Thanks mate took me 5 hours but it is done

I have p420 bank 1 , does that mean only i need one spacer upper right the catalyst filter? I have gs350 AWD

i installed mine, and everything works great except my left headlight doesn't have sequential and the animation working? Would you know any reason why? PLEASE HELP! thanks

Incredibly helpful. Thx so much.

Great job!!

❤❤❤❤❤❤❤❤❤❤❤❤❤❤

So what is the part number of the updated battery version that doesn't swell? My 5530 is out of warranty so I want to buy the battery myself, possibly with the smaller capacity (shorter version) one.

60 psi is when the tire store sets the tire to the rim with a air compressor max psi. My hand book says 35 psi. Check the reading on the tires all of them. My tires say 51 psi, but its set back to 35 psi after they are installed by the tire store. Call any tire shop for more information

I wish you had a shop. I'd have you work on my car anytime.

Hey great video!! Very helpful! Had a question tho I’m changing my transmission on my 2004 Lexus is300 I already drop the old one and have the new one in but when I go to try to turn the crank so I can torque the torque converter bolts in it won’t turn any reason why?

What’s up man. Been watching a lot of your is300 videos. Awesome channel

Bro can you post the link to where u got the bumper I’m looking for one but can’t find one

Thanks for video you made my job too easy. The work you put into the video seems 10 times harder than the transmission job.

Hello!! Love the videos. I have a 2014 avalon xle, and was wondering if you can make a video about redoing the dashboard below the windshield? Mine is all shiny and stuff, and it leaves a horrible glare.

Can you just pickup an OEM fog switch and use that?

When I've done rear mains as a pro mechanic, I made a technique that results in a perfectly flush seal and is easy. I just used oversized washers on the flywheel bolts at each of 4 corners and tighten them down in a star pattern. Done. If you're doing it with the retainer off the car... Just use a dead blow hammer lightly around it.. No wood or weird pipes needed 😅 You used way too much gasket sealant.. You need to pit a bead and tap it lightly with your gloves finger. Otherwise you could get a clog

what emblem did you use? did you need a grill weather strip?

Thank you i got 3 sets of counterfeit plugs on ebay. Bullsh**

Which one should I use for my Lexus is f sport 2020 ?

Does it work for Honda civic 2025?

Damn, you making me spend more money 😂

Thank you. Order mine saved about $300 because the Lexus deal wanted $250 for the key and $75 to cut the key. Then another $250 to program it. I bought mine on eBay I paid to get it cut then bought the toll on Amazon.

A lot of extra stuff and I wish you didn't skip cracking open the case, but it helped me with what I needed to do. Thank you!

Finally, a guy who cools the air BEFORE it goes into the main tank...good job. Now add an auto spitter and that water in the first separator will be maintenance free.

Thanks for giving all the tips and trick when you did the video

👍

Thanks for the info Do you have any crew about motorcycle keys

would this work on a 3rd gen is250?

Mine Lasted 3 Years

Phosphoric acid works better

Get a powerful charger. Or a 14v power supply. Connect the negative to a inox plate. Immerse the plate in distilled water and pour the hardware on top. You connect the positive to a nickel plate and power it all without creating contact or short circuit. You will create a very resistant nickel plating.

Alignment should always be measured with the suspension loaded with the vehicle's bodyweight!

Do work on Yaris 2019?

Thank you

This will not work with limited model with jbl system. The srs board it part of the whole unit on the jbl synthesis. Had to reinstall the factory unit bc airbag light was on

Where are you ordering your parts?

Very nicely done simple video!

Came across your video and was wondering if you know anything about mileage on the odometer not changing when driving. I recently picked up a SportCross and having trouble with the odometer. The mileage is not changing as I’m driving. Everything else works like the trip A&B,speed,rpm etc. Any help will be appreciated. Thanks.

Question for you, The pulley part with the bearing inside, is it normal it has a little tiny bit of wiggle? Did your compressor pulleys have any play at all? (your old or your new one) I'm planning to replace just the bearing inside the pulley because I feel a little tiny bit of play. But the play I'm observing is really minor and I'm wondeing if it's maybe just the Original play and the way they are from factory. Because I have the radiator out, etc, that is why I thought I check all the accessory pulleys and I noticed this.

Thanks, man! Because I just accidentally broke my cousin's shifter plate cleaning on his 2010 Lexus IS 250. You are very helpful!

You can also buy strong suction cups for car dent removal, 2.25inch & 4.5inch. they are marketed for electronics screens, tablets, home diy also. Very inexpensive for non destructive teardown. Great video 👍🏽

All you need to do is insert a few plastic cards to pry up a clip or two, then use strong suction cups to pull of the case. You can attach as many 40-50mm ones as you can fit. Less destructive than prying open.

Aww man this looks like a pain in the ash to do yourself. Thanks for the video but I think I’m SOL

Nice. Great vid

Do you really have to remove the plastic pieces and put the mat under them? I've seen videos where they don't take them off and it fits perfect. Seems a little too much, and if you want to take the liner out to clean it, you have to take it all apart.

Gracias . Muy util

I think putting the reflective roll first then the form board (with aluminum side face toward inside) will be more effective for summer and winter...

Chao anh Binh, thank you fro the video. Do you think I can remove and replace bushings by hand with manual press or clamp?

Great video! What size is the whip you are using from the compressor out to your secondary set of air/water separation?

im confused about the rotor part? I wanna do this to my 2011 is250 AWD but I cant use is350 rotors?