Ford Ranger Door Chime Problem - Solved (REALLY)

[@tiggerman7322]

It's not the most mature thing I've ever done, but do know how satisfying it was to take that little buzzer when I disconnected it, put it on an anvil, and smashed it into shards? I could feel all of the stress in my shoulders start to melt. Thanks for uploading!!!

[@techtube3831]

Lol, I know the feeling! Thanks for watching!

[@thomasschwarting5108]

I knew THAT feeling, FREE at last!!

[@Austinadcock]

Great video. I did this on a 2002 Focus last year that had the same problem. I now have a 1998 Ranger with the problem... So I wanted to see the location of the module. I'm glad you did this for people having this problem. I wish they wouldn't put these silly buzzers in cars it's the worst when you are diagnosing any problem on the interior or you are trying to read scanner data and the car yells at you the whole time..

[@itsJohnnyDill]

Thanks x1000 for posting this. I did the procedure in maybe 30 minutes! Vehicle is a '02 Ranger XL 5 speed 2.3....... I used a dremel tool with a miniature burr tool attached. I simply ground down the two connections until they were flush with the circuit board then very carefully pried it until the chime speaker popped free. No more phantom chimes, EVER! -Regards from Waterford, Michigan USA :-D

[@drgprayer]

Id fire the engineers that come up with this, you don't need it, it cost money and it has no useful purpose.

[@1StarSpangledBanner2]

THANK YOU! THANK YOU! THANK YOU! I just finished this on my 2000 Ford Explorer and it worked perfectly. Wasn't really that hard thanks to your detailed instruction. The hardest part for me was getting that screw back in that holds the black box. I lost it and replaced it with something that worked. Also, I didn't de-solder the connections. I just twisted the bastard a little with a pair of channel locks until it came off. If it weren't for you I would have had to just deal with that annoying beeper. My situation was that about 7 seconds after every time I started the vehicle, the beeper would do a series of 5 beeps for 5 times. Infuriating. Also do it again every half hour or so. My deepest thanks and appreciation for your efforts. You made someone really happy today. Blessed silence! Steve from Toms River, NJ

[@computerrebooter]

Awesome, your very welcome! Glad it helped.

[@billtaylor3625]

5 beeps 5 times check your airbag light bulb this almost made me pull my hair out several years ago

[@thaddeauscaldwell7101]

Hahahahah, that is freaking funny of what you said " I just twisted the little basterd with a pair of channel locks and it came right off " hahahah. It's crazy of how such a little thing like that , can make such a loud sound. My 2000 Ford Ranger Supercab hasn't given me this issue yet , thank goodness. But a while back my Mercedes would chime like that and drive me crazy and then after a few months it just quit , before I could take out the chime speaker.

[@generic-oldwhiteguy]

Extremely well executed video. Step by step. Measured descriptions that followed each step and you logic. You took it through to the end and voila it works. A technical work of art my friend. Thank you!

[@_munkeymunk]

Thank you immensely my friend!!! i was ready to take a hammer to the dash lol!! you saved me much troubleshooting and sanity from the buzzer! Much gratitude!

[@techtube3831]

Michael jT you're very welcome! Certainly know how you feel, glad it helped. Thanks for watching!

[@sunburntcurt]

I get in and out of my truck a lot, leave it running, leave the doors open, leave the keys in it, and the damned chime was driving me insane. I’d tried the ignition tumbler solution; the voodoo solution of latch the belt three times, switch on the lights, latch three more times, swing a chicken over your head; and a few other worthless procedures. This is the only solution that shut the damned thing up for good. It’s a simple job I was able to complete from start to finish in far less time than it took to watch the video. Thank you, thank you, thank you.

[@techtube3831]

Awesome, glad it helped. Thanks for watching!

[@thomasschwarting5108]

Beautiful silence, that's what I want. I'm gonna try that. I removed the box this afternoon and I'm leaving it out. Doesn't seem to affect anything else. Thank you SO MUCH for the video. That noise was driving me NUTS!! Well I just found out that THAT particular module is for the 4 wheel drive on the 06. Same description and everything, but it is NOT for the door open chime. The chime for the doors open, headlights on, key in the ignition is on the backside of the gauge cluster. You have to remove the cluster and look for a round black plastic thingy. On the 06 ranger its right behind the speedometer. What I did is once I had the cluster out of the dash and just pry off that black round thing. Put it all back together and wahla, no more annoying dinging. In his picture, that is exactly what the piece looks like, but on the 06, it's on the back of the gauge cluster.

[@josephloudenback269]

Thank you, I have a Ford ranger 1998, same problem, and within a day after watching your video was able to take that beeping car part out..... I did try just unplugging a set of wires, but the broad is tied together with the speedometer, so thank you for pointing out that small cylinder.

[@techtube3831]

You are very welcome, glad it help. Thanks for watching!

[@Hellcat565]

YOU my man are a genius, THANKS your video was clear concise and Correct Finally that stupid chime is off

[@techtube3831]

Model Flyer Glad it helped my friend. Thanks for watching!

[@mikey1600]

Thanks for the info, it helped me to rid me of that annoying door chime. I followed all the steps and now the chime is riding in the ashtray. Thanks again.

[@techtube3831]

You're very welcome. Thanks for watching!

[@normquilhot685]

Thank you. I have a 2003 Ford Ranger Edge 3.0L. Thanks to you, no more buzzer.

[@techtube3831]

Glad it helped. Thanks for watching!

[@georgealexander3340]

Thanks for the info. I will do this when I replace the malfunctioning sound system. Seems like a good time to fix the chime and the radio.

[@darrinbunston5932]

Definitely going to try it my door chime I hate that damn thing cuz I'm unloading stuff out of the truck and it keeps going off I'm not stupid I know the doors open I don't need some dumb door chime to tell me Thanks for posting this video There is one thing I do differently and that is once I find that circular chime I'm going to cut it apart with a Dremel tool and leave it soldered to the board

[@justincoleman2740]

Cheers fella. I just purchased this issue. Very helpfull and kind hearted.

[@techtube3831]

Glad it helped. Thanks for watching!

[@steveallen8692]

That's what I have been looking for. Thank you for sharing this video.

[@techtube3831]

You're very welcome, glad it helped. Thanks for watching!

[@thaddeauscaldwell7101]

Thank you greatly for this video . It's very helpful on locating it and solving the issue . I plan on taking out the chime on my 2000 Ford Ranger Supercab before it gives issues .

[@SeegarsInSC]

Perfection. Thanks for the detailed video. Took me all five to ten minutes to take care of the problem. #BlessedSilence

[@Slidenomad]

Thanks bro. I got accustomed to it and end up blocking it out. But now I'm going to get rid of it.

[@computerrebooter]

You're very welcome, thanks for watching!

[@FCT8306onTwoWheels]

i just did a door latch swap on my truck because the used door I swapped in was from a different year and the switch was a different style connector, so I do have a functioning door chime when the key is in the ignition and door open or closed but I got a courtesy light issue to figure out now.

[@rafaelhuicochea7158]

Thank you for sharing your experience, this will help me a lot on my case.

[@techtube3831]

Rafael Huicochea You are very welcome. Thanks for watching!

[@raroo296]

your video was very helpful! I have a 97 ford explorer and it's the same way to fix . thank you for this useful knowledge

[@techtube3831]

Troy Tillery you're very welcome. Thanks for watching!

[@grantbotteron9312]

thank you a million times but please go back to school because your announciation was more annoying then the buzzer thanks again

[@techtube3831]

Says the guy who thinks "announciation" is a word 😂🤣😂🤣😂

[@robdinan135]

Great video on how to solve this problem, thank you !!!!

[@techtube3831]

You're very welcome. Thanks for watching!

[@JoelTGM]

im going to do this on my 02. thanks so much for going step by step like that.

[@georgealexander3340]

Did it work on your 2002 Ranger? Was it in the same spot? If so, I want to do it on my Ranger!

[@joeh690]

I pulled my module and I don't see a buzzer 😢 2008 Ford Ranger Fx4

[@_Greasyzoku_]

My ranger is a pos & not my daily so I just took a soldering iron to the two connectors on the board holding the “bell” in place for a bit until I warmed them up enough, as it warmed them up I jiggled it’s back & forth until it came out. Easy. I did not no looking for wick or anything.

[@brandonwoods9282]

You my friend are awesome that helped I just twisted the speaker off it came off really easy didn't damage the circuit board or anyting

[@computerrebooter]

Glad to have helped. Thanks for watching!

[@nathanbrandon4637]

On my 97 the ding gos off if the door is open (key is not in the ignition) but dings like it is

[@gamernaruto680]

What I want is to fix this chime on my 1999 Mazda B3000 SX not to take it out. The problem is that the chime doesn't work when the key is on the ignition switch with the door is open and when the ignition switch is in the on position.The chime basically don't work and not make the noise. The other ones work except the sestbelt one. If someone can help please respond

[@stevemccown167]

How do you know its a door chime problem ? I have a alarm going off that sounds like a fork lift backing up that goes off 5 times in a row ( a total of 25 times )the alarm is behind the glove box My truck is Ford Ranger 1997 for wheel drive w/ 4.o engine / does anyone know what the hell it is ?

[@ryanmalone4782]

I don't know if you got an answer, but likely your airbag indicator light is burnt out, in the instrument cluster. Yours should be a 194 lamp, just buy a pack of 12 or more (I think there's 11 lights) and replace them all.

[@fiebre4x418]

Just tank you tank you!!! it really helps I was going crazy

[@computerrebooter]

santos torres You're very welcome, glad it helped. Thanks for watching!

[@ragu1120]

was your interior light and cargo coming on as well ? or just the chime. I'm having the same issue with my 07 f250

[@techtube3831]

The interior light was coming on as well, just ended up removing it.

[@GypsyPriest]

What a blessing!!!

[@josephcunningham2137]

Very helpful thanks

[@adamhondaxr250l4]

I'm thinking about trying to take the the buzzer part off the motherboard so far everything still working fine in your truck? I tried the wd40 in the door jams, it also has to do with your seatbelts. but I tried all that 2 or 3 times and replaced dash bulbs...so I'm at the point where as you said that annoying sound has to go.

[@computerrebooter]

Adam honda xr250l I got a new explorer a few months ago, but up to that point I never had any problems stemming from removing the buzzer. Thanks for watching!

[@lexuses3942]

Lifesaver 🙏 now just remove the light from the cluster and good to go

[@russianbot4234]

SILENCE!!! Thank You!!!

[@techtube3831]

You're very welcome. Glad it helped!

[@trackrash]

Very cool video! Thank you for sharing!!

[@techtube3831]

Thank you for watching!

[@adamhondaxr250l4]

if my dash lights are out would that cause the chime sound. It happens after my vehicle runs for a few min then like every 20 min when your driving randomly. I have the same truck basically 98 ford ranger xlt. thanks for the great video

[@computerrebooter]

Adam honda xr250l No, burned out dash lights won't cause it. Some say it's the door, some say the ignition. I didn't figure out the exact cause, I just wanted it gone. Hope the video helps. Thanks for watching!

[@Noname-lk2ol]

Yes it is because someone pulled out the airbag and check engine bulbs. It could also be because the seats arent conected to the plugs. Mine started going off once I removed the bulbs and got new seats from the junk yard. So I dont know which caused it.

[@Krismechanixx]

This worked perfect thank you for your time and information.

[@techtube3831]

Glad it helped. Thanks for watching!

[@erikbarrios4848]

I have a 2011 Ford Ranger xl and every time I hit about 60mph on the road, this loud beeping sound goes off. Would this work for my truck ?

[@techtube3831]

Yes it will, but remember if you remove the buzzer you will not get alerts for anything, like headlights left on or keys left in ignition so you have to be extra attentive to these things. It was worth it for me! Thanks for watching!

[@classictv2525]

think u for the video....it help out a lot bro....thxs man(:

[@techtube3831]

Keon Jeffreys You're very welcome, glad it helped. Thanks for watching!

[@classictv2525]

No problem bro.....👉👍

[@trentmiller7532]

It would have been nice to hear which sound you were talking about.

[@timharbin1846]

Did u leave solder out of holes or had to make a connection. ?

[@jasoncooper3116]

I may get a test light and see which wire on the connectors flashes to the sound of the dinging and snip it.

[@Northern_shenanigans_Mi]

thank you for showing us how to do this :)

[@techtube3831]

You're very welcome. Thanks for watching!

[@andruwwilson8367]

I installed a aftermarket radio and now my car won’t start and windows won’t roll down as well as the door chime won’t work unless it has 12v from my cigarette lighter

[@ChevyAddictLLC]

Thanks for that information

[@resoslide]

Is this the same buzzer that the seat belt warning uses?

[@DH-mh3cw]

Hi I used this tutorial and removed the speaker, I lost my dome, wipers, and 4x4. Any ideas? Fuses look fine

[@techtube3831]

If the fuses are ok only thing I can think of is to double check all of the connections. No one else has mentioned this happening. Hope you get it worked out.

[@shaunparsons9610]

The dome and wipers are controlled with this module. It must be plugged in for them to work. Anyone ever try just replacing the module?

[@stephenspalding2481]

Ty Ty Ty was driving me crazy

[@kingburris455]

Thank you , I got up to the point where u take the panel out. But I don't have the sorter to remove the chime

[@rognkat1]

a simple soldering iron and solder wick will do the work. There are plenty of you tube vids on how to solder and remove the solder. Just use enough heat as one of the holes may be ground which means you have to heat a lot more mass on the board then just the contact to get the solder to flow.

[@pickupgenius]

Great job ! We have a 2002 Tarus and hopefully its the same .... Il try it :-)

[@techtube3831]

Thanks! And good luck with the Taurus.

[@daniel.pendzich]

My noisemaker is going bad (sounds tinny and crackly) and I want it to sound normal again. Can i solder a small speaker to the circuit board to fix this or is it a waste of time?

[@techtube3831]

I don't see why not. Thanks for watching!

[@Exod365]

The door buzzer is 1 wire attached to a flat piece of metal that is on the outside of your key switch. It's grounding out just pull it out. Lol

[@techtube3831]

Well hell, that sounds much easier! You should post a video.

[@noconsentgiven]

For 03 explorer owners the chime may be in the gauge panel board.

[@SgtJoeSmith]

Gem module between cluster and stereo. Pull stereo bezzle

[@kmckmc6916]

Is this the same in a 2004 Ford Explorer Sport Trac?

[@kmckmc6916]

I need to do the same thing to my Sport Trac but am wondering if that is where I find the offending part.

[@Elksniffer1]

What if you just unplug the two plugs and leave it? Will the truck still work??

[@techtube3831]

Jeff Carroll NO, that module controls a host of other functions.

[@seantherien1916]

Thanks my truck only had one screw on the duct work too

[@melindathome6200]

Help ..my 99 ranger had this problem..showed hubby your video he had it done in 15 minutes..I left to go to store..NOW MY WINDOWS DONT WORK..ANY SUGGESTIONS?? ANYONE ??

[@techtube3831]

Have him make sure that he correctly plugged the main plug back into the box that holds that circuit board. Or he may have accidentally hit something and blew a fuse.

[@jessehiveley6347]

Can you just leave it unplugged or does it mess with other things?

[@techtube3831]

It is the buzzer for everything, so once you remove it you just have to remember to take the keys out, shut off the headlights etc. Without assistance from the buzzer reminder. Thanks for watching!

[@Quaysar1962]

Thanks mine just started doing this today so I'm going to remove that pest today

[@techtube3831]

You're welcome, hope all goes well. Thanks for watching!

[@josegonzalezramirez9374]

Does this stops the headlight reminder to go off as well because my headlight and everything is off and my headlight reminder goes offf

[@techtube3831]

Jose Gonzalez Yes, this is the speaker for everything. Once you remove it you will not here a reminder for anything. Just don't forget to turn your headlights off or leave your keys in the ignition! Thanks for watching!

[@randyautrand5950]

Thanks for the video. Im removing my brothers today. Thanks again

[@computerrebooter]

Randy Autrand You're very welcome. Thanks for watching!

[@jddsoz3922]

Dude what the hell I did this and my Transmission didn't want to change Gears ,so I plug it back in and now my transmission changes gears .. another way to disable it ????

[@Justanothermember7]

Just curious, but where is the buzzed for the turn signals?

[@torymarquez8945]

Flasher in fuse box big circular thing

[@russianbot4234]

Ding ding ding ding it’s maddening!!!!

[@josesoto9099]

Im trying this i just got a ranger and it annoying

[@andyheinecke1280]

will this work on a 95? great video man thanks for the info

[@techtube3831]

Andy Heinecke Not really sure man. I guess you could just take the radio bezel off and see if the box (where the speaker is) is in the same location. good luck with it, thanks for watching!

[@floydspencer2406]

thanks man that really help.

[@techtube3831]

You're very welcome, glad it helped. Thanks for watching!

[@michaelbies1321]

I did this door chime guit but now I have no blinkers speedometer and windows won’t open

[@techtube3831]

Check to make sure that you plugged the harness plugs back into the box correctly, also check your fuses in case you may have accidentally blown one. Only things that I can think of. Good Luck, hope you get it worked out.

[@michaelkrell4429]

WD40 first is worth a shot, worked for my 98 windstar

[@RobertoCervantes-e4w]

Tnks

[@philrichardson4984]

Yes my 07 f450 has the same chime this the closest ive come to ending this annoying chime seems that ford engineers think we re to stupid to jnow if our door is open

[@Godsvessel4truth]

Get top the point. People talk way too much and people don't have time for all there nonsense talk when they're trying to figure out how to ferry there vehicle running again. Just state facts. Here's the problem, this is the solution

[@techtube3831]

That was quite a mouthful for someone who has so little time on their hands 😄

[@motoduster5856]

does it do it every time you start the vehicle?

[@itsJohnnyDill]

Mine did most of the time. Not anymore. EVER. :-D

[@RCGshakenbake]

If you only knew how BAD THAT POS CHIME WAS.

[@kaeleylunt607]

Yes

[@nofloco3175]

Would be cool if you showed the noise and you de soldering it but good video anyway.

[@shawnwing7787]

If I'm a little sketched out with my ability to do this would there be a wire i could cut? Lol

[@nicksturm7131]

what year ranger is this

[@techtube3831]

It's a 2000

[@gunneredwards7710]

I just broke the fucker off Then when I plugged it back in my windsheild whipers and speedometer quit working

[@fishingwithhoffman7365]

Good video but you needed to get strait to the point bro.

[@Eeropolvasti]

No, No, No....your driver door latch is stucked!!! Typical Ford problem, just WD40, usually un stuck it, if not, just replace it !! Not this kind of work, no, no !!!

[@computerrebooter]

Eero Laukkanen LMAO!! Yes, Yes Yes!

[@El-Burro-Grande]

2003 Ford Ranger Edge with this problem. Have done the WD-40 trick on both doors - didn't fix it. Replaced both door ajar switches. Still bings randomly. Disconnected both door switches. Still bings randomly. Has nothing to do with the doors. Its caused by a fault somewhere else in the system. No idea where.

[@timharbin1846]

Mine does it now none stop .

[@NB-bj2vy]

I did exactly that and didn't unhook my battery. my cigar wires touched and fried my fuse. in cab fuze. so I changed it. well I also noticed my speedometer and whole IP cluster does not work now lol. not Shure what to do now. I even checked main fuze box under hood and the IP fuse is fine?

[@techtube3831]

Nick Brown Man, sorry to hear about that. I didn't unhook the battery myself. Hope you got it all worked out. Thanks for watching!

[@barryjohns1965]

You fried your cluster. You will have to buy another. Also this guy could have just looked on his wiring diagram and found the wire that runs the buzzer and cut it. Much easier and safer because that box is the GEm module that runs the whole truck. He should have just replaced that whole module because it is going bad and it will continue to go bad and he will replace it sooner or later. But yes you fried our cluster. ALWAYS take the battery loose when doing any electrical on a vehicle.

[@Bubbles_6.0]

I popped mine off with a flat head screw driver😂😂

[@leatherhorse1]

give me 30 more reaons why it annoying

[@trackrash]

Sollder

[@danielwhite4825]

IKR pronunciation school needed

[@joellhaws2604]

$5

[@gdietz2]

If you decide to make another video, get video editing software. Your information was good, but way too much talking. That video could have been done in 4 minutes.

[@techtube3831]

Grant Dietz Says the guy with 1 video and 3 subscribers. How about you do it your way and I'll do it mine. Take care.

[@gdietz2]

TechTube... Sir, I wasn't trying to insult you and if I did, then I shall apologize. I'm sorry. If you don't want advice for an issue I saw is problematic, then I will delete this entire thread. But... every KZbin mechanic can use editing software to increase viewership... If that's what you're after.

[@danielwhite4825]

​@@techtube3831yeah this guy meant no harm, but go back and find my comment because I was being more honest that your wife is .

[@MrFPilati]

This guy put me to sleep