The easiest way to remove that pin without damaging the frame is by bumping it out with a 3/32 pin punch using a palm nailer. Roll of tape is a good rest. Remove the take down lever and reattach the slide for extra support. Don't jackhammer it practice a couple times on a block of wood to get the hang of controlled single impacts. This makes removing that pin the simplest step in this process.

Great video

This was so well done I finished the job in almost exactly the time of the video. Suffice to say the tyrant trigger on my p365 did not go as smoothly

Just noticed this video doesn't show you how to take off the trigger bar and use the new trigger...and I also notice that it's the factory trigger.

Will this trigger kit work with a EAA Girsan Hi Power and does this also eliminate the magazine disconnect ?

Agh!! That shirt!!! Just kidding, great video sir.

I need help because I'm not hearing a trigger action sound when I test my Taurus g2c. I'm hearing nothing

I installed and the trigger wont reset. The grip safety also slightly engages when pressing the mad release. What did i miss?

I used a sharping stone to reinstall the new rear sight. I removed a little bit of sight material at a time. It was a very challenging job to say the least.

Brah I'm not buying another product from yall with you wearing that ridiculous ass shirt

Whats the weights of the main and rebound springs?

Will this improve the dh3 trigger?

It took me an hour because I was intimidated but everything has a function and a reason. It is a very straightforward design and so are your instructions!

I just performed this. Very helpful tutorial. Very well informed.

Apex video amazing. Have not shot it yet. I ordered it yesterday and got it today. Thank god for KZbin and 10 SECOND REWIND FEATURE THANKS APEX!!

Yeah my 22 lost my sight screws and the pin made it a b to clean

Wish y’all made this trigger for the Springfield Exhelon !!

Outstanding video with clear and well spoken instructions. The sequence of operations was spot on. I had purchased an Apex trigger and disconnect for the sub 4lb pull. When I got the gun back from the gunsmith it worked for 5 pulls in the store. When I got home, the gun would not fire or fired after a 1 second delay. Brought the gun back, they couldn't figure it out and installed the stock disconnect. The trigger was back to stock or worse. I was pissed. Fast foreward after some mid-par shooting I figured I could be a jr. gunsmith. Watched this vid a few times and had no issues taking the gun apart, identifying that the gunsmith had reversed one of the trigger bar springs 180 degrees so the spring was reversed. Fixed that, reassemble, THAT TRIGGER IS NOW AWESOME!

Is the installation the same for the Performance Center 10mm in 5.6"?

Marketing: "improved geometry" Reality: laser engraved our name on it *Talk to us about the real improvements, or decrease the pressure angle on the inside face to reduce wear when loading one the chamber manually, for $65 that what it should do.

Excellent instructional video.

Old vid but I’ve had 2 of the enhanced trigger on a M&p 9c and 40c. Just picked up a nickel plated 40c, put just the apex enhanced trigger on it and had a “dead” trigger. I didn’t get a feeler gauge. Just a flat head screw driver and opened it up a bit. Dry fired it and way better.

Any ETA on when the super clamp might be available on your website? Been waiting and looking for it to switch to “in stock” from “out of stock” … Hopefully it will soon since my STEINER MPS is on its way !!!

Do we install the Gen 3 like the Gen 4 or do you have a different video?

Is the plunger for the spring needed? I noticed when I use the plunger I sometimes don’t get a tactile reset but I took it out and I get a reset everytime

Was the grip safety spring issue ever addressed? I just bought one of these triggers but I’m not going to install it if it won’t fire unless I use the OEM spring or deactivate the grip safety mechanism

Excellent video. Every step was thoroughly explained. This made it extremely clear as to how this trigger and it’s associated components are installed. That said, sometimes I know I’ve had one too many concussions. In all honesty, I checked the position of that trigger bar before installing it 20 times. No exaggeration. Not only did I install the trigger bar wrong the first time, but I also installed it wrong the second time. If this happens to you, find the appropriate sized punch, use a phenolic block or something else that won’t mar your finish and very carefully punch that trigger pin back out just to the point of *almost* recessed. Be careful not to hit the actual trigger bar. I taped the trigger to a wooden block that had a hole drilled so that the pin could back out. It worked for me twice and I’m no mechanical genius. Just be extremely careful.

Is it the same instructions to the m&p2.0 polymer frame??

Having trouble putting takedown lever back in.

What an incredible video, I wouldn't have bought this trigger if I didnt see this video before hand to invoke confidence. Ive never done anything on guns in my life and this took me 40 minutes. No mistakes. triggers feels fantastic

Can this video be used for the Hellcat Pro and Pro Comp? It looks similar in build but just want to make sure.

LOL! "Why don't I recommend lubricating the rails inside the slide. Uh, just because". There's no difference between lubing the slide or frame. They join together.

I just pulled my firing pin out and I in fact do not have that little polymer sleeve in there. Apparently they didn't put it in in the factory? This is the first time I've taken it out. Will s&w send me one?

This video is kind of controversial because alot of people who do videos on lubrications recommend that you oil the inner parts of the slide. This is the first time that I've heard to only lube the frame but that's makes a lot of sense too. 🤔

When I saw PSA I thought Palmetto State 😂

Ordering one now, great video.

Sure hope there is a MRAT Comp coming soon for the 545 Tactical. Man, we can't get much aftermarket support for anything. 😢😢

Whats the difference for the install in a Gunsmith Barrel compared to the semi drop in barrel?

I have a Hellcat. I am going to get these extended controlls added on. They are not cheap. I figure, it may run up to 100.00 in parts & labor??? I hope not that much. I want a professional to do it. I am not mechanically inclined.

Two questions: One, does your kit work on a shield Plus 30 super carry? Two, what is the advantage to your kit? I mean, what improvement will I notice?

Nice! I didn't have any proper tools, but I made do and these were great instructions! Stoked to try it out at the range!

Good video thanks

Waiting for this to be back in stock!

Can I use this video as a basis for the polymer frame M&P 2.0 trigger kit you guys sell?

3:05 I had watched other vid of apex trigger installment without safety and to my surprise the spring popped out. Good thing I had my ears open because it hit a window then fell into my crotch. Didn’t know what it was and where’d it go. This vid helped

That white background is absolutely blinding my guy

Uh. Definitely deters regular disassembly for cleaning. Great for people who never shoot.

Is it possible to just replace the trigger without having to mess with the rear sights?

Do you have to use a vice? For the trigger shoe part? Like is it absolutely necessary?

What is the weight of the trigger pull?