Hi Harry I can get my YGE telemetry on my motor to RX port E1 or E2 but when I plug in my SE4 (changing in jetibox to "sensor" pin 4) it will not read it? is this not compatible with an SE4?

Thanks again for help with new functions. It is great help for us Jeti users.

Thanks Harry for all of the great videos and advice.

Harry, All of your tutorial video's are invaluable to Jeti user's I want to offer my sincere thanks to you for sharing your extensive knowledge, and the time you give in creating such detail explanations in the capabilities, and uses of the Jeti system Thank You

Hi Harry, I'm just learning about flight modes on my DS-24 and wish to simply add some preset control surface values for each mode. I feel like I've followed your videos pretty closely but nothing happens at the servos when I change mode. I'm obviously missing something. Can you point me in the direction of troubleshooting my setup? Thank you very much... jerry

Thanks!

Thanks for those super detailed video Harry ! Can I use a 900Ng instead of a second REx3 given the DS12 doesn’t have two 2.4 modules ? Using CB 220 with Cortex pro

Hi harry. Very nice Video. Please teach me how to install a 900 MHz antenna. Thanks you very much. Regards. From. Thailand.

Thank You very much for Your excellent presentations; best ever seen Happy New Year to Harry and ...

Happy new year Harry 👍

Takk!

Harry..bless you…thanks so much. Looking forward to 2025!

Thank you, I bet that even Jeti designers are not to your level of understanding of Jeti. My besy wishes for 2025.

Lots of good stuff to think about in this one ... Happy new year Harry

Best video ever. Weird I sent $5.00 but its not showing???

Thanks!

Hello, I have a Seidel ST-996, 9-Cylinder radial engine in a 3m-DHC-2 Beaver. Is it possible to add a 9 Cylinder to this app ? I tried it by myself, but I got so much errors, ..... and I am not a good LUA-Programmer. Thanks very much for this great app. Harald from Germany

Hi Harry, have you done a tutorial on using another make of Tx, specifically a JR XG11, to act as a buddy using a wired connection to a DS24? I'm on day 2 with the DS24, a second hand buy, and desperately trying to drink from the fire hose!

Thank you for the video. Do you know if LUA DS24 works with the DS24 II considering the sceen size changes ?

I’ve been outsmarted by my Jeti radio. Followed the instructions to the letter….still no go.

Where is the touchscreen? Passing on it, getting the PowerBox. Jetti is from the 1990’s. Pure garbage

Hi nice video 😊 can you add the site to get that free text to speak generator! Have a great day

Thanks!

hi harry have you found a screen protector for the ds24 v2 ?

Hello Harry, the first thing to do is to make a backup of all the files of the new radio in order to be able to return to an original configuration. best regards

Hello Harry, thank you for the video. There is one thing that might be interesting for many Jeti users who need to change what transmitter their receiver is bound to. While the common method is to connect the red "Bind Plug" to the receiver, there is another method that, in my experience, not many people know about. Here are the steps: 1. For safety, remove any props before proceeding! 2. Turn ON the already-bound transmitter (let's call it Tx-1) and the receiver in your model. 3. On the Jeti-Box Emulator on Tx-1, navigate to the receiver menu: “ <- Rx ->”. 4. Once there, continue to the menu showing the connected receiver type (e.g., “ Duplex R5 EX >> ”). 5. Inside that menu, you will find << Pairing ^ >>. 6. By pressing the Up-key, the receiver will enter the pairing mode, just like when using the red Bind Plug. 7. Turn off Tx-1 and turn ON the new transmitter. The new transmitter should find the receiver and bind to it (a timer will display, showing how much time you have left for binding). This method can be especially useful when a receiver is difficult to reach inside the model. For more information, you can visit: jetiforum.de/index.php/4-jeti-sender/6731-uebertragen-der-bindung-mit-hilfe-von-paring

Hello Harry, thank you for these video. There is one thing that might be interesting for many Jeti users who need to change what transmitter their receiver is bound to. While the common method is to connect the red "Bind Plug" to the receiver, there is another method that, in my experience, not many people know about. Here are the steps: 1. For safety, remove any props before proceeding! 2. Turn ON the already-bound transmitter (let's call it Tx-1) and the receiver in your model. 3. On the Jeti-Box Emulator on Tx-1, navigate to the receiver menu: “ <- Rx ->”. 4. Once there, continue to the menu showing the connected receiver type (e.g., “ Duplex R5 EX >> ”). 5. Inside that menu, you will find << Pairing ^ >>. 6. By pressing the Up-key, the receiver will enter the pairing mode, just like when using the red Bind Plug. 7. Turn off Tx-1 and turn ON the new transmitter. The new transmitter should find the receiver and bind to it (a timer will display, showing how much time you have left for binding). This method can be especially useful when a receiver is difficult to reach inside the model. For more information, you can visit: jetiforum.de/index.php/4-jeti-sender/6731-uebertragen-der-bindung-mit-hilfe-von-paring

thanks

Seems a bit more nonsense than anything really. My DS-24 is just fine. If it had a touchscreen then maybe then it could be considered. I’ll wait until 2033 for the next update.

Are you required to use a vario with the speed sensor or can you use the speed sensor by itself? Thank you in advance!

A bit of a shame that it is not possible to upgrade your old DS-24. Being able to send in your old one and get a new screen and software. Would be willing to pay a fair amount but i am not willing to buy a new one. It's a bit of a one time investment.

Harry, I see many of your videos are older so not sure if you still monitor comments. But just wanted to thank you! for these "tutorials". I am brand new to Jeti after years of Spektrum so this kind of help is so important to me. Most everything on my DS-24 is new to me, but I grabbed this particular video as it piqued my interest - partly for the ultimate result, but also for your mention of "logic" programming. As a retired IT guy, I found myself literally smiling as I followed along with your directions. Not only was this video informative and timely, it was FUN, haha. Thanks again..... jerry g

Jeti DS 24 II. Have a switch for Gear . Want to use Rudder Trim for trimming rudder in flight. However with Gear switch Down, want to use the Rudder Trim to trim the nosewheel steering which is on a separate channel and servo. How do I go about it ? Your inputs appreciated.

Is there any need to reset the origin as shown a few years back or does the DFM app take care of it this for you ? I have installed app and working and then I wondered if there was any need for that as you shown a few years back when showing the MGPS features

Annoyed that they removed the back plate sliders. 24 channels with 8 proportional encoders… where you actually have to take your hands off main controls to operate 7 and 8. Don’t like… The rest is nice upgrades

Gday Harry. With the future wifi/bluetooth updates do you think the tx can be updated and programs installed with only using your phone and not needing a computer at all?

Hi Harry, I just received a DS-24 and confused after watching your description of the difference between old and new. My Tx has a front face like what you indicate is new, yet controls on the side and back like the "old"? Not sure what I have... bought it from JETI as a "demo" unit. Jerry

Quick question, I know is too early to tell, but is the silk-screened lettering improved adhesion? The V1 is known for the lettering/numbers to peel off on the carbon fiber panels.

Hi, nice video. Can I assign the buttons on back for the nose wheel trim instead the rotary knob?

Thanks

Thanks Harry, as a jeti owners we'd be lost without your vids, Wonder why jeti deleted the two sliders on the back and more importantly the two sliders on the side ,can you adjust the movement tension, thanks

Thank you Harry. The new gimbals are a surprise as they were not included on my DC-24II. Very nice to not need to remove the back for gimbal adjustment!

Thank you for the video! Does the software have the same bug than the DC 24 II with expo and dual rate?

Hallo Harry, vielen Dank für die tolle Gegenüberstellung; liebe Grüße auch an Monty. :)

❤Great work Harry, thank you!

Sorry Harry, but Monty steals the show 😂😂😂😂

Hi Harry, best regards from germany 🙂

Apps Sources for Apple users is under JETI-Studio menu > Preferences > Apps sources tab 👍

Great work. You fellows are exceptional .... Thankyou

Thanks Harry. More examples of the outstanding capabilities of the Jeti system.