Which video shows the addition of the bracket to drill the holes into?

One half table spoons vinegar? Everywhere else says 1 part vinegar to 2 parts water and some say 1 to 1???

Hi Dan. And Happy New year! I'll just looking into buying the SACD but I'll have to import it at its not available easily here in the UK. Just wondering if you can explain how you are streaming the SACD and connecting it all up in your sound system? I couldn't quite get it from what you were saying.. thanks in advance

If KZbin goes down, im stuffed. I look up this vid every time the clean light cones on!

Thanks mate

Get a Makita/whatever battery adaptor so you can put in whatever you usually use. I had to loosen off the battery compartment screws about 1 turn to he able to fit the bigger footprint.

I did the first half my apprenticeship as a diesel mechanic at Toro commercial. I have set up so many reel mowers in my time, it's not funny. The trick is to get it to cut the paper without the reel actually touching the cutter bar. If you can't get it, then use some lapping paste and run it backwards. Possibly with a cordless drill.

Back once again for the same tutorial 😂

When I was an apprentice diesel mechanic, I worked at toro commercial. We used to sharpen the reel mowers so you could cut a piece of paper without the blades actually contacting each other. BTW. It sounds like you need to back off the preload a bit at the end.

What species of grass is that?

It is crap but ok… It doesn’t cut low enough!!

Are any kind of coffee machine tablets fine for the sunbeam? And what are some alternative cleaning products I could use instead? Thanks

Nice!😎✌

I need this .

Snake oil ....

It appears the product is a power line filter to reduce power line hissing noise at most. There should be no change in the audio as @RadiationNetwork pointed out. To test your changes, you will need to record the audio out of your HDMI receiver with and without the adapter inline. Plug an audio wire from the back of the receiver back into your PC and record both. Then you can look at the wave form to see if there is an actual difference or if the placebo effect is causing the auditorial difference. Open the device and show us the insides. Would be interesting to see what is actually in there.

Worthless scam product! I would say you were scammed but you probably got it for free for a review. HDMI is digital, the audio is digital. Products like capitalize on misconceptions about digital signals. The way HDMI works is by transmitting a series of 1s and 0s, meaning that there is no gradual signal degradation like with analog signals. Either the signal is good enough to display perfectly, or it fails entirely, resulting in obvious errors (like screen artifacts or no picture at all). The concept of "clearing up" or "enhancing" a digital signal to reduce "noise" doesn't really apply here. If anything, adding a third-party device like this could introduce more points of failure, potentially causing signal interference, latency, or degradation if not implemented properly. Additionally, terms like "active noise cancellation" and "jitter elimination" are more relevant to analog systems and do not have much real-world impact on HDMI audio/video. In a well-functioning HDMI setup, jitter or noise isn't something users should worry about. This product preys on technologically illiterate users who don’t fully understand the differences between digital and analog signal processing.

With respect, why are you interested in improving video when you watch a projector. Also, is it possible that the iSilencer just has an exciter effect (eg. 5K) in it?

Hey mate, just want to say thanks. Your video came in very handy. I live in Oakleigh right next to Richmond store in Clayton. Thanks champ.

Thanks m8. Another interesting video.👍 Have you already upgraded the Apple TV power supply?

I use a USB power bank and it's CLEAN with zero noise. Did you mention how you're feeding the DAC's with music? Over USB, Optical or Coax? If over USB then you can bump up the quality well above 44.1. Mine is 384 on my E30 version 1.

The drive belt on my mower broke , Bunnings weren’t interested, Ozito weren’t either , they do not stock spare drive belts , I was lucky to find a drive belt stockists who found a replacement belt , cost $47 , so I got 2 just in case I break another one

Hello, Good content, can you tell me what type of cable have you used from your dac to your av receiver to get the 192 khz lossless? I was looking to get somthing out from a usb dac (that pulles 192khz) into av receiver. Or can the dac built in the av receiver can send lossless 192 via speakers bypasing extenal usb dac ? Thanks

Do you think it would be possible to modify it to take the cut height lower than 14mm

I have Gustard x16 dac and fil audio Streamer. I connected the streamer to the dac with a USB cable. I also connected the Dac to my Klipsh the fives active speakers with an rca cable. When I turn on music from the Streamer app, there is no sound. The screen on the dac shows “dsd 24.5mhz” and does not change at all. There is no signal from the Streamer to the dac. What could be the reason? Does the USB not work? Is USB 2.0 depowered to carry a signal? Do I need to update my Gustard x16 dac?

Any particular filler is good for the job?

Why did your portafilter look like it dettach itself @1:23?

Good info on how to take the wheels etc off , I jammed a stone in my mine and now it won’t engage , so I’ll take the wheel off and see if I can find the problem

This is awesome. Thank you so much for this! I just went all the way through it to clean mine because I bought it secondhand and didn’t have instructions and it was a lifesaver. Thank you so much! X

Hi Dan, another great video! My ears aren’t very golden (I’m no audiophile) and I was only able to listen on my Bluetooth (AirPods Pro2) headphones ,but I definitely thought the e30ii seemed less laid back more forward and a bit louder. Still enjoyable though and really not that much different from the original. However, that could entirely be down to both KZbin and Bluetooth compression. Personally, I really like my chord mojo2. I wish I could let you try it, but I’m on the other side of the world. Also, because I’m in the U.K it was much cheaper to buy (£350 on sale about $680 AUD) than it is elsewhere in the world, and that made it a much better proposition for me, than it would be for international customers. There’s actually many direct rivals to the mojo2 I would have to spend much more money (£200-400) to get here in the U.K that are a very similar price to the mojo2 internationally. Sorry for another question, but in your personal opinion, do you think a lower cost linear power supply would still be a sonic improvement over something like the ifi power2? All the very best!

Hi Dan great informative video. I like your honest and friendly presentation. Not enough friendly audiophiles in the community, unfortunately. I was hoping you could help me out? I can’t find the actual cable length online, not even on their website. Ideally, I need them to be 2 meters or more to fit in my wiring loom. I’m perhaps looking to purchase two, one for my WiiM pro and another for my Mojo2 Dac. I’m also upgrading my powerstrips to Tacima CS947 conditioners at the same time. Obviously, I completely understand if you’re too busy, as this is an older video, and I’m very late to the conversation. P.s you have a beautiful country and I’m always shocked by how open, friendly and talkative most the people are! All the very best from the other side of the world!

Thank you for this video. I am another who always comes back to it when it's cleaning time!

I looked.up the roller.on Richmond's website. The sku is CRR007. It actually is zinc plated, not stainless which makes sense as its only about $22 including GST. There is a stainless option. It's closer to $50 all in. For the record as soon as I said what I was after the guy said you've got an ozito mower, don't you! He's seen this video too. 😂

I was up stairs. So glad i came out!

G'day Dan, I've searched a lot of videos until I came across your video. Would you kindly help me? I believe my garage door opener is the same as yours (Steel-line SD800). I am trying to connect a (Hikvision Relay) to it. Basically my question is: Does it matter what + or - to connect when connecting the "push Botton" wire to "receiver"from the relay? in your video I can see there is one blue and one brown cable for door sensor which I don't have on my door, then you have one tiny blue and white cable which I believe is for "push button". My question is if you swap the blue with brown, would that damage the sensor? or if you swap tiny blue with white, would that damage anything? I appreciate your response. Cheers, Kaveh

Where did you get the S/S roller please

do you have the directions to extend the length of the handle please

Have you ever tried to ad some extra weights to make it cut lower ?

Loved the Caleb moment

Thoroughly enjoyed this video!

Do you recommend this for commercial use?

Very helpful. Thank you.

Fust found this so helpful for my new (second hand ) Barista Max. Q. Why does the grinder light flash?

Dear Dan, Please don't run Bluetooth from your ipad to your gustard. That's just horrible. if you had an android device that supported LDAC that's at least near lossless but ipad is limited to the horrendous AAC codec which is like 300kbps. Basically, you're getting MP3 quality. If you run a USB connection from a suitable device the sound quality will improve absolutely massively.

Put a Pyrex bowl under it to catch the cleaning water - saves any overflow and it's a chance to see what's being cleaned out. Denture cleaning tablets are much cheaper and more effective.

Thank you!

G'day Dan Can you let me know how you made the roller please? Also, noticed you recent video on the ozito rotary mower and you mention about the clippings from the cylinder mower flicking out which caused build up, would you not recommend the cylinder mower for Kikuyu? Cheers Matt

Hi Dan, this is a lovely video, very informative. I am thinking of getting a Wiim Pro Plus Streamer, will this make a difference in SQ output? It's going to go through my Marantz Cinema 70s. What is your honest take on this setup? Best Regards

Please don’t ever delete this video. I open it every few months to clean my machine. ❤ you explain way better than the sunbeam manual

How do l take the top off. As itlesks a lot of water