Great video! Wow it is so loud , i will stay with my moka pot for now, otherwise my wife will kill me in the morning )))
@andrewcarnill474925 күн бұрын
I own this machine and am having an issue with overfilling and no steam at the steam wand. The boiler heats up to temp and creates pressure but no steam and then over fills. I already replaced the pressure stat still having the same issues. Any advice would be great. Also, where did you get a replacement Gicar controller box? Thanks!
@ozespresso17 күн бұрын
It could be a bad fill probe or ground connection to the controller. If that is not the case then it could be a controller issue
@fabianduss79342 ай бұрын
Thank you for the video! Any recommendations how i can calibrate the preassure? Mine only makes around 6 bar...
@ozespresso2 ай бұрын
Hello, depending if you refer to the steam pressure or the brew pressure. I would recommend contacting tech support from the shop/online store you bought it or one that sells it and ask.
@bogiesan2 ай бұрын
Will you be reviewing or demonstrating the new mina?
@ozespresso2 ай бұрын
No sure yet
@Mario_641602 ай бұрын
Movies free
@jolynnelockley90132 ай бұрын
It would help if you showed the gauge during the process.
@martingonzalez33283 ай бұрын
SE le quemo la Resistencia a mi mini Wega WX. 1400W,110V.como lo compro.
@petetaylor20003 ай бұрын
Very simple to follow. A great help. Thanks
@lubnaal-ani32064 ай бұрын
Although, I followed what you mentioned, it keeps pouring too big of a shot. It pours about 500 ml for both 1 shot button and 2 shots button. Do you think it's fixable?
@ozespresso4 ай бұрын
There could be an issue with the flowmeter. Call Breville customer service
@777interesting4 ай бұрын
Great explanation, thanks, cheers .............
@TanyaCuddy4 ай бұрын
Hi, any service engender in Uk ,Devon?
@CandyMiller-i4x5 ай бұрын
I wish you could help me no espresso is coming out company is not helpful
@andreagiovannetti67946 ай бұрын
Hi, another question if you don't mind: I noticed that when I fill the water reservoire by more than 1/2 its capacity, water spills from the machine floor (out from the power chord hole). I am using filter water. What is happening? thanks!
@andreagiovannetti67946 ай бұрын
Hi guys, is it possible to fit a PID on ECM Giotto? Any way to reliably measuring the temperature?
@ozespresso6 ай бұрын
Hello! In theory, it is possible but it will require some work and parts. We don't offer this service but have seen some videos on how to do it.
@andreagiovannetti67946 ай бұрын
@@ozespressoI have been recommended against installing one because it would require an irreversible altering of the machine. As I am happy with the current state of things, I guess I will not work in this direction! Thanks for the honest comment though :) I was wondering if there is a way to get pre-infusion done with this machine. thanks!
@robertshetsen86916 ай бұрын
What about double boiler or heat exchanger
@robertshetsen86916 ай бұрын
Which Machine would you reccomend as the best to use
@ozespresso6 ай бұрын
Hard to answer this one, it really depends on the user and the favorite drinks to make in my opinion. I like using La Marzocco, Rocket, La Pavoni, and Rancilio for the most part as they have good quality control and good customer service, with can really help in the long run.
@Coffeeluver227 ай бұрын
Didn’t see you turn the switch on and many say prime through steam first so but confusing which one is right.
@FranciscoParra-du1dc7 ай бұрын
I was wondering if I should buy a La Pavoni. I don’t think all these “experts” are helping the company. If anything it just makes it look like a big risk to buy one of them. I remember using a lever espresso machine many years ago, may have been a la pavoni but the shot was awesome regardless for a first time ever. I didn’t even know there were this kind of espresso machines (much less using one) and I fell in love with espresso because of that shot. Now, I don’t even know if I should get one. This “experts” make it look like rocket science. For now I am just going to stay with my No-lever espresso machine. Oh well!
@Kementiri7 ай бұрын
I bought this when Starbucks first started to sell these. I am STILL using it to this day and it's amazing. Nothing has ever broken on it.
@ozespresso7 ай бұрын
Great to hear!
@Chappomusic7 ай бұрын
How do you open the sprout when already taken from the machine ? Don’t want to break it .
@ozespresso7 ай бұрын
Hard to tell depending on the model, try contacting Jura-Parts.com I think they also have videos about it
@wheelheat17 ай бұрын
when I turn on my machine only the program light comes on
@carmietatertots99007 ай бұрын
Thanks for showing how to help the water get through when the grinds are to fine, and to know when you have to much pressure. This was very helpful.
@elirang228 ай бұрын
I have a question I have the same machine... I put the steamer on 126 c I like to know how much you put the steamer thank you very much
@ozespresso8 ай бұрын
It usually set to 2 bars of pressure by default from LM. usually 259F- 265 F is a good place to start and then you can see what is the pressure on the gauge. Hope this helps!
@obsessedcloset26388 ай бұрын
Looks lovely mate but the GS3 is so outdated for the price. I’ve had three LM machines and adore the brand but the MP I found so infuriating to use and the water wastage.
@SimonRousseau18 ай бұрын
not having a full hopper makes it grind really slow and inconsistent.
@funwithmyswedishdogs8 ай бұрын
I have a question. I have descaled my barista express and now the pressure is gone.
@ozespresso8 ай бұрын
It might got clogged, hard to tell without testing it, also could be the pump.
@YoYoD49 ай бұрын
very cool
@CuberPillar9 ай бұрын
Hi! Thanks for the video! By any chance, do you know how to fix a problem when coffee/water is not coming out from the nozzle? I’m thinking that the nozzle is blocked, have been trying to clean it - no luck. Thanks!!
@ozespresso8 ай бұрын
Sorry for the late response but it will be hard to know without testing it, try cleaning the nozzle with a toothpick.
@diane68529 ай бұрын
Appreciate your simple but very helpful video. Thank you.
@ozespresso9 ай бұрын
Glad it was helpful!
@philindeblanc9 ай бұрын
The gauge is not stuck it just stops at last pressure, then resets when pulling another shot. Those wood panels are nice!
@elirang229 ай бұрын
Beautiful review thank you very much ❤🙏
@ozespresso9 ай бұрын
Thanks for watching!
@menamgamg9 ай бұрын
When i turn on the coffe switch on my machine, there's no water coming out and the pressure meter does not move. What could becausing this? Ive confirmed that the water pump is working.
@ירוןשניידר-ע3צ10 ай бұрын
How to make backflash?
@amirson857710 ай бұрын
I have issue how I can contact you
@philindeblanc10 ай бұрын
can you explain how the stainless steel 3 way valve is supposed to sit? my machine is leaking from there. i thought maybe the 4 screws were not tight enough, but they are. I would like to know where I can get a extra green drop shape gasket also, but I think it is leaking because its hard to tell which way it is installed, and I have it on the wrong way. Reply
@ozespresso9 ай бұрын
I can't remember but the orientation is important, you can call the tech department of Clive Coffee or Chris Coffee and see if they can guide you through the process.
@philindeblanc9 ай бұрын
I figured it out. There is a dot on the flange and that has to point up, and in my newer valve thats all stanless including the flange, it gets the pointy part of the DROP shaped gasket to point to the user.Thank you regardless!!@@ozespresso
@usmanabdullahi687110 ай бұрын
Y
@usmanabdullahi687110 ай бұрын
😊
@predragradnic49810 ай бұрын
To give a 1150e for Rocker Appartamento in 2023 is one of the most stupid things you can do!!! Huge money for mascine without PID, without brew preasure gauge and very average built. After my Gaggia Classic Pro iI bought Appartamento and I made a misstake
@MrMechislav6 ай бұрын
And what is 1150e?
@EdicksonRoa-zm4um10 ай бұрын
Tengo una wega mini Nova lleva un interruptor adentro por el lado derecho.... El debe están encendido
@EdicksonRoa-zm4um10 ай бұрын
Tengo una wega mini Nova lleva un interruptor adentro por el lado derecho.... El debe están encendido
@audia30610 ай бұрын
Hello my Jura A1 turn on then turn off with all flashing symbol and turn off
@M_C7910 ай бұрын
Edit: I tried you idea of running citric acid through the machine and it WORKED! Thanks!
@ozespresso10 ай бұрын
Awesome!
@SurJones11 ай бұрын
how do you update the firmware?
@LondiniumEspresso11 ай бұрын
Lever
@box7781 Жыл бұрын
I just received my Appartamento and the light turns green but within about a minute it starts to flash three times and pause and repeat. What is this indicating? I am using well water with lots of minerals so it should detect the full tank. I have the feeling the heat exchanger isn't pulling in any water and is tripping an overheat sensor and giving me the error code. Should the water in the tank drop when it is first initiated? I reached out to SCG yesterday for 46 minutes on hold and then they hung up on me. I should have done better research on where I bought from. So frustrating.
@ozespresso Жыл бұрын
This sounds like a "stand-By" mode is ON. Look for a little green button under the machine and press it. See if it solves the issue. Good Luck!
@box7781 Жыл бұрын
You had me excited for a moment but unfortunately that didn't resolve it. SCG claims the boiler is not loading with water and needs to be returned because they cannot troubleshoot it. UGH :( @@ozespresso
@diecisesti Жыл бұрын
where can i find that boiler pressure gauge?
@ozespresso Жыл бұрын
Stefanoparts in Portland OR
@Maha_s1999 Жыл бұрын
Ok but apart from the clogging issue, where are the tips?
@andrewr3403 Жыл бұрын
I wish i would have gotten my machine from you guys honestly after seeing how much you do for your customers :/ Do you have a website that you use for people to puchase products from you? Do you descale machines?
@andrewr3403 Жыл бұрын
Awesome video!! I just got one In the manual is says to water back flush daily and chemical back flush once a week. Is there anyway you could make a video showing up to do that?
@ozespresso Жыл бұрын
There are plannty of videos about how to backslash E61 group heads, good luck!
@baba98052 Жыл бұрын
I have had this machine for 12 years, and totally awesome. This is made in Washington, and parts and service are excellent.