Extremely well executed video. Step by step. Measured descriptions that followed each step and you logic. You took it through to the end and voila it works. A technical work of art my friend. Thank you!

I have 2014 hp envy 15 beatsaudio which is very similar to this one. The maintenance for this laptop is painful. Ram slots are under the motherboard so you have to remove it as well. Keyboard is "welded" in the plastic, when i exchanged for a new one, my laptop got some kind of problem that i couldn't place my phone near it or it would just flicker the video.

Help ..my 99 ranger had this problem..showed hubby your video he had it done in 15 minutes..I left to go to store..NOW MY WINDOWS DONT WORK..ANY SUGGESTIONS?? ANYONE ??

It's dangerous ford is unintentional trying to kill people by these bells and buzers ,it's distracting.

its an excellent video. would plz let me know what is cable responsible for the power light only and finger sensor reader light on keyboard bcz i opened my laptop and after that light is not turning on but functioning properly both poer button and finger sensor?

Wow, this has been archived on KZbin for 8 years now. Good thing I found it as I was going crazy trying to take the back off of an HP Pavilion 14. There sure are a bunch of hidden screws! About my only criticism is that the video did not conclude with the re-installation of the cover. But I'm sure I can get it back on now that I know how to take it off.

I popped mine off with a flat head screw driver😂😂

About to do this and appreciate the video!!! My issue is my bike doesn’t like to start after about 30min or so of riding and then I go to fill up and then it starts acting all stupid on me and doesn’t like to start back up. This will hopefully make all the annoyance disappear.

Does this PC have a slot to add an extra storage...? Or swapping out is the only option

Perfection. Thanks for the detailed video. Took me all five to ten minutes to take care of the problem. #BlessedSilence

What I want is to fix this chime on my 1999 Mazda B3000 SX not to take it out. The problem is that the chime doesn't work when the key is on the ignition switch with the door is open and when the ignition switch is in the on position.The chime basically don't work and not make the noise. The other ones work except the sestbelt one. If someone can help please respond

Tnks

The door buzzer is 1 wire attached to a flat piece of metal that is on the outside of your key switch. It's grounding out just pull it out. Lol

I pulled my module and I don't see a buzzer 😢 2008 Ford Ranger Fx4

i just did a door latch swap on my truck because the used door I swapped in was from a different year and the switch was a different style connector, so I do have a functioning door chime when the key is in the ignition and door open or closed but I got a courtesy light issue to figure out now.

Do you mean that we are not supposed to put the wifi antenna behind the metallic foil to prevent signal loss?

Well done .. liked.. I have detached the flat metal wifi antenna from my HP laptop. If I wind the antenna with some tiny copper coils before putting it back, would it make any difference in the signal reception??

You are THE man! Many thanks, better than HP advisors and designers

Yes my 07 f450 has the same chime this the closest ive come to ending this annoying chime seems that ford engineers think we re to stupid to jnow if our door is open

Great video! I just have one question is it support M.2 and nvme or it's only SSD 2.5 inches??

I bought the 1/16 flat head recommended. Did not fit, any other ideas?!?!

You can pull that hose right out of the air box and just seal it off. And why do you need to remove the pressure release valve?

Oh my god, it us so easy to pull those clamps off took me 2 minumarbles less.

For 03 explorer owners the chime may be in the gauge panel board.

Hello sir my hp envy 15 213tx has some strange issue. I pushed power button to start but it started on and off auromatically. I can hear the click sound like we do in force shutdown by pressing power 5 secs. Some times i let power on/off goes on, it starts and goes in automatic repair but after some rime gives blue screen some kernal error(every time different) and goes in same on/off position. What could be the issue

I’ve got a very similar laptop to this, but it’s the K110TX comes with an i7 4510U and an NVIDIA 840m, but as you said the HDD is absolute garbage. I’ve taken it apart multiple times trying to diagnose a power issue (happened to be the charger itself lol) so that won’t be a problem, but what sort of mid range SSD do you recommend for it? Looking at a 1TB if possible. Edit: I was just thinking about something like a Crucial MX500. They’re only $100 for 1TB here in Australia, so that’s not an expensive upgrade compared to the performance gain of an SSD over the 5400rpm drive in this thing at the moment.

I did this door chime guit but now I have no blinkers speedometer and windows won’t open

It didn't deserve a pleasant desolder. I popped that fucker off with a flathead screwdriver and threw it at my girlfriend. She got pissed and dumped me. Good riddance to the both of you.

thank you a million times but please go back to school because your announciation was more annoying then the buzzer thanks again

I just want to say thank you. You are a lifesaver I couldn't get this thing open for the life of me and with your video it made it simple again thank you

Thank you 🙏, thanks for your hard work the way you have posted video it was very easy to understand how to open the hp laptop envy series please keep continue posting some useful video that can help millions thank you 😊 🙏

Thank you so much, you saved me so much time and the breaking of my laptop.

Thanks for Video. Very Helpful for upgrade my SSD HDD....

What is the reason for removing the valve on the hose from the tank to the canister?

I get in and out of my truck a lot, leave it running, leave the doors open, leave the keys in it, and the damned chime was driving me insane. I’d tried the ignition tumbler solution; the voodoo solution of latch the belt three times, switch on the lights, latch three more times, swing a chicken over your head; and a few other worthless procedures. This is the only solution that shut the damned thing up for good. It’s a simple job I was able to complete from start to finish in far less time than it took to watch the video. Thank you, thank you, thank you.

Thank you greatly for this video . It's very helpful on locating it and solving the issue . I plan on taking out the chime on my 2000 Ford Ranger Supercab before it gives issues .

Thank you so much! Very useful info. Even a butterfinger like myself was able to install a new SSD thanks to your detailed instructions. Much appreciated.

Not much point doing this and leaving in the holder for the cannister, throw it in the bin and use the spacer from the spare bolt of the cannister mount (bottom one) with the long fairing holder (top one) to mimic the same length it was. Then recable tie all the messy wiring up away from the radiator

10/10

Did u leave solder out of holes or had to make a connection. ?

Mine does it now none stop .

Beautiful silence, that's what I want. I'm gonna try that. I removed the box this afternoon and I'm leaving it out. Doesn't seem to affect anything else. Thank you SO MUCH for the video. That noise was driving me NUTS!! Well I just found out that THAT particular module is for the 4 wheel drive on the 06. Same description and everything, but it is NOT for the door open chime. The chime for the doors open, headlights on, key in the ignition is on the backside of the gauge cluster. You have to remove the cluster and look for a round black plastic thingy. On the 06 ranger its right behind the speedometer. What I did is once I had the cluster out of the dash and just pry off that black round thing. Put it all back together and wahla, no more annoying dinging. In his picture, that is exactly what the piece looks like, but on the 06, it's on the back of the gauge cluster.

Do u get warning light on dash once gone

nice video..

Great video!! I would like to ask at 12:30, how did you remove the original clamp from the hose on the right to put the new clamp on there?

This guy put me to sleep

Did this on my 18' factory and noticed that after the bike has been sitting there is oil that comes out the hose that originally had the valve. I did the same thing as you and used a hose connector and routed it to the right side by the other hose that dangles to the bottom. Has yours done this, do you know why it's dropping some oil? Could it just be old carbon buildup?

Fantastic tutorial, which I used to learn how to open up the case and get access to the RAM for replacing them. Useful for more than replacing the network card and antenna. Thank you!

When I find mine I'm beating it with a sledge hammer

Ty Ty Ty was driving me crazy