I would like to purchase a sandblaster, I don't know anything about them, how much would it cost, please? I don't mean only the nozzle but the whole machine and grit etc.
@coandasandblasters21 күн бұрын
Hello, visit www.coandaair.com. The code to access the website is: Coanda1
@user-fo2ye3jl9iАй бұрын
Not fussy about the wood being rough 😂 job done that s all that matters 👏🤘👍💪 . How would you go about it unsatisfied people. Awesomeness love it ❤ that's just the prep he's doing. Getting it for next stage prep. From new Zealand 🌏🤘
@Secession1900Ай бұрын
I'm sorry to say this but the wood surface looks too rough after blasting. It should be smooth not textured the way it is. Based on my experience in grit blasting wood I would say you are using too coarse an abrasive and too much air pressure.
@Becens2 ай бұрын
Are you using walnut shells as the sandblasting medium?
@coandasandblastersАй бұрын
Hello, no in this video we use Quartz sand.
@BecensАй бұрын
@@coandasandblasters It is a good choice
@shabanbushi16502 ай бұрын
Where i can buy thus machine
@coandasandblastersАй бұрын
Hello, you can visit our website. www.coandaair.com
@coandasandblastersАй бұрын
The password is Coanda1
@bogcrismnz2 ай бұрын
Hello, I have left you a message on email. Could you please take a look? I am waiting for your response. Thank you.
For more information regarding the Coanda Sandblasters Email us at: [email protected]
@sazzadarefin2 ай бұрын
φοβερός
@MkTtdg-cd2ku2 ай бұрын
πόσα psi έχουν οριστεί
@MrBelascoaranShayne2 ай бұрын
Unless the strength of the propelled air can be controlled, that sandblasting could deteriorate the wood a lot. I wont dare to use it on wood. Is more often used on metal I think. To remove paint from cars for example.
what kind of specifications do you have on your air compressor specifically scfm and horsepower thanks
@Pure_Boxing3 ай бұрын
Looks like the grain damaged the eood
@coandasandblasters2 ай бұрын
Yeah that was the purpose, we didn't want it so we wanted to destroy it.
@JosephAlex-el8mt3 ай бұрын
Terrible Sound 😂
@mariyadaz3 ай бұрын
What equipment and media do you use please.
@coandasandblasters3 ай бұрын
We use our Coanda Sandblaster and a small air compressor. For blasting media in this video we used quartz sand. Let us know if you have any questions!
@PatrimonyPainting3 ай бұрын
Thanks for this video! Is it possible to sand blast wooden door that has multiple paint coats without raising the grain?
@coandasandblasters3 ай бұрын
Yes it is but bear in mind that the more paint coats the door has the harder it will be to remove it.
@PreparelikeJosephАй бұрын
Is it safe to sand blast poplar wood?
@RezaulTanim-ee8iz3 ай бұрын
It's pretty good
@coandasandblasters3 ай бұрын
Thank you Rezaul!
@naynay1973 ай бұрын
Idiots! How are you going to sandblast WOOD!!??….
@Becens3 ай бұрын
Becens is a professional abrasive and refractory materials supplier in China. Our mainly products are Aluminum Oxide (Corundum), Silicon Carbide, and Garnet, which are widely used in Abrasives, Blasting, Refractory, polishing, Water-jet Cutting, Finishing
@AleX-CooL3 ай бұрын
Είναι αρκετά καλό, φοβερή δουλειά
@wade12714 ай бұрын
'Promo sm' 😁
@coandasandblasters4 ай бұрын
Hello, what do you mean?
@user-ou3wn2ct5v5 ай бұрын
What media are you using
@coandasandblasters4 ай бұрын
We are using Quartz sand!
@user-ou3wn2ct5v5 ай бұрын
How much is this machine, are you using glass to blast and what size compressor is needed
@coandasandblasters4 ай бұрын
Hello, for details regarding prices and etc please email us at [email protected] . We are using Quartz sand and we recommend minimum a 50 Lt air compressor. Anything above a 50 Liters air compressor is more than enough to work perfectly with our Coanda Sandblasters. Let us know if you have any more questions!
@maiks88465 ай бұрын
how many psi are set and how much volume does the compressor produce
@coandasandblasters4 ай бұрын
The sandblasting process starts with the air compressor at 116 psi - 8 bar and slowly the pressure falls.
@LetsCatchYourDream5 ай бұрын
What machine is this?
@coandasandblasters4 ай бұрын
This is a Sandblaster! More specifically our Coanda Sandblaster 35 Lt Pro model. You can see this model in plenty of our videos on KZbin sandblasting various of surfaces.
How long did it take to blast all the paint off that door? Also do you sweep up the sand at the end of your project and reuse it or do you have to have new clean sand running through the sander
@coandasandblasters6 ай бұрын
We didn't sandblast the whole door so we can't answer with certainty about the time. Yes the sand we use is reusable.
@journeywithjay31976 ай бұрын
@@coandasandblasters if it falls on the ground and gets some other particles and stuff in it, I would assume it can't go through the nossle? Also do you have a website for pricing and info