I use QR control on the App Store. Designed to control modes of the GoPro LABS software
@michalpesek13976 күн бұрын
Hey there! I need some help with my Tango II settings. When I push the pitch or roll fully on my remote controller, my drone doesn't achieve the full range of motion. It won't do proper dives or flips; instead, it responds slowly and with limited movement. I've followed various setup guides and checked my remote controller settings, but I still can't figure out what's wrong. Interestingly, when I test the controller in Betaflight's Receiver menu, everything appears to be working fine. Any ideas on what might be causing this issue?
@jasondonavich27588 күн бұрын
When we put the file on the sd card and put it in the goggles, do we need to keep the sd card in the goggles with the file on every time we want the 1200mw mode or does it write the file to the goggles firmware and then we can remove the sd card?
@YonnBurgosАй бұрын
Great tutorial! I leaned a lot today. New to the hobby!
@JeffHochbergАй бұрын
I would like to thank you for your video! Why DJI doesn’t say this in their documentation is beyond me! They don’t even include a USB-C to USB-A cable in the box with the Avata 2 Fly and More (3 batteries) combo. I was able to connect, upgrade and activate the drone and the control stick via the DJI Assistant Consumer application on my MacBook Air M1 with a USB-C to USB-C cable. The goggles connected to the Mac one time. It was long enough to activate them - but they wouldn’t connect after that. I even switched to a computer running Windows and it too wouldn’t connect with USB-C to USB-C. I found your video, then grabbed a USB-C to USB-A cable. I connected the goggles to my Windows laptop (ThinkPad 11e) and bam! They connected and I was able to upgrade the firmware! The other thing that completely blows me away is how DJI relies on an open source USB driver for macOS users that hasn’t been maintained since 2016 and it won’t work on the newest operating system or Apple Silicon Macs. How do Mac users activate their drones? Find a friend with a Windows machine? How is it a company as technologically advanced as DJI can’t write their own driver? That should be a drop in the bucket for them.
@M.TTT.Ай бұрын
Hmm, mine says "Looking for devices" despite being on openTX 2.3.9 on my QX7s. I'll have to keep looking for a solution
@M.TTT.Ай бұрын
updated my radio to openTX 2.3.15 and agent lite 0.98 and all seems to work now.
@amandal490Ай бұрын
Thank you!!!!
@MCsCreationsАй бұрын
Beautiful footage, dude! Really nice! 😃 Stay safe there with your family! 🖖😊
@nateboulter804Ай бұрын
Thank you so much! That was so frustrating and DJI says nothing about it.
@ALWA7SHSEX2 ай бұрын
Where is the dvr image? Lol
@sandro93892 ай бұрын
Do I only have to change the 500mW in the Tango 2 or also with the receiver with the TBS crossfire Nano? Thx 🙏
@ThunderFarter2 ай бұрын
I click open but nothing happends
@johnraahauge45523 ай бұрын
Have you had a chance to test the Phoenix UAS mRID module in a GPS Rescue situation? I have my gps receiver configured to use 57600 and 10Hz update frequency, but I’m suspecting that’s not what I’m seeing at the FC because when I try GPS Rescues, it seems jerky like the updates are too slow. I get the arrow pointing towards the home point and lat/long readout, but I’m suspecting the updates are not anywhere near 10Hz.
@nathanwebster28003 ай бұрын
You're supposed to have an observer when you use fpv goggles or VR goggles by law quit breaking the law
@scottporter44544 күн бұрын
Shush under article 16 you don’t
@ArikCool3 ай бұрын
I appreciate your very informative video!
@MCsCreations4 ай бұрын
Long time, dude! It's great to see you! 😊 Thanks for all the info! Stay safe there with your family! 🖖😊
@5zero7RC4 ай бұрын
Thanks! Trying to get back to making a few more videos again.
@mxgx5754 ай бұрын
THANK YOU SO MUCH, this gives a huge advantage on giveaways and stuff
@liltoto3714 ай бұрын
This is so cool omg😂
@Farfromhome_less4 ай бұрын
GREAT VID STR8 TO THE POINT
@Farfromhome_less4 ай бұрын
SUBBED BTW
@mikelbcn914 ай бұрын
Came for the arm replacement, that part is not in the time-lapse? cmoooon! Just having the same problem, will be ordering some parts and see if I can get mine fixed....
@b2mljurjen5704 ай бұрын
Hey, maybe I missed you saying this, but how do I keep track of the voltage lowering whilst riding my rc car?
@spb11794 ай бұрын
Can you do something like this for 2.4GHz and explain some of the radio protocols like this?
@MystikSquash4 ай бұрын
Can this be powered by the 3.3 pin output?
@CelikDastan-ww9cl4 ай бұрын
HOBBYWING SKYWALKER closed-source ESCs are more carefully programmed than BLHeli closed-source ESCs and do not impose any additional costs on the user. BLHeli closed source ESC is a fake ESC that was accidentally and deliberately made with random signal values and promises too much to customers. The ESC program written on social media by the company BLHeli, which also includes the construction of drones during calibration. Subscribing to chaos to get help from social media, which should not have a subscription fee, is another harmful dimension of being positive. Comments and quotes from some people support the confusion that BLHeli supports. After all, you are making an ESC and you have to present it with a value that should not be presented to the customer. Why so much confusion! ? All these people want is fake service. Entrepreneurs constantly have to purchase BLHeli products to complete their business. In addition, the complexity and cost of subscriptions, as well as the loss and waste of time, make customers miserable. Mr. Bill is a liar. Moreover, they are a terrible company and the services and products they provide to the people of this planet are literally miserable due to their fraud, insensitivity, exploitation, undermining development with silent terrorism, and disrespect for those who work hard. Economic damage to people's educational efforts. And BL Heli Corporation is a harmful company that destroys development. In the name of human development in the world, it has become inevitable for international authorities to seize all information and assets of companies and appoint trustees to these companies. In many countries, it has become mandatory to appoint a trustee for the information and assets of such companies.
@JulesOille5 ай бұрын
My GoPro Max doesnt respond to any QR codes- nothing happens - I updated the firmware nothing.
@Kevin-mi2xj5 ай бұрын
Appreciate the video but just a suggestion - you might want to get into the actual info quicker. It took you 4 minutes to really get into any rules and the first 4 minutes were just really repetitive saying the same thing over and over. This video is a few years old so maybe you have streamlined newer videos.
@maurogutierrez5 ай бұрын
Hello, great, I have a 1W Tango 2 and an Iflight Helion with TBS Crossfire Diversity with Nano RX and the XF NANO RX option does not appear, I only see Tango II XF and Tango Wifi, Could you please help me, thank you!! ! 👍
@cjstewart79795 ай бұрын
Hey there! Thanks for putting this together. I have an issue, hoping you can help. I don't have an option in BF10.10 for a 4.5-zulu firmware and I absolutely cannot get GPS to work on 4.5.0-RC2. Any idea what's going on?
@MyloMusica5 ай бұрын
It doesn't detect my Mavic air 1 RC. Do i need to download a driver?
@BuddsSkyCam5 ай бұрын
Have you been able to test out RTH yet over mps?
@5zero7RC5 ай бұрын
I have not personally tested it, but I know others have, but you may need betaflight 4.5 for it to work... github.com/betaflight/betaflight/pull/13269
@BuddsSkyCam5 ай бұрын
@5zero7RC yes i have tried it on rc2 4.5 and 4.5zulu.
@BuddsSkyCam5 ай бұрын
@5zero7RC can you share any videos of it working? I cannot find anyone who has made it work and i just tried it again on a 3rd drone on 4.5 rc2 and the drone gets lost and cant find home
@DrDroneFilms2 ай бұрын
@@BuddsSkyCam I'm having the same problem as you! I can get the GPS tab to partially work with GPS over MSP, but still can't see the quality of satellites. Whenever I arm (making sure I have plenty of satellites, usually 12+!), the OSD warns "RESCUE N/A", which means I GPS rescue won't takeover in the event of a true failsafe. When I activate failsafe via switch, it just hovers in place for 20 sec (and is of course blown by the wind) due to sanity checks. I noticed that telemetry and betaflight will recognize the number of satellites, but my OSD always says "NC", which I'm guessing means that the OSD parameter, which must be different than telemetry (?). Perhaps there's something there on why GPS rescue isn't working when using GPS over MSP with the Flite Test EZ ID. I opened a bug report on the betaflight github page, but I don't think the developer understood my problem. I'm curious what you think. github.com/betaflight/betaflight/issues/13484
@Sergio1079523 күн бұрын
@@BuddsSkyCam any luck finding someone who has made it work? I'm currently trying to figure it out myself
@VikSim_VS5 ай бұрын
I have problem, my file shows only gps coordinates, camera settings, but NO signal strength, channel and so on .. someone a hint ?
@hawaiiangunner6 ай бұрын
I'd like to talk about the fact that I can go out right now and buy a ultralight airplane and fly anywhere I want just about without a license. These drone laws are absolutely stupid and only exists because the elite are worried people are going to video them without them knowing it
@RobsColoradoLife6 ай бұрын
Thanks for the parts website!
@dylanceder-reinke53586 ай бұрын
-10 in alaska today about to fly again, flew it last night in -5
@myfpvshots6 ай бұрын
I have 2 fpv quads and bounded one by one. I used the first quad and changed to the second one. Do I need to rebind the second quad again?
@5zero7RC6 ай бұрын
No, once you bind all the receivers in your quads you should be good. Any powered up receiver will get a signal from your radio after they are bound. So be sure to only have one powered up at a time! :)
@myfpvshots6 ай бұрын
@@5zero7RC Thank you for your help :)
@AshTag6 ай бұрын
This is extremely helpful. Thanks!🤗
@PremiumK9Krunchies7 ай бұрын
Its pretty cold today.. take out the drone?
@5zero7RC7 ай бұрын
No, I have not flown much lately. Too busy riding my fatbike in this nice cold weather. :)
@PremiumK9Krunchies7 ай бұрын
@@5zero7RC That's awesome, I'm on the Mississippi near Albertville. And it's literally frozen over and not moving as far as visual. I took my drone out for some video I might post a short later
@seasonalvibez7 ай бұрын
Thanks! Similarly struggled to get the dang things to talk to one another. Turned out I actually had to have the USB-C to USB-A female adaptor plugged in to the mac, then the USB-A male to USB-C pluggied into the goggles for it to work. Same cable setup flipped around (which was the recommended way on the general binding video iflight provided me) didn't work 🤪
@billwillson53617 ай бұрын
How cold have you flown it in?
@5zero7RC7 ай бұрын
I think this video is the coldest weather I have flow the DJI FPV drone in. So about -10F. I have flown other drones I have built in about -20F.
@FPVFRASHA7 ай бұрын
I'm sorry to see that the drone flew down too close to your head and skimmed the top of it... close call your lucky is didn't hit you in the face and just took off the top of your hair instead... fly safe! drones are dangerous as we can see in this video! :O
@honestinjun867 ай бұрын
This still doesn't work for me. Using a usb-c to usb-a adapter connected to usb-a to usb-c and still no connection. This is wildly frustrating.
@BuddsSkyCam7 ай бұрын
There should be more shown in the gps tab. The gps tab should have info about each sat and yours is greyed out like mine. Once i switching to a separate gps from the ezid i then was able to see the data from each satellite in the gps tab. The way you have it setup does not work correctly and you will have your home point off even if you have 20 satellites.
@BuddsSkyCam7 ай бұрын
Tried RTH and today and even though i had 20 satellites and it registered my home point this gps would not work correctly to fly home. Has anyone had the RTH function work via msp? Im thinking there is a lot more work to be done here.
@SIrrfuzz7 ай бұрын
I broke my fpv my first time trying night flying luckily only one arm broke, im working on fixing it now just waiting for parts
@mNagАй бұрын
Busted one of my arms, I got DJIcare, but they still charge way more than an arm to fix it. So I'm gonna try the repair myself. How'd your repair go?
@BuddsSkyCam7 ай бұрын
You have the m8 version right? I got the new m10 version and am only getting 5-6 satellites and according to bardwell you need to do an update to the m10 for it work correctly. Do you know anything about the new m10 flit test module?
@5zero7RC7 ай бұрын
Yes, I have the m8 version of the EZ ID. As far as I know the m10 that is part of the EZ ID should have all the updates applied before it was shipped.
@BuddsSkyCam7 ай бұрын
@@5zero7RC this is the update, i think its because of the way betaflight is working with the m10 where the m8 already has everything correctly updated. kzbin.info/www/bejne/a5eldaSbdtSkrKs
@TheMoonwatchers7 ай бұрын
@BuddsSkyCam sort of BF4.4.x has too many dev mistakes and no support fro the M10 so it takes far longer for cold start. Use the better and safer BF4.3.2; GPS rescue is unsafe on BF4.4x in our opinion and we pulled it from all iFlight product that uses GPS - wait for BF 4.5 with full M10 support or just use BF4.3.2 that doesn't slow cold start as much on the M10. 4.5 is RC1 now release should not be too far. and its amazing with return to home and fast M10 support. too.
@BuddsSkyCam7 ай бұрын
@TheMoonwatchers i was talking on the bf discord and was able to get 4.5 zulu updated yesterday morning and i went from 6-8 sats sitting in my house on 4.5 rc1 to now 10-12 on 4.5 zulu just have to make sure barometer is off. They are working on it but 4.5 zulu with baro on and gps on, the gps will not work. Spent all day yesterday chasing that issue, after the day before there was an msp issue when using gps but its working really well today and i hope to test the gps tomorrow in a bigger area.
@BuddsSkyCam7 ай бұрын
Any Idea why when I select mps for my uart2 that its on that it removes everything selected from the ports tab?
@5zero7RC7 ай бұрын
If you try to enable MSP on a 3rd or maybe it is 4th port, it will reset all the ports. MSP is not supported on that many ports. That's my first guess.
@BuddsSkyCam7 ай бұрын
@5zero7RC i was going between your video and bardwells on gps m10 and i was selecting gps in tve ports tab after i clicked msp and that caused it to reset it.
@BuddsSkyCam7 ай бұрын
What do the other pads do in the row of 7? Is there another ground and power?
@5zero7RC7 ай бұрын
Not sure, but probably for the manufacturer to install firmware.
@femushy8 ай бұрын
BIRB
@allesprobieren8 ай бұрын
Highlights: 00:02 Tips for Flying FPV Drones in Cold Weather 01:36 Apply silicon modified conformal coating to protect electronics from snow and moisture. 02:50 Flying FPV drones in cold weather requires precautions to prevent fogging and moisture buildup. 04:07 Be cautious of changes in terrain when flying FPV drones in snowy conditions 05:48 Be prepared with warm clothing and accessories when flying FPV drones in cold weather. 06:57 Keep your batteries warm in cold weather 08:07 Using LED lights on your drone can make it easier to fly in dark and find it if crashed in snow 09:31 GoPro batteries don't last long in cold weather
@BuddsSkyCam8 ай бұрын
Have you tried RTH with that setup on betaflight? Are you using this same method for INav?
@5zero7RC8 ай бұрын
I have never tried to use INav. I have not yet tried RTH, but I do get good GPS coordinates in my OSD, so I assume it could work normally.
@BuddsSkyCam8 ай бұрын
@5zero7RC wish they made these with the m10 gps.... would be cool to see how accurate it is with RTH is with the rfid. Thanks for make thia post you are the only one i have found to have and do this