Herzlich willkommen, ich freue mich, dass es hilfreich war!

It's been off for about a year, I have done several trap shoots at my rod n Gun Club and a couple turkey shoots, haven't had one issue with it gone. Probably have fired 150 rounds or more with it off.

Sorry, I never thought to show that, as I usually only run a full choke. It almost never gets changed... It uses chokes designed with the same pattern and style as RemChokes by Remington. In the box with the supplied chokes is a cheap little flat stamped tool for unscrewing the choke tube. I personally am not a fan of it. I went on Amazon and purchased a RemChoke tool that inserts into the choke tube more securely and feels like hardened toolz steel. It is a round tool just smaller than the choke tube Dia. So once it is engaged with the choke tube, it is less likely to disengage under pressure. I will try to make a video with both the stock tool and the one I purchased....

I have a BTS12 as well and mine came with 2 chokes (FULL and 1/4). I would not recommend this shotgun for a left handed shooter.

Not so much nervous, but rusty... hadn't done a video in quite a few months. And my work schedule has prevented me from doing any since.... Hard to find a good rhythm like that.

Most Bullpups wont spit out anything below 1300 FPS . So try some high velocity and see how it goes.

Feel free to make your own video...... I am sure you can do it better.

Sorry, it's molded in, your stuck with it. But its really not bad, just no other option on this one.

@@MrHub929 Okay good to know - thank you for the info.

Is not pic railed. It is only the finest Turkish fake key mod look alike texture. I hate that part of the gun, but it is very comfortable to hold. More than you would think. All things considered. It is a very capable and remarkable ( even if questionable in styling) semi auto shotgun.

Glad the video was helpful for you! Thanks for watching!

You are a live saver! Thanks City boy

Does it work got one today

@@deangrifin7551 hell yes it works. But I locked the bolt open for a month. When I took it out to break it in it fired everything I had but 1round. That was my fault.

Early on yes. The gun needed a bout 3-4 hundred rounds to brake in. Esp. With cheap bird shot. The first mag probably had 4-5 FTF out of 10. After 300 rounds it was less then 1 per 10. Now hardly ever have an issue. At my last club trap shoot I had 2 rounds back to back where I was 20+ out of 30 clays. And I don't shoot trap a lot...

I had an issue with the gas ring jumping out of place and causing a FTF. Once I took it apart and put the ring back in its place, it worked perfectly

первичные рычаги SLX с красной точкой Hope my translation worked out. Had to ask my 2 teens for help translating the original message and they also translated my reply. Again it is a Primary Arms SLX red dot. It sits on a UTG riser, can't remember the height but it was originally on a flat top AR15.

@@MrHub929 Primary Arms SLX Micro Prism 1X ACSS Cyclops Opti Такого плана ?? Спасибо за ответ . UA UA UA 🤝🤝🤝

@Артем Shot - Mine is just the red dot , not the micro prism that has the acss reticle. The reticle is great, but very specific to caliber. It is just the SLX micro red dot on the shot gun. I do use acss reticle on two of my other rifles, and they work very well. Just usless on the shot gun.

I think several people would be quite interested in seeing that....

Your welcome!

First, let me say you sound condescending.... Second I'm waiting on your video cleaning your escort. Third, if you do you will gain another subscriber. If not, don't condescend.

@@joshuanorthern1863 I apologize if my comment came off that way...that certaintly wasnt my intention. As I said, I do appreciate your vid. I was just adding the method I use for cleaning this bullpup. Take care...✌

BrewCityRider - I didn't see the comment as condescending. I am used to many types of people and some are just blunt and to the point. No frills, if you will. That was all I read from it. I can appreciate that no two people are the same. What a boring world this would be if we were. Thanks for watching and taking the time to post a message!

Peace, love and respect to all. No disrespect intended to anyone.

​@@joshuanorthern1863they say the way you read a comment tells alot about you. If u read it as negative when it isnt its your problem

MKA 1919 mags of any round count.

Excellent presentation, you may well be a representative for teaching at any company, well done!

Here you go, see if this helps... HatsanUSA, Inc. P.O. Box 576 Bentonville, AR 72712 Phone: 1.877.278.4448

@@MrHub929 Thank you.

No, it is polymer with a stamped sheet metal outer cover on the sides.. it is to robust though.

Its in the works! I have already had a similar request made. So keep watching! Thanks!!