Thank you so much, not for kids lolz, but it worked great for my work bag and the dogs stuff
@saulbarron5637 күн бұрын
I just did the same 3 weeks ago nd oh man it was pain in the butt
@lvp806816 күн бұрын
A little wind and this goes bye bye…. No attachment to the ground?? Where i live there’s a lot of wind. I’m already thinking how am I going to secure this to dirt ground. Maybe create a cement base with brackets.
@FowlersFarmhouseMore16 күн бұрын
@@lvp8068 it does come with ground anchors and i did utilize them. Just not in the video
@ThongbayChanthanalay19 күн бұрын
Good 👍 to show but white guy listening to Blackass music 🤪
@travis231819 күн бұрын
Built one for a friend yesterday. The self tappers were horrible. Some were bent outta the bag and a lot of the heads kept burning off
@SpeedyCotton55Ай бұрын
Damn good video, thank you sir.
@tsjunoАй бұрын
It’s so much easier to assemble them on the ground and pick them up in one piece. You only have to worry about getting each side in the bottom and you are not up on a ladder driving those screws.
@Falcon47-47Ай бұрын
Is it okay to store the saw in the vertical position long term? I have found some stands say not to keep the saw on the stand vertically in storage.
@FowlersFarmhouseMoreАй бұрын
@gorilla11100 won't hurt the saw just make sure you zero it out before using it
@MikeBCNUАй бұрын
Thanks for the video entertainment... especially putting prego mama to work :) --- btw had you used the fiberglass ladder from the start you could have put the uppers on in one piece...lol
@FowlersFarmhouseMoreАй бұрын
@@MikeBCNU I didn't have that ladder from the start unfortunately
@hemi1430Ай бұрын
I am waiting on lowes delivery for this. I think I am going to assemble the walls and rafters before installing to the rails, though. Watching all that up and down the ladder made me tired.
@birbbirb6078Ай бұрын
Building one of these right now, the roof is a bitch haha
@tomhutson2460Ай бұрын
The music is too much of a distraction
@dmayer50Ай бұрын
What’d ya say!
@rhettcollins86822 ай бұрын
OK, I was just going to hire someone to do it. Not now!
@dn61272 ай бұрын
I think it is better to assemble the arches first. With all those drilling.
@Cotton6032 ай бұрын
Are there pre drilled holes or are you self tapping all these holes
@FowlersFarmhouseMore2 ай бұрын
@@Cotton603 self tapping
@TM-hk3ic2 ай бұрын
Good Video (Skip music next time!) Were you using a 1/4 or 3/8 drive drill?
@aat3tville1812 ай бұрын
Thanks for the how too and for not drink bud lite
@passionfruitpassionfruit20343 ай бұрын
Will this carport withstand hurricane forced winds in Texas
@FowlersFarmhouseMore3 ай бұрын
I would assume not.
@xcesarxramosx3 ай бұрын
Only way to finish a project 🍻
@A2ZREY3 ай бұрын
My 03 lb7 get like 10 mpg how do I get more I see people Getting like 28
@rra0220013 ай бұрын
Ok..but for some, best to mute the volume.
@jonathanmagic56334 ай бұрын
Greetings from Australia where I'm about to do mine solo as well, very helpful thanks.
@CovenantColors4 ай бұрын
😍 very High Quality!! Great Work
@crebo66905 ай бұрын
Do you a video on how to remove the dash board, I want to replace the dash since the airbag popped
@FowlersFarmhouseMore5 ай бұрын
Unfortunately I didn't do a full break down, and I no longer own this vehicle I'm sorry
@jeffb95865 ай бұрын
Excellent single person execution of a possible two person job sir
@lynnamacaibay11615 ай бұрын
What’s holding it from blowing away?
@FowlersFarmhouseMore5 ай бұрын
Ground anchors.
@tula71415 ай бұрын
Less music. More beer.
@mr.s.s.20505 ай бұрын
Great video, You made it look easy, sir.
@domjuan41696 ай бұрын
Nice video horrible music
@blueline3086 ай бұрын
Why the jig music?
@FowlersFarmhouseMore6 ай бұрын
Why not ?
@Pontiac68786 ай бұрын
And that's the bottom line...
@taylorfisher75086 ай бұрын
Do they need to be full of fuel prior to installing?
@FowlersFarmhouseMore6 ай бұрын
No, leave one a little lose when you first turn the key and it will purge the air but be ready to spin it tight
@Jeffro23_Ай бұрын
I have an Lb7 duramax which has the issue of injectors getting dirty fast. So I actually fill the fuel filter (not the water filter) with fuel injector cleaner and let that idle thru for about 5 mins. Replaced my injectors about a year ago at 200,000 miles and don’t want to have to do that again anytime soon.
@dalyruiz11887 ай бұрын
Can you share what you used to stick the stencils, paint, wood measurement etc…
@Zahgurym7 ай бұрын
Gotta disagree on one point.. I definitely prefer the roof of the truck over any ladder. Lol
@louispalmieri19807 ай бұрын
what i liked was you did it your self
@markseifried39598 ай бұрын
Thanks, I may have put the bolts in the wrong holes, but I found the directions for assembly poor. I ended up using some of my bolts and nuts to finish the assembly. It seems like a fine cart.
@ChrisWhitley-tx1oz8 ай бұрын
I ran machines for Arrow. In the shop we had to hold a sixteenth. Out in the field they went with somewhere in the area of the two holes.
@blueyedmomshell8 ай бұрын
What’s your favorite spray poly? Thanks!
@nonyapersonal84689 ай бұрын
Lose the music
@FowlersFarmhouseMore9 ай бұрын
No thanks
@rebelangel82279 ай бұрын
i just bought one of these stands to go with a new dewalt 78 and this stand wheighs more the mitter saw...pretty sturdy so far...i like it more than the aluminum basic frame that everyone keeps buying where i work
@t2squared9 ай бұрын
That was a really good assembly video. However, the music sucked big time. I literally turned off the sound. Next time skip the music. Your video was good without it.
@MrMiller12310 ай бұрын
How long did this take to build?
@FowlersFarmhouseMore10 ай бұрын
Just one day
@swatrivera434710 ай бұрын
🎉
@StanleyWhatley10 ай бұрын
The anchors have been mentioned previously, you didn’t include the tape for the top panels which helps with leaking.
@paulbetka647711 ай бұрын
I couldn't watch. 🥺🥺🥺🤪🤪🥴🥴👎👎👎 Assembly ass backwards 😡😡
@Fishingaddict50311 ай бұрын
Is this the 9ft height?
@FowlersFarmhouseMore11 ай бұрын
I don't remember but it is the taller option they offer
@Jkcreswell6 ай бұрын
Looks like the one I’m purchasing. 146-inch width x 238.2-inch length x 105.5-inch height.
@sassafrasinspired202911 ай бұрын
Thanks for showing how it's done (especially the beer-chugging!) My daughter and I are looking to do it ourselves and I wasn't sure if I'd be up to the task, but I think we're gonna do it after seeing you handle it alone. I appreciate your time and effort to share the build.
@yeahnoonecaresifyouarefirst Жыл бұрын
Please use a mask excess protection never killed anybody