I was wondering is it possible to mount shifters on backwards, or turn them .To make them push rather than pull, so i can use one on wheel to pull and one on base to push. Just wanted to know before I buy thanks would be much appreciated 😊
@Sertao20137 ай бұрын
If you don't use the zero stop piece is there a marking on the post so you know what rotation you are on ? Does the turret dial move up and down or does it just turn without moving up and down ?
@A603637 ай бұрын
It does not move up or down with rotations. Without it, you either need to count rotations from the end of travel, or maximize the cant in your rail to be less than 1 rotation from the top, which is what I do on my 22LR’s that see ELR type shots. I’m currently using a 40moa rail on that one.
@kelvinmasur Жыл бұрын
Its no longer available, are you willing to share the .stl file?
@kwkride Жыл бұрын
Thank you for putting up this video. It is really helpful!
@theusaftechguy Жыл бұрын
Great video, Thanks!
@kluper1157 Жыл бұрын
Thanks Big help just got one used
@Nikolas4g63 Жыл бұрын
hey, hope you see this. ive read in reddit you got a drawing readin for 4080 profile. If you are wiling to share it or sell it let me know. thanks
@renbarturbo Жыл бұрын
spot on thank you works perfect with my winch
@Mustang19931 Жыл бұрын
Will these come back in stock?
@masacre5835 Жыл бұрын
Hola! Esta emisora sirve para cualquier coche de radiocontrol y de cualquier escala? Porque yo tengo uno de escala 1/5 de gasolina y esta emisora me gusta mucho, pero nose si sirve o no y cuánto alcance tiene
@A60363 Жыл бұрын
Hi, it sounds like your asking if the radio system is good for a 1/5 scale gas vehicle. It should work on any radio controlled vehicle, of any scale. If using a nitro or gasoline powered vehicle, you will want to use a receiver with an external antenna for better signal and range.
@Sully330 Жыл бұрын
So I don’t have to use the zero stop run? Sorry for the stupid question.
@A60363 Жыл бұрын
You don’t have to use the RevStop. Without it, you’ll gain full elevation travel up and down, but won’t have a zero stop, so you’ll want to remember or write down how many turns up from the bottom your zero is.
@chrischand50822 жыл бұрын
Looks brilliant.
@michaelruebusch22752 жыл бұрын
Why can't Vortex just make a scope with a hard stop? All the shims and RevStop ideas are just not that great.
@themightyaswang172 жыл бұрын
Can you develop a magnetic shifter mod for the CLS Universal Hub?
@elliotbaltazar2 жыл бұрын
Good comparison. The large ISDT discharger can be adjusted to whatever voltage you like if you use the bluetooth app for it. That's also how you update the firmware. I would suggest giving it a try. I love mine.
@spyder000069 Жыл бұрын
The isdt is the most frustrating piece of equipment I own. 2 failed ones. All of them with BT connection issues (multiple adroid phones tried). I have a BS250 on the way to try. My PowerLab8 charger via PC is the best but was trying to have a simplier solution when I didn't need to get that in depth with the analysis.
@elliotbaltazar Жыл бұрын
@@spyder000069 Sorry to hear you've had trouble with your dischargers man. I've used both of mine about a dozen times each, and they haven't quit on me yet. The bluetooth has always been a little flaky on these though. And yes, the pl8 is probably the best piece of RC battery management kit that I have ever had. It sucks that they went out of business.
@allrc87372 жыл бұрын
Hi iam new in this hobby and I want to buy this transmitter but I don't see any video talking about the Gyro in the reciver or this transmitter and the reciver has not Gyro bcs I using a radiolink transmitter and the reciver has Gyro integrated please let me know thanks
@DG-mi2mc2 жыл бұрын
Thank you very much 🙏
@dennis85w2 жыл бұрын
Hi I have ordered the MK2 and hope that it arrives quickly in Germany. Looking forward to the part. Can I also slot nut Nut 8 - M6 with M6 threaded screw hexagon socket groove? Sry for my English Have a nice one
@A603632 жыл бұрын
Guten tag! No apology needed - I am sure your English is better than my German! You can use smaller fasteners, but you may want to use a washer against the mount to prevent deformation and disperse the load. As always, do not over torque - we just need to prevent the fasteners from loosening over time, not secure a wheel to a car. Thanks!
@chicagoal37312 жыл бұрын
Do the t nuts come with it?
@A603632 жыл бұрын
Hardware is not included.
@GeloOfficialPR2 жыл бұрын
Thanks for the vid, if i want to use a light switch , would i use the 2 possition ?
@A603632 жыл бұрын
That should work
@GeloOfficialPR2 жыл бұрын
@@A60363 awesome
@supunjagathpriya20312 жыл бұрын
Do you happen to have any magnetic shifter options for the Fanatec McLaren GT3 V2 wheel?
@A603632 жыл бұрын
I do not - thanks for asking.
@supunjagathpriya20312 жыл бұрын
Do you happen to have any magnetic shifter options for Fanatec McLaren GT3 V2 wheel?
@joshpeets39512 жыл бұрын
Very nice! Do you know if this magnetic shifter mod will fit a Fanatec Clubsport BMW GT2 rim? They look very similar on the back. I also just ordered this universal hub so I'll be looking to buy 1 or 2 of these soon. Thanks!
@A603632 жыл бұрын
Thanks! This version won't fit the BMW rim due to the plastic shroud over the back of the shifters - but my RSR version is close (it just doesn't have both magnets fully contacting each shifter, since the BMW shifters are asymmetric).
@joshpeets39512 жыл бұрын
@@A60363 Thanks for the reply! If you made the magnetic shifter mod for the BMW rim, I would definitely buy one. I can't find any of these made in the US. They're all from Europe.
@ianrowe50482 жыл бұрын
I have the exact same issue. Would definitely buy one if you made it for the bmw gt2 v1 rim.
@NBKarmwrestling2 жыл бұрын
Arken and Athlon will CRUSH Vortex in very short fashion if they already have not. I used to LOVE Vortex and still own two of their scopes. (2012 PST FFP 6-24, and 1-6 Strike Eagle) but their quality control has went to the wayside I am afraid. Don't get me wrong, they have a great warranty, but not if I have to use it all the time.... Great video explanation!
@TangoOne Жыл бұрын
Stop watching youtube shills that are ambassadors for Arken. If Arken is good at one thing, it's paying for youtube reviews.
@atv_hulk2 жыл бұрын
Hello. A very nice idea. Your plan is also very well worked out. Are the measurements in Inches?
@A603632 жыл бұрын
Yes, dimensions are in inches
@atv_hulk2 жыл бұрын
@@A60363 Thanks for the Info
@frozenphyro23022 жыл бұрын
Just used this video, it works amazingly!!
@davidaguiar13872 жыл бұрын
Nice feature but disappointing execution. I'd rather have washers to be honest.
@lyambesnard49892 жыл бұрын
Will it fit the csl dd
@A603632 жыл бұрын
This one will not, but I have a version that does. kzbin.info/www/bejne/n6vRZH-Loc-Bgac www.ebay.com/itm/234045293238
@FattyMattyG462 жыл бұрын
This is amazing!
@MajorMalich2 жыл бұрын
Just got these today. Awesome well done!! Love the feedback.
@JayJay-19852 жыл бұрын
Hello mate I have the nb4. Is there a way to set up neon lights for example. Like turn them on and off at the click on the screen. Thankyou
@A603632 жыл бұрын
For lights, I just use a cheap (~$10USD) Rx light switch from Amazon. Then you just need to set up a channel as a 2 way switch
@muazsuhelmi46952 жыл бұрын
Hi sir.. I already update my noble to latest version.. But when I plugged my servo winch to ch3.. It constantly spinning non stop.. Do you have any solution?
@A603632 жыл бұрын
Ch3 is an on/off switch only, it won't really work with a winch, as there is no way to stop in the middle, without losing the ability to pay out line (unless you have one of those free spinning winch spools, in which case, you can set an end point to 0).
@VelderVelder8 ай бұрын
I also have the same problem with my boomracing winch....but when I use another boomracing winch there is no problem whatsoever
@robinferdinando40382 жыл бұрын
Have you a new update of the design that fits the fanatec csw v2.5 and streamdeck mk2?
@A603632 жыл бұрын
I've got a Stream Deck mk2 version for the CSL Elite in testing now. Hopefully within a few weeks I'll have mk2 versions for the CSL Elite and DD wheelbases, but edit - I've got a prototype for the CSW 2.5 and Stream Deck mk2 created - I just need fit testing.
@robinferdinando40382 жыл бұрын
@@A60363 allright buddy, okey so guess will have to skip mounting it to the wheelbase. Would you create a custom stl for cash? I need for this weekend coming up :/
@A603632 жыл бұрын
@@robinferdinando4038 Shoot me an email at CromulentDesignsUS at geemail and we can discuss options!
@A603632 жыл бұрын
I've got a model created, reach out to me if you'd like to help test it.
@robinferdinando40382 жыл бұрын
@@A60363i will send you a mail shortly 🙏👍👌
@weststang15652 жыл бұрын
Dude!! You are my absolute Hero!! Thank you, thank you , thank you so much for this video. You don’t realize how frustrated I have been trying to setup my servo winch.
@A603632 жыл бұрын
Awesome, I'm glad I could help!
@Pozzer5282 жыл бұрын
THANK YOU !! Mine came with no instructions ! I was like " What the F is this ". I have 3 Vortex Scopes. ALL 3 have a different zero stop system !
@Jed_Cotterman2 жыл бұрын
Would you be able to cut one a little thicker (eliminate some play) for a simagic alpha mini?
@mikcampbell10983 жыл бұрын
Do you know your mount will work with the Version 2 Stream Deck? I'm in Australia so don't want to purchase without checking first as postage is more than the actual item
@A603633 жыл бұрын
Stream Deck's literature doesn't help us much on the sizes. My original version measures 118.0 x 84.4 x 3.0 mm. As long as the new one matches those dimensions, it'll fit.
@mikcampbell10983 жыл бұрын
@@A60363 I've measured with my veneers, the new one is 117.56 x 83.85 x 4.8 mm. Deepending on the overhang if you can make the depth bigger it might work. If you want I am happy to work on an updated design just let me know what else is required
@A603633 жыл бұрын
@@mikcampbell1098 Thanks! I just replied to your message on Etsy. We can definitely work something out.
@wimstradamus003 жыл бұрын
Hi Cromulent, is there a .stl that you can share?
@A603633 жыл бұрын
Unfortunately due to a few people selling my designs, I do not publish the stl's anymore.
@habibulbasher383 жыл бұрын
Any scope would be good for my Diana 56TH air gun
@TheNitpicker3 жыл бұрын
Looks great but it bends a bit to much on the other end for my taste, I'd prefer it thicker and less bendy
@Kevinlinaresroller3 жыл бұрын
How are these compared to the ones fanatec sells on their website?
@A603633 жыл бұрын
I have the Fanatec ones, and they are great, but at 1/4 of the price, these offer ~75% of the improvement. They are a great value for folks that don't want to drop 1/3rd of the price of their wheel on shifters.
@farvatron3 жыл бұрын
Good work my man! I tinker and have a printer but I'm not even going to try topping that! I want one! Maybe 2! If you'll use DHL or Fedex or UPS I'll order now and pay for shipping!
@punkish73 жыл бұрын
Received and installed mine yesterday. Very nice, and big improvement over the other I had. These allow you to adjust your paddles and the magnets will still make contact. With the others I had, if you wanted to adjust your paddles for a short throw, the magnets would separate. This is a far better design. Highly recommend if you are looking for the mod.
@punkish73 жыл бұрын
Thank you!
@punkish73 жыл бұрын
I have a different magnet mod which is a big improvement over stock, but it is too stiff for me. Can you make one with a weaker magnet, or supply multiple magnets? I like the feel, but need something with less resistance. Thanks!
@A603633 жыл бұрын
I'm not sure how strong the magnets are on the mod you have, but these are a good blend between feedback and light action. I've never had anyone complain they were too strong or too light.
@punkish73 жыл бұрын
@@A60363 thanks for the prompt reply. Ordered a set. And adjusted paddles thanks to your post regarding that!
@ezhiksobolevskii4323 жыл бұрын
👍
@svpracer983 жыл бұрын
Is there a cad file avaliable for this?
@kurtovich1003 жыл бұрын
So you can only set pre travel? Nothing to do about over travel.
@A603633 жыл бұрын
Correct, unless you wanted to drill and tap for another setscrew.
@Sithhy3 жыл бұрын
That is a pretty neat idea. Now, if only the Streamdeck wouldn't be so expensive...
@hoglaw093 жыл бұрын
This scope has a big (56mm) optical bell. What rings are you using for this scope?
@A603633 жыл бұрын
I've got them on 3 guns, all with .92" & 1.00" rings, all with relatively heavy 22LR barrels. One might need to go a bit higher for a heavy PRS center-fire setup.