Auto Helping Hands

Пікірлер

@freemaninegbedion8283 17 күн бұрын

Nice one

@Autohelpinghands 17 күн бұрын

Thanks for watching

@rajithalakshan4815 21 күн бұрын

Is that Additional wire is necessary to ECU? Because in alli express they are not providing it. I have 2011 prius 3rd.

@Autohelpinghands 21 күн бұрын

If you buy from Ali express, they will send you two wires, one for ECU and the other for ground(-).

@dimashdude Ай бұрын

Thanks great video

@Autohelpinghands Ай бұрын

Thanks for watching

@19Ability Ай бұрын

Camera not showing some stuffs though i cant see how you inserted the wires into the other side . If you can explain i will be glad😊

@Autohelpinghands Ай бұрын

ROUTE THE BROWN CRUISE ECM HARNESS TO THE ECM BEHIND THE REMOVED LOWER INSTRUMENT PANEL. LOCATE GRAY CONNECTOR G58 (TOP) OF THE ECM. BE SURE TO PRESS IN TABS ON BOTH SIDES TO PUSH UP TERMINAL RETAINER AT THE CENTER OF CONNECTOR. INSERT ECM TERMINAL FROM THE BROWN (59B-05877) ECM HARNESS INTO PIN 22

@19Ability Ай бұрын

@@Autohelpinghandstoo many terminology sir thanks for the response am not so good with this term ECM can you do another video on how to link or from the part where you connected it well to the other end that’s where I got confused

@pinoypalaboy1016 Ай бұрын

Thank you brother.

@Autohelpinghands Ай бұрын

You are welcome. Thanks for watching the videos.

@SRoach-vg2ke Ай бұрын

It totally worked Thank you, now is there a way to change the rest to English

@Autohelpinghands Ай бұрын

Thank you very much. I would appreciate it if you would like to subscribe to my channel.👍

@sabh1313 Ай бұрын

Hi thanks. I need to replace my odometer display glass. Part is not expensive but i dont know how to change it. Where are you located? I am un Toronto.

@Autohelpinghands Ай бұрын

I am not from Canada. But if you see the video, there are only two connectors, and after removing these two connectors, your odometer will be out and you can replace the whole part, or you can replace the glass as well.

@malikalimushtaq Ай бұрын

Can you please tell me about 2015 which pin it needs to go in ecu? I tried one you told in this video but it didn’t work.

@Autohelpinghands Ай бұрын

Prius 2015 have different connections.

@malikalimushtaq Ай бұрын

Can you please explain ecu connection for 2015 I will really appreciate that. Thanks

@Autohelpinghands Ай бұрын

ROUTE THE BROWN CRUISE ECM HARNESS TO THE ECM BEHIND THE REMOVED LOWER INSTRUMENT PANEL. LOCATE GRAY CONNECTOR G57 (2ND FROM TOP) OF THE ECM. FIGURE 16. BE SURE TO PRESS IN TABS ON BOTH SIDES TO PUSH UP TERMINAL RETAINER AT THE CENTER OF CON- NECTOR. FIGURE 17. INSERT ECM TERMINAL FROM THE BROWN (59B-05877) ECM HARNESS INTO PIN 28 (CRUISE CIRCUIT) OF CONNECTOR G@malikalimushtaq

@malikalimushtaq Ай бұрын

@@Autohelpinghands thanks for your reply is there any way I can contact you directly? Thanks

@neilsonlaigo8774 2 ай бұрын

How about the language? How to set in english?

@Autohelpinghands 2 ай бұрын

English language is not available for this model

@SukhchainSingh-dx7cp 2 ай бұрын

Hey bro can i get your contact number

@SukhchainSingh-dx7cp 2 ай бұрын

Big support ❤

@Autohelpinghands 2 ай бұрын

You are welcome

@bruzenmbongwa2496 2 ай бұрын

Perfect, it works thank you very much👍

@Autohelpinghands 2 ай бұрын

Thank you very much. Subscribe plz

@XELASK82 2 ай бұрын

Is working?

@Autohelpinghands 2 ай бұрын

Yes

@XELASK82 2 ай бұрын

@@Autohelpinghands unfortunately i have another model, rz09. I think in my model is not possible

@Philo_Boy 2 ай бұрын

the camera of My Axio Hybrid Fielder model 201is not working. Can anyone help me. When I switched to reverse gear, the camera doesn't work. May be it is not connected with screen. Help please

@Autohelpinghands 2 ай бұрын

What is the model no of your screen

@marceld6061 2 ай бұрын

The bottom "button" you pressed at 1:17 is to enter the DEMO mode (as if it was on display in a store) Press the upper button for 'Confirmation' It also says: "After running for a while and the initial learning of the sensor is over, this screen will not be displayed"

@Autohelpinghands 2 ай бұрын

Thanks

@arthurtee8113 3 ай бұрын

Is there a way to reset using buttons or micro hole?

@Autohelpinghands 3 ай бұрын

No micro hole to reset, but you can do factory reset in setting call " initial status "

@arthurtee8113 3 ай бұрын

@@Autohelpinghands Thanks...unfortunately my screen is blank

@soseductiveandsexy 21 күн бұрын

@safwan2541 hi will the factory reset allow the language to change to english

@alinadi100 3 ай бұрын

I have 2012 toyota prius T3. Will it work if I follow your video?

@Autohelpinghands 3 ай бұрын

Yes definitely

@ErhanDilsizoglu 3 ай бұрын

Bro stop that background music. Really can't hear anything...

@Autohelpinghands 3 ай бұрын

kzbin.info/www/bejne/jp6Yf4yNaLh0m80si=JjFDAt1Z-k8xXsTk

@diy-ft7js 3 ай бұрын

What are the part numbers to buy?

@Autohelpinghands 3 ай бұрын

You can find it from Aliexpress or Amazon.

@19Ability Ай бұрын

Give us a link please am in the UK I want to fix this stuff my self

@kakloloful 3 ай бұрын

Bro your video would have been more informative if you could have edited a little bit...

@Autohelpinghands 3 ай бұрын

Thank you for your suggestion.

@kakloloful 2 ай бұрын

@@Autohelpinghands Sir i installed my cruise control in Toyota Prius 2011 taking lead from your video. one suggestion please, that i routed the wire from L6 till L52 behind front pedestal instead of removing panels from front which seemed more secure and safe. The kit "Steering Wheel Cruise Control Switch 84632-34011 with Cover 45186-47030-C0" i ordered cost me PKR 3500 on Daraz and it worked very well.

@INAVEL77 3 ай бұрын

I changed battery and it resseted , now i havenot code, how can i get me code to use this?

@Autohelpinghands 3 ай бұрын

Sorry to hear that, but I am not selling code. Thanks

@nealdacosta6763 4 ай бұрын

I need some help please 🙏 the option that you went on am not seeing it on mine

@Autohelpinghands 4 ай бұрын

Can you write the model no because the English language option is not in everyone.

@chisepomupwaya5112 4 ай бұрын

Avic-rz06

@chisepomupwaya5112 4 ай бұрын

@@Autohelpinghands carrozzeria Avic-rz06

@soseductiveandsexy 21 күн бұрын

My model is avic-rz09

@nazarnazarbaloch4654 4 ай бұрын

Sir Can you help me ❤

@Autohelpinghands 4 ай бұрын

What help you looking for?

@nazarnazarbaloch4654 4 ай бұрын

Can you help me

@Autohelpinghands 4 ай бұрын

What help you required

@tahaalmadani5823 4 ай бұрын

What cable do we need for connection Where can we buy it What are the specifications of that cable

@Autohelpinghands 4 ай бұрын

You can buy it from Amazon or Ali express

@tahaalmadani5823 4 ай бұрын

Will any other wire work from other harnesses

@ranahamzaakram2902 5 ай бұрын

Hi brother can you tell me why you removed panel..?

@Autohelpinghands 5 ай бұрын

You need to remove the Panel for tie up properly the cruise control cable which will be connected to Car ECU.

@WellspringJapan 5 ай бұрын

I did it Toyota Noah hybrid 2014

@Autohelpinghands 5 ай бұрын

Thank you for watching video

@WellspringJapan 5 ай бұрын

THANK YOU !!!

@Autohelpinghands 5 ай бұрын

You welcome

@mome4887 6 ай бұрын

At first you should have air blowing the working area to clean up dust before you disassembled coils/spark plugs and it is necessary to torque the new spark plugs to 13 or 14 ft-lbs.

@Autohelpinghands 6 ай бұрын

Yes you are Wright. If don't have air so just clean it.

@rogelioandersen5842 4 ай бұрын

The OEM spark plugs, I believe are like the rest of all Toyota four-cylinder engines, 18 foot pounds torque. It's always best to double check, it is also best not to use any anti-seize. The 13 or 14 pound rating is if you dare use anti-seize. OEM spark plugs are treated with a shiny silver coating that does not require anti-seize.

@Muscleman-You-know-who-else 6 ай бұрын

Is this identical with NHZN W60G?

@Autohelpinghands 6 ай бұрын

No it will be different way to get the option for back camera settings.

@amranmahmood 6 ай бұрын

Are you from Uk. Where. I want to install in my prius 2013..can you tell me prize for equipment

@Autohelpinghands 6 ай бұрын

No I m not from UK

@shawnkelly7360 6 ай бұрын

What are the bolts holding the air bag in place? Or is it clips

@Autohelpinghands 6 ай бұрын

It's just Push in clips.

@emanuelbale6298 7 ай бұрын

Interesting!

@Autohelpinghands 7 ай бұрын

Thanks

@wilbertclarke9725 7 ай бұрын

How do i get the code to unlock this ERC CC200600A26EE48D on the NSZT-W62G toyota car radio?

@Autohelpinghands 7 ай бұрын

Try it 6F066634

@wilbertclarke9725 7 ай бұрын

@@Autohelpinghands Thank you so much the ERC decode works.

@emmanueliorgyer 8 ай бұрын

Ur explanation is very poor u dont show people what you re doing how do you want them to understand

@Autohelpinghands 8 ай бұрын

I am just explaining that after these hybrid cars batteries dead when your car windows are not working with master switch and you need to reset all the windows to work normal. That's all what I try to explain it. So if you didn't understand, watch it again instead of complaining. Thanks

@hirwahabakaramojules9031 5 ай бұрын

Just make a good video and stop being a cry baby

@m.d4460 8 ай бұрын

Hi there, what headunit do you have?

@Autohelpinghands 8 ай бұрын

Android after market

@m.d4460 8 ай бұрын

@@Autohelpinghands ali express? Id like the same model.

@waithash2 10 ай бұрын

I need your help on a Toyota Allion 2016, RADIO model is NSCP-W64?

@Autohelpinghands 10 ай бұрын

Can you explain it??

@waithash2 10 ай бұрын

@@Autohelpinghands yesterday, I tried to apply the steps you have explained in the video to activate the reverse Camera Lines on NSCP-W64? (Toyota Allion) , but It didn't work. How can you help?

@shaniquemarsh807 10 ай бұрын

This really helped me after my battery got replaced and everthing got reset. Thank you

@Autohelpinghands 10 ай бұрын

Thank you so much

@rajsharma155 10 ай бұрын

Where is your address please?

@robduthie2979 11 ай бұрын

Test and works on 2012 Prius Phev OK, the plug wiring had a few more wires in it, as long as it is in the same position it will work OK, Earth wire not required when supplied with the Ali express kit. as the G5 plug has a earth already wired into. The G58 plug will vary between models with different wiring as long as it is in pin 22 it will work.

@Autohelpinghands 11 ай бұрын

Yes you Don't need earth wire. G58 plug have 35 pins and for 2015 using different pin in ecu.

@tahaalmadani5823 4 ай бұрын

Why do we need earth wire? What is its function

@19Ability Ай бұрын

What about Prius 2010

@robduthie2979 Ай бұрын

@@19Ability Not sure

@bestislamicshortclip5761 11 ай бұрын

How to set language

@Autohelpinghands 11 ай бұрын

No option for English

@LeoTarachuk 11 ай бұрын

muito obrigado pelo video! Amanhã tentarei no meu Prius aqui no Brasil

@Autohelpinghands 11 ай бұрын

Thank you so much for watching the video. Kindly like and subscribe to my channel as well.

@genibelortaja6480 11 ай бұрын

Thank you very good explaining

@Autohelpinghands 11 ай бұрын

Glad you liked it

@freemaninegbedion8283 17 күн бұрын

@@Autohelpinghands yes...I just did mine

@tungaagii3374 Жыл бұрын

My car music is like this.please help block

@Autohelpinghands Жыл бұрын

Hi How may I can help you.

@smerffn Жыл бұрын

Thank you so much you are a legend. That plug from the camera in the boot was untraceable, I couldn't find the camera wires at the 20 pin plug either. Thank you thank you

@Autohelpinghands Жыл бұрын

Thank you so much. Kindly like and subscribe channel.

@laurelwright6385 7 ай бұрын

I am still unclear from the video. Did he intercept the wires in the kick panel and which wires? Why not trace them to one of the connectors behind the head unit?

@muigwamichael9837 Жыл бұрын

What is the sign for toyota isis?

@Autohelpinghands Жыл бұрын

@muigwamichael9837 Жыл бұрын

@@Autohelpinghands am asking about the Japanese sign/name for Toyota Isis. I've tried to look for it in the options but can't tell. I am unable to proceed from the point of choosing vehicle model.

@lameckndege Жыл бұрын

I have the same radio model NHZD-W62G fitted in Toyota Harrier but trying pressing the Map button thrice in quick succession while turning on and off my car headlights hasn't worked yet...please help 😢

@Autohelpinghands Жыл бұрын

Press and hold Map button and same time you need to trun on and off parking lights 3 time. It's not headlight just parking lights.

@lameckndege Жыл бұрын

Thank you so much it worked 🎉 Any hack for language change?

@adafiachannel9226 Жыл бұрын

Can i ask something? Why I cant reach the menu after press the MAP button? TQ for your reply.

@Autohelpinghands Жыл бұрын

If you have same model radio, then do same step as I show you in the video. you need to press map button and same time you need to turned on and off your car headlights.

@wilcovanamersfoort6744 Жыл бұрын

Are you using an OEM reverse camera or aftermarket? My understanding is that OEM does required 5V but your mentioning 12V as power to your camera.

@Autohelpinghands Жыл бұрын

You can use any camera after market or OEM both are using 12v so there is not any problem at all. OEM camera have direct 12v and switching from Radio and after market camera switching from reverse signal

@wilcovanamersfoort6744 Жыл бұрын

@Auto Helping Hands this is incorrect as most OEM reverse cameras have 6V as input. If you use 12V the camera will not last long.

@UseLess-zu3te Жыл бұрын

Hi ,is It possible to change the language on this model?

@Autohelpinghands Жыл бұрын

Hi Thank you very much. But its not possible to change language in this series.

Ең жақсы KZbin

Пікірлер