Hi, I watch a lot of international Movies and TV shows with English subtitles. Some of my favourites are Korean :) Your English is much better than my Korean. It really depends. It's a personal subjective thing since this is just a hobby after all. A few things to consider before doing this: 1. Cost - can you get these cables in your country at a reasonable cost? (from CableMod website, Local computer shops, Amazon, Aliexpress ...) 2. Make sure to get genuine cables or really good high rated alternatives! Make sure to get the right cables for your PSU - Power Supply Unit and computer system. They are PSU specific, do not mix and match them. 3. Potential defects, system malfunction and failures - adding any new part or changing out your system might cause something wrong to happen. 4. If the cables are defective and do not work, then can you get a refund and / or replacement quickly? 5. Time - it takes time and effort to do. Are you using your computer for work and can your system be down for a few hours in order to do this? It was worth the effort for me since I could get the full cable package at the time I did this. However, the funny thing is, a year later my Corsair HX1000 PSU died. I have had a dead Corsair PSU in the past in a completely different system so I am not lucky with Corsair PSUs. I sent in the dead Corsair HX1000i PSU for a warranty replacement but needed my system back up and running quickly to get work done. So I bought a new EVGA SuperNova Titanium 850 T2 PSU instead. Well these cables no longer work since the cables are PSU specific - cannot work with the EVGA. Will only work with certain specific Corsair PSU series. I had to use the stiff ugly cables that came with my new EVGA PSU. Corsair did eventually send a warranty replacement for the dead PSU. A brand new HX1000i. So now I have it and the CableMods sitting here not being used. I don't have the time to pull my system down right now and might just sell the new HX1000i PSU and CableMod cables. Haven't decided yet.

@@Rob.C Howdy feller, sorry for the late response. I purchased the Pro ModMesh Kit from CableMod referring to your opinion and have been using it satisfactorily so far. Thank you so much for answering me in detail. Lastly, I'm very happy to hear that you like Korean movies. I'm sure you've seen "Old Boy," but if you haven't, I highly recommend it!

Click link in the description under video. ModeMesh is UV reactive - glows in case lighting. Looks more vibrant to me. Happy with the ModMesh for my system.

Thanks, glad you enjoyed it!

Don't know if this will help - are you using Bluetooth? I use the USB C cable with mine. Have you updated all your drivers including the Bluetooth driver? Also update inside the Davinci Resolve editor. Open DR ,then open a project, can be a new blank; one then click on menu Help > Davinci Controls Panels Setup. Then click in the Speed Editor Icon or other smaller icons. DR should auto show you the latest driver for it and you can install it from there. The latest version I am showing is Version 1.4.4, Build b13612e5. (Some Bluetooth hardware on various systems / desktop / laptops etc can be spotty.)

KZbin auto generates subtitles - click the CC under the video. You can slow down or speed up the video by clicking on the Gear icon then Playback Speed. It's funny you mention non native speakers yet somehow use an old English swear phrase... ahah

Hi Michael, I was a long time Premiere Pro user. The switch to Davinci Resolve took a while and the learning curve at first was very steep for me. Learning about nodes and really getting to grips with the dedicated color page took a lot of patience until one day it finally clicked and it was an incredible light bulb moment. Thankfully there are a lot of really good how to vids. and some incredibly talented content creators out there whom I was able to learn from along the way.

I use it physically plugged into my PC with the usb-c cable. I tested the Bluetooth a while ago by turning on the Bluetooth setting on my PC and then starting up Davinci Resolve. Once the Speed Editor detected that Davinci Resolve was running it automatically paired with DR and started working.

This is so unfortunate isn't it? I do hope they bring it back in the future.

Thank you! I arrived just as the presentation was starting. So was not able to get her name. They created some very beautiful pieces. We bought and took home different coloured rolls of the alpaca wool and they are so very soft. When knitted into items that can be worn, they feel very nice.

@@Rob.C oh thanks for answering by the way!!

I have stock clocks for the CPU. See the CPU benchmarking / Thermal paste and CPU Cooler install vid if you haven't already seen it. kzbin.info/www/bejne/m5KugX5udpuCosk The 5950X hits 5Ghz on some cores when it needs to. Just was not worth the extra heat and system stress for only a few extra fps in games. I also need a very stable system for long hours of work and rendering so left it at stock clocks.

I did not know this was discontinued. That's too bad, it's a really good unit. I see Trutone Electronics in Ontario Canada currently still advertising it. (Not sure if they still have any stock left.) Crutchfield US and Canada not carrying it anymore. I did a quick search and there is a current listing on Kijiji Toronto for one. Looks like it's in really good condition too - only missing the glass center shelf. Keep an eye out for second hand sales, might get lucky that way. On a side note: If I had to buy another TV stand in the future, I'd just build one myself with wheels similar to this unit. It might not look as nice - but it will just as functional.

@@Rob.C It was discontinued as of December 2021. Any stock would probably be hard to find. I can probably find a gently used one, but then I'm taking a chance. There are not too many units that have hidden wheels. I like that feature alot.

@@Rob.CI wanted one a few years ago but it was out of my budget. Now that I want one it’s discontinued. 😢

Thanks, glad you enjoyed it. The majority of viewers will just look without leaving a comment. It's all good. As long as someone learns something of value then that's quite alright. :) Agreed on the cultural aspects. Lots of things happening including the changing climate that are affecting the indigenous people are over the planet. Looking at the history of South America, the effects of the past are still very strong and being felt today. Not an easy life at all. Take care. Rob.

Heh...

Try checking the main CableMod site: store.cablemod.com/ Also sometimes online sites like Amazon sell cables that you can use. Just make sure to use the designated cable(s) specific to your PSU. Do not mix and match from other PSU manufacturers. The internal wiring can be different and cause issues with your PC.

You are absolutely correct. Never mix and match cables from different PSUs! I realized the mistake I made saying that and added a note in the description and stickied comment: "Note always use specific cables for your PSU. Do not mix and match! Corsair PSU cables will not work on EVGA or Seasonic PSUs and so on. Mixing and matching can damage your system."

Hi, I feel your pain. Many times I purchased something only to find it go on sale or discount soon after. (Kinda like buying a stock - as soon as you buy it it drops.) I usually ask if there is a discount or a sale coming up before I buy something online. Usually they are good and offer a discount when I ask. One time I asked before purchasing an expensive piece of sound kit. I got a reply saying since it was so new that they weren't offering any sales / discount. Well a couple weeks later after I bought it it went on sale for 25% off. Argh - yeah I was not too happy about that one.

Agreed. It takes a bit of learning but it's amazing to use especially when quickly laying out clips in the Cut page. It becomes intuitive and so much faster to do rough edits in the Cut page and then fine tune them in the Edit page. I tried using a shorter TKL type keyboard that had the arrow keys before. I find I actually need the number pad when I am doing other work with a lot of numbers input. In the Edit page I use a combination keyboard, mouse and Speed Editor; depending on what needs to get done the quickest most intuitive, efficient way possible.

If 'I'm Graham from Blackmagic Design' doesnt give you a huge dopamine rush you cant be helped man

Thanks David. Same to you. Kitty - Raven, is doing well. Especially at 3 - 4 am in the morning when she likes to run around meowing and playing with her toys. Then she settles down to a nice snuggle afterwards. :)

Yes, individually.

Haha... Hey now, better to zoom in and see things clearer! :) My trusty old Sony AX100 is still kicking and my main go to camera. I find recording in 4K and then editing it to 1080p is so much clearer in terms of PQ when viewed afterwards on a large screen / monitor.