk/wp-content/uploads/2021/07/manual_en-op.pdf

Here's another video about the Krypton2 explaining it's optimised for scopes between 1.5x to 6.0x. There's lots of day and night footage in there for your to demonstrate what it looks like: kzbin.info/www/bejne/mGPbiWpvga6LitE

Had to google that - brilliant! Thanks for sharing

Check out our Merger Mega Tests comparing the Merger XQ35, with the XP50 and XL50: kzbin.info/www/bejne/rH3WeZyweJqNfNUsi=cbGw3kl_xCz1Tnzq There are 3 other Merger Mega Test, which you'll be able to find from this one, but also take a look at this comparing the XP35 with the XP50: kzbin.info/www/bejne/ap2wgH56Zd6iaLMsi=Ba9G7nTXbNTNen0C

If you mean the ranges, here you go: 4:20 Sheep/lambs @42m 4:26 Sheep/lambs @178m 4:43 Sheep/lambs @252m 4:55 House @450m

They both have the same number of pixels in their thermal sensors and same base mag, so the difference in these conditions, at close range is negligible , especially on the video output (less so through the lens). However, the bigger lens on the XP50 captures more thermal info, which you will notice at bigger ranges. And the XP50 will cope better in high humidity, mist, fog & rain because its sensor has larger pixels / the sensor is physically larger).

Definitely. All down to the high humidity on the day we filmed.

The interesting thing about this test was the high humidity, which will tend to favour a larger pixel / lower NETD XP50. So if you want the best tool for every weather, I'd be edging towards the XP50. But choose the XL50 if you're more fair weather / ideal conditions (with occasional wet/humid/foggy use), or if you're scanning big areas that'll favour the wider FOV, or want richer detail (for animals and the background... to help with spacial awareness and better quality videos). The extra pixels in the XL also tend to look better if you do a lot of digital zooming.

@@thomasjacksltd Thank you for explaining! Then it sounds like the XP50 would be the better choice for me. My main goal would be to find as much wildlife as I can in different circumstances. To try and figure out if I'm actually looking at something exciting the extra pixels would come in handy, but not as important as finding animals and beinig able to rule out non-wildlife objects. I will try them out both just to be sure which one gives me the best experience, but this kind of information helps a lot to make a decision.

@@naturebylennart You're very welcome. We also produce lots of quick guides on KZbin to help you get the most from your new thermal... from getting it set up to connecting your phone and tips on focusing... kzbin.info/www/bejne/j6mynIVsm5qIa5osi=xjoDctlUCPX0wYUI

Thanks. For anyone faced with the tough decision about which is the right thermal to buy we've done the same test for Mergers & Axions too! kzbin.info/aero/PLRgDspzcWF0iOUlkQMQOXHcSi7LHk7wAG

@thomasjacksltd I've had the Mergers from you guys and they are brilliant. Perfect for what I need in the field

Historically I would have opted for an alloy body given the choice, but the composite ABS moulding on the Telos has proved itself for nearly a couple of years now, and shares a lot of the same characteristics (like strength-to-weight ratio, shock absorption, heat dispersion), so there really isn't a lot in it. We've not had a Telos in the UK service centre that's been driven over yet, which either means people are better drivers now, or it's just as tough as the handful Helion's that we managed to repair after a fight with a car/truck/tractor!

The XT has 1.3 million pixels in its sensor. The XL has 786 thousand. The XT also has a much larger display, so it will deliver a better viewing experience. However, both are top end thermal binoculars, that out-perform the market in many regards, so choosing between them might be difficult until you try both for yourself, for whatever criteria you choose to prioritise (eg FOV, or Mag). I just want to add - hands up anyone who owned a Helion XP50 Pro and thought it couldn't be improved on? 🖐Keep on innovating Pulsar!

@@thomasjacksltd Yes the XT has more pixels but their spread over a wider area making the pixel size the same The FOV on the Merger XL50 is 24.6m ( 2.6x ) at 100m so 24,600 divided by 1024 sensor size is 24.02mm per pixel The FOV on the Merger XT50 is 30.7m ( 2.0x ) at 100m so 30,700 divided by 1280 sensor size is 23.98mm per pixel It is obvious there is no gain with the XT's over the XL's even if you look at the detection distance .... It hasn't increased ! I would have bought the new Pulsar XT's and upgraded had they not tried to con us , Most people with see the 1280 sensor and be fooled ... The new Hik Habrok 1280 sensor has better pixel density with each pixel being only 20mm so a real advantage .... Only for them to put a 25hz refresh rate on their flagship unit ... Crazy !

@@thomasjacksltd KZbin didn't post my reply ..... The FOV on the Merger XL50 is 24.6m ( 2.5x ) at 100m so 24,600 divided by 1024 sensor size is 24.02mm The FOV on the Merger XT50 is 30.7m ( 2.0x ) at 100m so 30,700 divided by 1280 sensor size is 23.98mm.... NO gain at all !

​@@OSOK7 That's the effective width of one pixel at 100m at the base mag. The main advantage of the XT is the overall extra width in FOV - so you see more on the periphery. Also if you digitally zoom the XT to 2.5x (so they're at the same magnification) you're looking at 1.05m pixels on the XT, versus 786k on the XL. If your XL is doing the job you need it to do, stick with it - It'll serve you well for years. For anyone in the market to buy - they have a choice and the extra FOV on the XT might be enough to seal it. (So we're both not doubling effort answering the same point - I'll remove the identical query on our TJ Focus channel)

The rubber section of the eye piece can be teased off with your fingertips (Avoid using any tools, or too much force). Do it over a clear service, just in case the the metal retaining ring slips off. (Push it back on to the body if it does). When fitting the rubber eye cup - orientate it to simply push over the lugs.

@@thomasjacksltd thanks for the quick answer! still not able to do that, it sits really tight. Maybe you could show it in any of your future materials? :-)

​@@cyrylboryczko6853 I might do that! In the meantime - work your way around the circumference of the eyecup with your nails until you find an edge that lifts, then prise it off. Good luck

That sounds like a Helion?? I'd recommend you delete the app and start again. Follow this step-by-step guide and double check you have the correct version of the app. You need this one: Pulsar Stream Vision (MAKE SURE IT DOES NOT HAVE A No.2 on the app icon) kzbin.info/www/bejne/oHuteYakgql3o5Isi=G4GMNMS0xxK4O7yX

@@thomasjacksltdthermion xp38. Uses Steam Light 1, I’ve deleted and reinstalled several times. Then I have reset Thermian and cleared memory several times. iPhone 12, iOS 17.7.1. It says it has weak security and then just thinks about connecting and never connects.

@@BoarsAllDay Try connecting your device again, then in your phone settings... - Click on your Thermion's WiFi network - Click the ( i ) icon - Click 'Forget This Network.' Once you've removed the Thermion's WiFi network, reconnect it to your phone. You will need to re-enter the password.

Pixfra are about to launch an LRF equipped ARC that's worth keeping an eye out for in the near future. I've not heard any similar plans for the Mile 2.

Hi mate where have you got it listed

@ben19961 i haven't, I've lost the foxing permission n no longer need it.

How much, nz dollar?

Just over 1800

@@rogerparker9228 is that how much your wanting for it or how much u brought it for new?

Don't worry -A factory reset will still keep all your Zeroing profiles. You will not lose them. How far do you get with connecting your Thermion?

@@thomasjacksltd I only see the Thermion wifi on my iPhone/iPad and it tries to connect - but does not progress. just sits with swirling icon.

I have the same issue. I have tried everything

@@murraysingleton6530 I'd recommend you delete the app and start again. Follow this step-by-step guide and double check you have the correct version of the app. You need this one: Pulsar Stream Vision 2 (It should have a No.2 on the app icon) kzbin.info/www/bejne/oHuteYakgql3o5Isi=G4GMNMS0xxK4O7yX

Here are some more tips if you're having problems: kzbin.info/www/bejne/fKKvc3-lZ6eFd68 Good luck

I'll post some more videos for you, to help with your dreams! 😴

@@thomasjacksltd Lmao thank you 😌

Do a factory reset on your device. You'll find it under the COG options within the main menu. Also it would be worth selecting the stronger signal of 5GHz in the WiFi options.

​@@thomasjacksltd hi again, and thank you for response! In my particular case I found out that it seemed to switch off WiFi automatically while under 15-10% of battery, so switched off - removed the battery and recharged it fully direct with cable. Worked perfectly without reset to factory and format 😊👌

Or, if it was a "bug" or glitch, connecting it to laptop as a hard drive to access media, could potentially solve it as well 👍

​@@jellybeanjagger6775 Ah yes it will do that when the Wifi is on because of the additional power that needs. If you turn the WiFi off it'll keep going... or as you found - stick in a spare battery. Glad you managed to worked it out.

Either will do the job you need it to do. The choice between these two will be cost versus size.

Why can't I buy them from your website!!? Can't find the add to cart option😢​@@thomasjacksltd

Neither, they're Immersive Optics, who originated the idea and do make scopes for some other brands.

We're the UK distributor. You can find a retailer here: thomasjacks.co.uk/find-a-retailer/

The Black area of each target is 18cm in diameter

I agree. Leaving the price to the side, the <18 mK NETD on the Hikmicro compared to <40 mK on the Pulsar is a huge difference, and that is without mentioning the extra features the Hikmicro has. The Pulsar feels incredibly underwhelming compared to the Hikmicro. You could argue that Hikmicro is a Chinese company and therefore lacks in quality, but that doesn't justify the price of Pulsar in my opinion. I would really like to see a comparison between these two thermal cameras to really show its differences.

We can't find anything to indicate the Habrok has image stabilisation: It's not in the spec sheet for the product, it's not on Hikmicros website, I also just watched a few reviews for it and no one mentions it. Yes there's a difference in price but if you want the best thermal... you get what you pay for.

​@@TFSimple There's a big difference: Habrok: <18mk is system NETD (ie The OUTPUT, after a lot of processing - which runs the battery down quicker and makes the image lag... That and the 25Hz refresh rate. Merger: <40mK is the sensor NETD (ie The INPUT, before any processing. And because it's a high quality French sensor it doesn't need as a much processing, which improves battery life and creates a better image... That and it's 50Hz refresh rate! A side by side comparison would show you. Pricewise in the UK £5590 vs £4800.

BillyYoung i have been to a Demo recently in the SW of england and looked though both of these units and others, as I was questioning the same, as I am looking to upgrade from my Accoldaes XP50s, but there is a Big Diference between the units Habrok pros and Mergers, I firstly looked at the habrok, as there stand was as less busy at the time, yes the habroks feel like a normal pair of binos and yes it has Thermal, day, night, etc, But boy are they heavy! I thought what a unit to have all these features in... BUT! when you actually look into the specs of the Habrok, they are not as superior to the Mergers, despite it saying so on paper, the Day channel was very laggy and seem to have a delay when scanning from left to right this was the same on the Thermal channel as well as giving a very cartoony image also, it almost seems like the habroks are running to hard by software or something and cant keep up with it, if you scan to quick, it would make you feel kind of sea sick. if you stood still looking over one area they work great. Whereas the Mergers XT50s, yes it is only a Thermal with LRF, which is a downside for most, but the thermal image is much shaprer and more of a life like image, over a cartoony slow image from HIK, I just don't understand that on paper the habroks are better than the Pulsar, but when you get them in you hands Pulsar still seem to have the edge in my opinion, id be interested to know where both Pulsar and Hik get there specs from, as something doesn't add up to me, can anyone else share any light?

@@Countryoutdoorsmankeith Great tip to test them out for yourself - we've loads of demo's planned, where you can talk to our experts too: thomasjacks.co.uk/events-calendar/#1707305968742-edef5ee3-4272

No. But it's easy to swap on a spare Pulsar battery if you own one... or you could plug in a small power bank (if you can gaffa-tape it somewhere safe / where it will cope with the recoil of your rifle)

We're gonna need a bigger rig! 🦈

I can think about that for a future video (and you've now got 3 options for that XG sensor: 30mm, 35mm and 50mm) . On paper a bigger lens will deliver more info to the sensor, so the image will be improved, and amplified by the bigger base mag on the Telos. But the Telos does have a narrower field of view and it is a bit bulkier. There are quite a few things there to weigh up, so it's all down to which features you want to prioritise.

@@thomasjacksltd Thank you! If you have the time, i was wondering on your personal toughts on the XG35 / XG50 vs the Hikmicro CQ35L or CQ50L. Mutch better mk values on the hik, but less battery power. Its tempting. But im afraid the experience is less than pulsar, even though the specs looks better.

​@@Andreas-xm8it I believe the difference in battery power is down to the extra image processing the Chinese made Hikmicro has to do. Pulsar use high quality French Lynred sensors: It does make them more expensive... but explains why they hold their value. Find a retailer that sells both / or attend an event where you can test them for yourself (as close as possible to the kind of scenario that you plan to use them in). This guide might help you choose: kzbin.info/www/bejne/mXKUepWFnJh5ebssi=_Yk8Q50iK0_HU4aB