Jeti - setup and transfer models to new transmitter

[@Roro-jf1bz]

Hello Harry, thank you for these video. There is one thing that might be interesting for many Jeti users who need to change what transmitter their receiver is bound to. While the common method is to connect the red "Bind Plug" to the receiver, there is another method that, in my experience, not many people know about. Here are the steps: 1. For safety, remove any props before proceeding! 2. Turn ON the already-bound transmitter (let's call it Tx-1) and the receiver in your model. 3. On the Jeti-Box Emulator on Tx-1, navigate to the receiver menu: “ ”. 4. Once there, continue to the menu showing the connected receiver type (e.g., “ Duplex R5 EX >> ”). 5. Inside that menu, you will find >. 6. By pressing the Up-key, the receiver will enter the pairing mode, just like when using the red Bind Plug. 7. Turn off Tx-1 and turn ON the new transmitter. The new transmitter should find the receiver and bind to it (a timer will display, showing how much time you have left for binding). This method can be especially useful when a receiver is difficult to reach inside the model. For more information, you can visit: jetiforum.de/index.php/4-jeti-sender/6731-uebertragen-der-bindung-mit-hilfe-von-paring

[@cotswoldpilot]

That is a good point to raise. It saves trying to get a bind plug into a receiver that may be in a place that is hard to get to.

[@tedean1]

Thanks!

[@cotswoldpilot]

Thank you very much for the donation, much appreciated. Harry

[@tedean1]

@ I am new to Jeti. Your videos are invaluable and very much appreciated.

[@michelg3575]

Hello Harry, the first thing to do is to make a backup of all the files of the new radio in order to be able to return to an original configuration. best regards

[@cotswoldpilot]

@@michelg3575 good point michel

[@fredrik-cm4kl]

Hi nice video 😊 can you add the site to get that free text to speak generator! Have a great day

[@cotswoldpilot]

www.rc-thoughts.com/tts/

[@AN-ce1nd]

Where is the touchscreen? Passing on it, getting the PowerBox. Jetti is from the 1990’s. Pure garbage

[@Roro-jf1bz]

Hello Harry, thank you for the video. There is one thing that might be interesting for many Jeti users who need to change what transmitter their receiver is bound to. While the common method is to connect the red "Bind Plug" to the receiver, there is another method that, in my experience, not many people know about. Here are the steps: 1. For safety, remove any props before proceeding! 2. Turn ON the already-bound transmitter (let's call it Tx-1) and the receiver in your model. 3. On the Jeti-Box Emulator on Tx-1, navigate to the receiver menu: “ ”. 4. Once there, continue to the menu showing the connected receiver type (e.g., “ Duplex R5 EX >> ”). 5. Inside that menu, you will find >. 6. By pressing the Up-key, the receiver will enter the pairing mode, just like when using the red Bind Plug. 7. Turn off Tx-1 and turn ON the new transmitter. The new transmitter should find the receiver and bind to it (a timer will display, showing how much time you have left for binding). This method can be especially useful when a receiver is difficult to reach inside the model. For more information, you can visit: jetiforum.de/index.php/4-jeti-sender/6731-uebertragen-der-bindung-mit-hilfe-von-paring