Aren't those coil racks rated for only 10k each? Don't you need min 5 of them for that coil's weight?
@erinpresley9374Ай бұрын
The link isn’t working- it navigates you to your Amazon account to log in & opens to your current orders.
@user-mr3jd4bf3m2 ай бұрын
You need to stagger those ratchets girl on one side not good
@MrBlazinstar222 ай бұрын
Listen get off the road please.....theres so much wrong with this securement its crazy...technically by FMCSA regulations you dont have it secured at all... For starters if its a 45k lb coil then it should have 5 coil racks not 3 not 2 not 4 who told you that? 1 rack for each 10k of weight Secondly you have 2 of your chains hooked to the RUB RAIL not the trailer are you mad? THOSE DONT COUNT AS SECURMENT also you have them wrapped around spools (the round piece thats welded in connecting the rub rail to the trailer between the stake pockets) You can teardrop chains using a stake pocket and a spool or just a stake pocket alone but you can't simply use a spool because its welded in. You gotta be safer out here man this stuff aint a joke i been doing it 8 years
@ellargudo57502 ай бұрын
vehicle speed sensor😊
@faafo94782 ай бұрын
You need more chains holding it from rolling forward. And your chains need to be at least at a 45⁰ angle from the coil. Those chains in the center I'd move them. Just my opinion
@edgar123tube3 ай бұрын
8,000 pounds limit on each chain and same with coil racks. I would put 2 chains in the middle, 2 to the rear and 2 to the front.
@fenixvlogs86663 ай бұрын
Bro because of you I literally found the turn signal fuse ty
@andrewsmart29493 ай бұрын
shorted
@tmonnmiles3 ай бұрын
Keep making videos bro, love the content. Subbed!
@kroozkatool644 ай бұрын
I got a mini Hisense fridge it does go on but every time there is a click and it switches off so I need to know what's needs to be bought also the compressor gets too hot
@bxp16965 ай бұрын
Wouldn't it help if there were two more logs (not sure of the official name) placed for redundancy? I know that's not being done but is there a reason? Just curious. My logic is even if it's able to roll over the first log, the second set of logs on track could be just enough to slow it down or stop.
@David-up7rv5 ай бұрын
YES OL SCHOOL BINDERS AN CHAINS BUT YOU GOT THE SLACK OUT OF THEM. GOOD JOB 👍 SAFE TRUCKEN TO YA.
@denningmp376 ай бұрын
One of these coils just flew off a truck and killed somebody maybe it’s time to consider a safer transport method
@r.l.mashburn48516 ай бұрын
Outlaw binders ! 😮
@markboyce10016 ай бұрын
Everything on that coil is wrong, you do not hook your your chains to your guard rail, the chain has to hook into itself, plus there no steel edge protection from the chain to the coil
@outwestexplorer19666 ай бұрын
Something else I do when I haul coils is I take 2 straps will put them in x pattern to help hold a large coil. Never to much securement especially hauling these.
@BiggTyM106 ай бұрын
Supposed to have at least 4 coil racks bruh. 2 for every 20k
@fuzzybutkus89706 ай бұрын
Guy loading that big coil gets it. It’s not about us or who or what they were. That’s a tough dangerous job. There used to be a begging bit of mercy. The Millcreek truck was right behind me. But decided to really slow it down near windows. They got it going a lot. They are in love and wanna see their son preferably in 90 days told me everything.
@antjohnson37246 ай бұрын
This shit about to put me out of business. I put over $16,000 in this mf'er over 3 years and now it won't go in high gear! Trash
@WeaponizedTX6 ай бұрын
I was pretty sure DOT had outlawed that style boomer.
@wulfffpv6 ай бұрын
I would feel safe behind you. You do good work. Safety first.
@wulfffpv6 ай бұрын
Looks like from reading from truck drivers below I might not have a clue.
@BruceHutto-cw6go6 ай бұрын
I’m not a truck driver, but why wouldn’t it make sense to load it on its side? Seems it’d be a lot more stable?
@experimenting81746 ай бұрын
Wondering the same
@7z7206 ай бұрын
Depends how the customer receives the coils, some customers can only offload the coils a certain way so they must be placed in accordance
@BiggTyM106 ай бұрын
Can't lift it like that. A lift or a crane picks it up through the center hole
@experimenting81746 ай бұрын
@@BiggTyM10 ok but why can’t the crane align the hole parallel to the long axis of the truck? Couldn’t the truck just approach the crane sideways? Not a trucker, clearly, just can’t understand why on earth there isn’t a way to do that
@BiggTyM105 ай бұрын
@@experimenting8174 it can be loaded "shot gun"...when the eye is facing front and back.....but can't secure it as well that way, because of the limited amount of chains that can be applied. If it's laid on its side....the coil stands a better chance of being damaged.
@jm-gt1xz6 ай бұрын
The most important chains are the ones that pull straight down.Dont forget to wrap or tie your binders. Perhaps rubber under your coil bunks, metal to metal will slip. But it looks great. Good job.
@stuartgray58776 ай бұрын
Securing those coils at the bottom like that gives the coil the maximum mechanical advantage for snapping those chains.
@johnkowloon81876 ай бұрын
Your dunnage is unacceptable and your 2 chains short.. that coil weighs 42+ k
@Tom-kn6sr6 ай бұрын
Why don't they lay these down so they can't roll?
@johnkowloon81876 ай бұрын
You pull into a warehouse with several hundred of these coils.. they are loaded with an overhead crane that has a lifting device that looks like a big c shape the lower goes thru the coil eye which with the protective rings will not deform the coil. There are 2 ways to load the coils #1 is called suicide which the coil eye fa es the lateral edge of the trailer as shown in the video and #2 is shotgun which the coil eye faces the back of the cab..the Chai I g procedure for shotgun is to cross the chains through the eye front to back an 1:33 d back to front..these coils are no joke so 5/16 chain is never to be used only minimum tagged grade 70 3/8 chain and equal grade ratchet or boomer binders be used..I prefer boo.ers because they don't twist the chain..I've rarely seen anyone take proper care of ratchet binders or use precaution of twisting the chain..or even using g corner protection for that matter but that's another can to open..stop storing straps on the winches..bungee the winches in the center of the trailer to keep the road shit off them much as possible and off the front axle of the trailer..
@user-mr3jd4bf3m2 ай бұрын
They're spring-loaded when they're rolled up lame up like that keeps the load on the Spring pressure
@corywilson73546 ай бұрын
Nice fish but I need to see you lay some of them on a measuring board lol
@thomasreyes28576 ай бұрын
You obviously have no clue what your doing. You need to have change going for and aft more than just in the middle😂😂😂😂😂😂😂
@pinslayer45796 ай бұрын
Not a certified chain in the bunch boomers instead of ratchets hooks outside the rubrails.......
@David-yy7lb7 ай бұрын
an aluminum trailer with aluminum stake pockets not very strong compared to a steel trailer with steel stake pockets
@Lowcountryinshore8437 ай бұрын
All steel trailer is good but to heavy I prefer combo trailer
@kb3svj7 ай бұрын
I'm curious as to where this coil was picked up since you did not use beveled dunnage. I'm with the other driver, I would have used 5 coil racks (10 k per rack)...... it's cheap insurance. With 5 chains, the WLL is good for 47K A 6th chain can't hurt if available. Other than the two observations, you did a dandy job of securing that coil. Mr. DOT Man ain't gonna fault you, assuming the coil is 47k or less.
@Lowcountryinshore8437 ай бұрын
Thanks for the input bro
@spellignerror89983 ай бұрын
I came here to say each coil rack is rated at 10k (at least mine are, maybe OP has space-aged coil racks). Gonna need at least 4 for exactly 40k lbs. or 5 to be safe in case the shipper slipped an extra pound in there
@valeriewiggins91747 ай бұрын
Wow those fish are humongous
@valeriewiggins91747 ай бұрын
Big sheep head never caught those b4
@valeriewiggins91747 ай бұрын
Great catches
@robertgreathouse17677 ай бұрын
There's no such thing as a master coil, been hauling steel since 1986
@1PITIFULDUDE7 ай бұрын
You probably never heard of a pup coil either. Oh, brother 🙄
@sheild11176 ай бұрын
Did you really say there’s no such thing as a master coil?!!!.. LMFAO!😂
@BiggTyM106 ай бұрын
1 coil Over 40k lbs...is called a master coil bruh
@jimmynewell58157 ай бұрын
I enjoyed your video, where are you located
@Lowcountryinshore8437 ай бұрын
I’m glad you enjoyed thanks for watching and I’m located in Charleston sc
@saltwaterjacksfishing7 ай бұрын
Great video!! Great information.
@Lowcountryinshore8437 ай бұрын
Thanks a lot glad you enjoyed it
@SteveB-hy2ci7 ай бұрын
Dinner always taste better when you catch it clean and cook nice fish with jalapeño hush puppies just saying.
@Lowcountryinshore8437 ай бұрын
Man that sound delicious thanks for watching brother
@TAZ.MENARD7 ай бұрын
Great video. I’d like to see your casts. You edited the cast out.
@Lowcountryinshore8437 ай бұрын
Yes sir thanks for letting me know I will try to include more cast thanks so much for the positive input
@xofnax8787 ай бұрын
I’d use 5 racks and six chains with a strap
@Lowcountryinshore8437 ай бұрын
Wow nice job
@BiggTyM106 ай бұрын
Yep...law is 2 per 20k lbs
@honeyholehuntersfishing7 ай бұрын
Pulled some nice ones.. great job bro!👊👍💪
@Lowcountryinshore8437 ай бұрын
Hey man thanks for the compliment I’m headed to check out your channel
@guccigotfans89987 ай бұрын
Dat boy
@Lowcountryinshore8437 ай бұрын
Hey
@cynthiamays79447 ай бұрын
🎉congratulations nephew... 🐠
@Lowcountryinshore8437 ай бұрын
Thanks Auntie
@schuck93267 ай бұрын
Great job! Thanks for sharing these very nice and informative videos catching some very nice fish. Very relaxing.
@Lowcountryinshore8437 ай бұрын
Thanks for watching glad you enjoyed
@Lowcountryinshore8437 ай бұрын
Please comment your likes or dislikes on this video thanks for watching