Hi Steve have you tried the 25 cal yet? i would like to know how much different it is than the 22 cal before i order one. Thanks and keep up the great work.

9.5 " barrel show it !are you sure it's not 19.5 " barrel BELIEVE IT OR NOT A 9.5" BARREL

you said a lot about the gun,alot about its tuning.but you didn,t say that this is the gun that hits the first shot low every time???

But a very special shout out to you kind sir. For putting this video together. You my friend have given me the information needed in order to properly own this rifle.

Sir this video is pure gold. I bought a used FX Maverick .25 Sniper with STX Slug Liner, Optisan Optics EVX 6-24×50, 3 magazines, extra 500mm barrel kit barrel kit and Donny FL Fatboy1.0 moderator, oh and I had a carbon liner added for free. All for $2100. I think that a FX slug power kit is probably installed as well. But I will get that confirmed. For pellets I will tune the 500mm barrel. It’s genius actually because whomever owned the air rifle before me considered both slugs for long range and pellets 100 yards and under.

I live in uk is it necessary to have FAC to by thi air rifle

49:53 My Eco tune gives me 800 feet per second but your figure says the otherwise what might be the reason please

To adjust stage 2 of trigger you need to take frame off, won't be done through trigger guard.

Please give me details on your castle nut wrench (where to buy)

Do you have similar detailed tutorial on Commander XR?

Air Superiority Adjuster no longer included in Atomic

Please explain those white nylon screws aropund the hammer

Pistol grip is not AR it's AK

I don’t normally watch long airgun reviews but I just did and enjoyed every minute of it. Admittedly I’m considering this little gun as my next purchase in cylinder or bottle format but I know longer have any questions to ask, only a decision to make - cylinder or bottle? Brilliant stuff as always Steve. 🇺🇸🇬🇧

Big thank you for a great instructional video, exceptionally helpfull. Just a querry with regards Internal Hammer Spring setting - how do you determine 0 point?How do you determine the max/ min setting? I take counter clockwise increases the tension- FPS.

My Atomic XR .22 didn't come with any washer nor any of the two hammer spring adjuster that you discussed. Are those supposed to be included? I got mine at Central Florida Airguns which obviously gets them from AOA distribution side.

What are your thoughts on using felt "cleaning pellets"?

Where can I get zero degree vertical grip.

I love your work. My Atomic .22 arrived today. After a nap I'll completely watch this video. Need to adjust trigger. It's about 5 pounds out of the box! On anotehyr note, I'd like to sehnd you a Stoeger XM1 Ranger and/or Scout in .22 and/or .25 for you to review. Extremely accurate. Mine gets ZERO SD ! IF YOU WANT I'LL SEND YOU CHRONO AND TARGET.

What adapter do I need to use a quick connect?

to much bla bla bla

Want to attach a front swivel mount to use a sling? Forget SabreTactical! Want to shoot prone, find something else.

I put my brand new maveric sniper exactly set for your recommended settings for the fx 26 grain slugs, and it has that tuned sound and is hitting on point! 13 squirrels down the first day, with just your settings. THANKS FOR YOUR TIME! MUCH APPRECIATED! RICK.

Why has he stopped youtube.?

I want to be able to snipe an egg 100 meters away with the Dreamline Lite 25cal. Please tell me how I should tune it.

As a newb to this level of air guns I can honestly tell you I’m fairly intimidated by the mountains of knowledge I’m going to have to acquire…and extremely excited

My gauntlet is a beast 2200 PSI regulator 4500 PSI 300 80cc tank with a shimd hammer spring yeah it's a beast

8:05 100% correct , thanks for another great video 👍

Weirauch is the GOAT

Essa carabina aqui no brasil custa o valor de um automovel usado 10.800 reais .meu sonho essa carabina e luxo ,o mais proximo e acessivel que temos dela de cano fixo e qualidade e a gamo cfx no cal 4.5 que custa uns 3 mil reais

Excellent review as always however, a couple of critical features are worth mentioning? I own both the AA TX200HC and the HW97K in blue laminate in .177 caliber. Both are stellar guns but here are two critical differences between the two: Firstly, the TX200's barrel is mounted in the center axis of the gun while the HW97K's barrel is mounted ABOVE its center axis. Why is this important to mention? Well, I've found that loading as small a pellet as the .177 in the TX200 is far more difficult because of the barrel's center axis design....you have to reach deeper into the sliding breech housing to place the pellet into the breech. Because of the HW97K's barrel being mounted above the centerline, it is sooo much easier to load a .177 pellet, especially those slippery ones into the breech because you don't have to reach in as deep as the TX200 to load it into the breach. Secondly, the TX200 is normally a right -hand specific airgun and the machined, cut-out access to the breech has a restricted opening, biased to the right-handed shooter. I understand this is still the case despite ordering the left-hand stock version? This is not the case with the HW97K where its ambidextrous design has a generous cut-out to facilitate both left-handed as well as right-handed loading. Bottom line is, the HW97K is sooo much easier to load in .177 than the TX200. Note that this loading difficulty does not apply to the TX200 in .22 caliber (which is easy to load due to the larger, .22 caliber pellet and corresponding, bigger breech).

Hi Steve. I see you offered pellet holders. For all my single shot spring, pump, pcp I get a Air venturi pellet pen, slot a 9id/10od CF tube fit it to the pen slight trim light dab of adhesive and glue to the gun were the breach meets the stock. Then you have a magazine. Hold the stock use your hand to pop a pellet into the hand holding the stock. It is a beautiful way to keep pellets with the gun and quick follow-up shots. Thanks for the video. Really informative for a guy who just ordered a HW 97. From AoA.

@19:00 You verbally say 44gr. then change to 47gr NSA but your images during testing show the 43.8s. Can you confirm which one was hitting bullseye? Two years later, of course. LOL

Can’t watch the full video but does he recommend the gun? I m thinking about getting one

Not too sure about that spring being exposed on the trigger

I have red laminate 54 22cal can hit a lighter at 100 yd all day.

H&N FTT always worked superior to other pellets in my rifle. I want to try RWS superfields soon. Just to test them out.

I’ve had mine for about 13 years and still shoots just as good or better than the day I bought it. I did have it custom tuned by Paul Watts down in Tennessee. He told me it wasn’t necessary but he could make it a bit better so I sent it and I’m so glad I did. It shot even better. It was smoother. Everything went click and clack right in place. SO SMOOTH. You should check out Paul Watts page. It’s just called spring gun tuning.

Great video and learned about tuning. But in the end, I returned the Avenger back to Pyramid due to being too long, way too heavy and a bad case of regulator creep. It actually weighed more than my Colt LE 6940 M4! Bought a Diana StormRider. which is 1.75 lbs lighter and 4" shorter. No more regulator creep either, lol.

Do you think your results would be similar with a .117 cal? As far as velocity and accuracy? Probably a dumb question.

Thanks for the informative video, just got my Avenger .25 in the mail this weekend. Cant wait to let her rip, this is my first PCP Rifle. Own multiple center fire weapons. Waiting for my ammo to come in the mail currently! Thanks again brother 🍻 cheers, Struthers.

Not too long...Great video, learned allot!!!!!

Thanks for your videos, I've been watching lots of them. Question please... I want a .22 pellet gun for hunting and it cannot have an noise suppression so I'm considering this one and the Diana 34. So, I might hunt in "cold" weather and hear the spring pistons are not as good in the cold. Does the accuracy I'd setup in the fall be moot in weather much colder and what is considered "cold" for these. There are not a lot of quality gas pistons out there I'm finding (if you know a bunch, PLEASE share). The $400 is OK with me if I find the right rifle. THANK YOU!

I love you guys!

Guns and guitars are basically the same thing , all springs, tentions, tunings, gravity ect... same 1 is a Better weapon tho ;)

I am fat ❤

Dont "retract every thing you just said" when you speak the truth, it maybe wise, it is also a sign of weakness.

Where can I buy one. Thank you

Just saw your tuning video after buying an Avenger. Thanks! Really like the Avenger except for the fact it suffers (like others) of regulator creep. Using a pro tune of 1800 psi, it creeps up to 2,200 psi after a few hours. Yes, you can dry fire it a few times to bring it down, but kinda defeats the purpose when your hunting and making noise on the hunt having to dry fire.

Weihrauch should really stop using flathead screws. That's the main thing I really hate about them. All their screws should have hex heads at this point.