so is kaia is a characteristic of African Mahogany right? That's been my experience, as Honduran has a grain construct more similar to walnut. I ask this to verify what you intend because i didn't hear a reference to which one contains the kaia effect.
@bialy100k26 күн бұрын
0.27g/cm³ in metric.
@mounanpapaАй бұрын
Beautiful ❤
@ranbirgill4718Ай бұрын
I thought genuine mahogany had a purplish colour that when older turns brown but what do I know
@calebfast80882 ай бұрын
Awesome video, subscribed.
@austynsanft-eugenio54432 ай бұрын
I'm not here to watch the video because I'm not trying to give you watch time but I just wanted to say good, We don't need more white people Harvesting our amazing tree to make watches, furniture, decks etc. we need more of them on our islands playing their part in nature.
@kcsvantasticvoyages97293 ай бұрын
Some light electrics ring out or resonate better, plus I am getting older, too. But, in general that makes the instrument sound better and can be easier to play as well. Just my thoughts from experience.
@gradyparker59213 ай бұрын
I’ve always wanted to make a bowl of cup but I couldn’t because I couldn’t get the faceplate off and thanks to you I got it off, thank you
@juandelacruz52474 ай бұрын
Widely used for bed frames, table and chairs in the Philippines. Very good wood in my opinion and cost-effective!
@CommercialForest4 ай бұрын
@@juandelacruz5247 great to know. So many applications for paulownia!
@raymondstebbins59044 ай бұрын
I feel your pain I live in Hawaii I'm a finish carpenter I do so much repair on koa and some of the boards im using are well over a $1000 im getting at cheeper prices then you but the waste unbelievable as for stringed instruments koa far from the best tone wood
@randallmccorquodale32904 ай бұрын
Nothing better than a good Planer video!
@scottjackman66825 ай бұрын
Thank you for the video. I recently acquired a phenomenal amount of mahogany wood. I m3an a shot ton. Very wide and thick. Some as much as 2.5 inches thick and up to 12' long and 12" wide. It had been sitting in a warehouse for the past 40+ years. It's all rough sawn. I have a couple planers,jointer etc. I need to plane some of it I guess to determine what type but I am leaning towards genuine mahogany based on what I have learned. Anyway thanks for the info
@MormonMustang_6 ай бұрын
My grandfather got caught up in the paulawnia craze in the 90s. It's a cool hobby wood but nothing to waste time harvesting. It takes a lot of care for it to grow as advertised. It's basically a hardwood weed.
@DavidPaulNewtonScott6 ай бұрын
Better woods of other trees grown by diasugi.
@thefreese16 ай бұрын
I just finished a D-18 out of African Mahogany... the grain is almost tigered , and it pops out at you .. Its light .. but best of all... Its the best sounding guitar I own . In fact It rivals a top deluxe Martin with expensive wood costing thousands of dollars.. In both looks and sound . It's a great sounding wood ... with a lot of tone ....
@ScheltemaBoutiqueGuitars7 ай бұрын
I ordered a couple blanks from you guys and got it last week. The blanks look amazing and had a couple others on the go. I expect a 3lb blank. Love that I found a replacement to Swampash.😁
@CommercialForest7 ай бұрын
Great to hear. It takes such a beautiful finish and the final weights are usually incredibly light. Happy building! Thanks
@josephsnipes51687 ай бұрын
I couldn’t tell in the video, does the African mahogany have the consistent pencil marks or is it the genuine mahogany?
@CommercialForest7 ай бұрын
I typically associate the pencil lines with African more than Genuine. However, it's not a hard & fast rule. More of a clue.
@JonDeth7 ай бұрын
The weight and density should make it extremely easy when it comes to musical instruments, but you broke it down perfectly with your expertise. *When it comes to guitars, if a guitar is sold as mahogany but you pick it up and it's lightweight, you know you have an African variety especially based on where that guitar was made.* Every mahogany guitar I own is dense and extremely heavy compared to other very popular woods, *but sometimes you get a mahogany guitar that is as light as basswood!* Typically, a guitarist used to mahogany that picks up a lightweight mahogany guitar will not be happy about it.
@CommercialForest7 ай бұрын
Thanks. I don't think we've ever had mahjogany as light as basswood but it definitely has a wide range of density.
@JonDeth7 ай бұрын
@@CommercialForest yes I was exaggerating but there's still a sense of ridiculous lightness to some. I just got a 24-fret mahogany neck and body Alexi Laiho style V. It's so light it sort of feels like the wood fibers are aerated like basswood. The more I look at what graining is visible, pick it up and hold it in various positions the more I can feel it's certainly a Mahogany but an exotic breed like Khaya and the pieces in my guitar are somewhat light and it has a borderline hollow feel to both the body and neck. *I have to strip the paint and clearcoat off the neck today though so once I get to the bare wood, I'll be 100% certain about many things, not just the wood breed used!* Oddly, I have had some pear wood instruments, and this thing has greatly felt like one of those super strong fruit woods. The pearwood necks tend to feel hollow but there's almost no poring as I'm sure you know, and fruit trees produce some of the toughest lumber.
@CommercialForest7 ай бұрын
@@JonDeth We brought in some figured pearwood slabs a few years ago, One was 20" wide x 18 feet long. It was insanely dense. Needed a forklift to flip it over.
@JonDeth7 ай бұрын
@@CommercialForest it seems like it would be an interesting experience and the instrument 1 of a kind top of the line, but I am in the Midwest and ordering specialty lumber is beyond my budget distance lol. Fortunately, I can get furniture grade poplar for under $20 to build most any size and shape body, so it'll have to do for now. Eventually, I will have my CNC mill doing most of the work, so the day may come I can get something exotic going on.
@gerardvriend7297 ай бұрын
My question is: why did these plantations fail? Failing is not an option, but I see in Europe that they failed as well!
@CommercialForest7 ай бұрын
If I had to guess,, I'd point to a general lack of experience (at least with Paulownia) among the teams involved. Even under the best conditions, a harvest can go sideways.
@gerardvriend7297 ай бұрын
@@CommercialForest that’s what I see around me! They try to grow them in Holland, but it’s to wet and to cold. Even 3 years old trees die! And not enough temperature to grow in the first year! You need a firm and tall trunk. For fineer wood.
@willdenham7 ай бұрын
I selected ultra-light mahogany for my LP build I'm ordering. I'm doing all the hardware myself. They have Honduran, but I am concerned about weight. I already own 2 LP's that are boat anchors. One is a Japanese built African m, and the other a 78' Gibson that lives up to 70's Gibson weight issues. Regardless I played for years onstage with it and became used to it. I want this new 59' spec build to reflect the weight of the original Gibsons, which were light. And just wanted to know what a lighter LP felt like. Honestly I can't tell the difference in sound of my Honduran vs. African mahogany guitars, other than their dramatically different pickups. Different fretboards too, one ebony and the other rosewood.
@holyperceval63108 ай бұрын
fgs i miss the metric system :'(
@CommercialForest7 ай бұрын
I've definitely grown to appreciate uniformity of the metric system.
@DavidPaulNewtonScott8 ай бұрын
Light woods are dimensionally stable but not hard wearing. I would use it as a ceiling cladding.
@CommercialForest7 ай бұрын
Paulownia ceiling panels or a large mantel slabs make for a less-than-grueling install!
@nicholasgeorge78259 ай бұрын
That's sweetgum not eucalyptus. How do you get it in CA?
@CommercialForest7 ай бұрын
We've been bringing it in for a while. It's a beautiful wood.
@leeasbury72739 ай бұрын
Andy, let us know when you develop the Custom "CandleCaster"! 🕯🎸🤘🤘
@1pcfred9 ай бұрын
Wood is a natural product so you have to expect variations with it. That's the beauty of wood, it's all different. You want something all the same go buy plastic. They'll sell you that too.
@CommercialForest9 ай бұрын
+1 most woodworkers agree, generally speaking…but, that goes right out the window, when it comes to their own purchases!
@1pcfred9 ай бұрын
@@CommercialForest you're lucky we can even still get wood today. The old timers logged just about everything worth anything. They had to live too. They also wanted the best they could get for themselves. Being there first they took it. We're left today with their scraps.
@alangerhard711811 ай бұрын
Sometimes you just gotta use your words.
@nbarca11 ай бұрын
The two pieces you shown in the video brought two things to mind. First, that koa most often grows with lots of crooked branches and bends, which might account partly for those angles ... especially if someone is trying to salvage every inch. Straight trunks are out there and not all too uncommon but winding branches are more the norm for growth. Second, it's not too often that healthy live koa are logged and so it is often old koa which have fallen down which get salvaged. Hence, they may often have some rot associated with them.
@TVoltG11 ай бұрын
I fill cracks and try to make them look like mineral or worm streaks.
@CommercialForest7 ай бұрын
great idea. Korina fills pretty easil;y, imo.
@SurfTheStreets0111 ай бұрын
Can this take stain? Just curious
@jmichaelhenderson118311 ай бұрын
I have three acres of these trees I would like sale
@CAgram123 Жыл бұрын
You left out a lot about the qualities of paulownia wood. You mentioned lightness and softness, but there are others. The wood resists moisture, can make veneers with it, resists insects including termites and is flame resistent. The leaves capture carbon from the atmosphere more than any other tree in the world reducing a farmers carbon footprint. The leaves also absorb great amounts of nitrogen and when the leaves fall and mix with the soil a huge amount of natural nitrogen fertilizer is added to it. Makes a world famous compost for gardeners.
@CommercialForest Жыл бұрын
You speak the truth. I'm guessing you've used paulownia before???
@CAgram123 Жыл бұрын
I intend to grow paulownia on several acres commercially, as soon as I can get a water well drilled. The tree is ready to harvest in 5 years and grows back from the stump and can be harvested 7 times in its life.@@CommercialForest
@firozshah59285 ай бұрын
@@CAgram123 8 years commercially you should keep '
@grassabrutta Жыл бұрын
That is a really good video. I was thinking of growing about a hectare of paulownia and then either slabbing or quartering the logs. Would a guitar maker prefer (and pay more for) bookmatched quartered paulownia ?
@CommercialForest Жыл бұрын
Generally speaking, yes. However, if the logs are pithy, small or knotty, quartering them won’t help their marketability
@vernfisher7911 Жыл бұрын
where can I GET PLANS OR INSTHUTIONS FOR SOME OF SAMLL PROJECTS
@there_is_nothing_here Жыл бұрын
I just recently learned Gibson makes their guitars out of both mahogany and African mahogany.
@Sachrial1 Жыл бұрын
You don't hate koa. You hate its price and attitude of suppliers. But not koa itself. So... Your title is clickbait. Isn't it? ;)
@CommercialForest Жыл бұрын
You speak the truth!
@jeff1872t Жыл бұрын
Yo, can you get me lumber for guitar bodies?
@CommercialForest Жыл бұрын
Probably ..what are you looking for? Thanks
@jeff1872t Жыл бұрын
@@CommercialForest I'm thinking Ash. Can you get material at 2" thick? Alder would also work.
@CommercialForest Жыл бұрын
@@jeff1872t yes, we stock both. DM me on Instagram instagram.com/commercialforest and let me know the how much lumber you need & what to zip code. We’ll send a listing with delovered pricing. Thanks! Steve
@leegmoore111 Жыл бұрын
great info but a fade to black every cut is super distracting and unsettling
@CommercialForest Жыл бұрын
Then you definitely won’t like the “star wipe” edit. Sadly, I don’t exactly nail it in 1 take 😬
@mehrantajdar9728 Жыл бұрын
Thanks thanks you saved me
@CommercialForest9 ай бұрын
My pleasure. Happy turning!
@mehrantajdar9728 Жыл бұрын
Thanks thanks you saved me
@MirHass Жыл бұрын
I’m happy I stumbled over this video.. To the point.. Thanks, man..
@sanyoshovah2887 Жыл бұрын
Is this wood too soft for making cabinet face frames?
@heidiondich632 Жыл бұрын
Look at that quilting! 🔥
@maineterrain2154 Жыл бұрын
Should we be doing this??? 😆
@CommercialForest Жыл бұрын
Yes…yes we should
@grantstewart5453 Жыл бұрын
How well does black limba work for necks? Is it stable?
@CommercialForest Жыл бұрын
HI Grant - A lot of builders use it for neck, as well as body wood. I'd say it's similar to mahogany in terms of stability/density
@JustusVidyo Жыл бұрын
wow
@doctorzlo6564 Жыл бұрын
What temperature's you used and for how long time? When roast tree?
@harp_stutts Жыл бұрын
I've heard the pencil marks called "rays" thanks for the info!
@johncampbell9120 Жыл бұрын
Reverse roll quartersawing eliminates all your complaints.
@koamott1787 Жыл бұрын
Hey why do you hate me ????
@prasadareddy1723 Жыл бұрын
Will it grow in southern India
@CommercialForest Жыл бұрын
That’s a good question. I am not sure. There are areas within North America where it does not grow well. In general, Paulownia grows best in warm areas with moderate humidity.