Hola, claro que sí. Siempre puedes quitar la carcasa de plástico en el maletero para ver cómo se ve. Mi suposición es que solo se necesita reemplazar la cámara, ya que puede soltarse fácilmente debido a las vibraciones, ya sea OEM o no. En el video no se muestra, pero tendrás que aplicar fuerza para desprender la pieza de plástico de los clips que la sujetan bastante fuerte. Pero si has quitado los tornillos como se indica en el video, no deberías preocuparte.

@ pero teniendo instalada la OEM habría que codificar de nuevo? O solo reemplazarla y ya funcionaria?

Dudo que kameran esté codificada. Si hay conexiones cerca de la cámara para el video, probablemente solo sea cuestión de cambiar la cámara.

Sorry, don’t know,never owned one

Maybe not close to Japanese but similar to American quality standards. Thank you for the facts even though I don’t get what the Taiwanese manufacturing has to do with cleaning a carburettor. 😂

Hej, kul att du gillar videon. Var väldigt länge sedan jag gjorde detta men stoppa videon och gör Screnshots så ser du var den svarta tunna kabeln går.

Den svarta tunna kabeln går som du ser då till karossen snett upp till vänster i luckan. Den tunna röda kabeln går direkt integrerad i den gula AV kabeln hela vägen fram till CarPlay enheten bakom handskfacket. Vill minnas att strömmen går därifrån i samband med att man lägger i backen.

@@mr_fix tack för svar. Min kabelsats ser nog lite annorlunda ut än din. Kameran och de två (svart och gul) kontakterna ser identiska ut. Kabeln dock, har i ena änden en gul kontakt (som jag antar ska in i CP-boxens rear camera kontakt) och bredvid den kontakten finns en gul 10cm lång kabel. I andra änden finns en svar kontakt och en röd kontakt (som jag antar ska kopplas till kamerans svarta och röda kontakt. Och samt en 50cm lång svart/röd delbar kabel (säkert jord och pos). Därmed kan jag inte göra samma anslutning som du. Tror jag blir tvungen att tjuva från backljuskabeln med den röda, och den svarta fäster jag i jordpunkt, likt dig. Några ideer? Hoppas du förstod min långa förklaring 😬

Stämmer nog som du säger. Du får nog koppla till någon av bromsljusen. På min gula kabel har jag en liten röd kabel integrerad som du ser att jag kopplat till den svarta tunna kabeln som leder till den svarta splitkontakten mot kameran. (svart kontakt (som kopplas till röd på kameran) har en röd och svart där den svarta går till jord och den röda går till röd som är integrerade i den gula videokabeln). Min kamera har kortfattat en röd och en gul kontakt. Din verkar ha en svart och en gul kontakt.

Thank you for the positive feedback. It’s always awesome to know you were able to help someone. Hopefully the video wasn’t too detailed (long).

If the microphone sound on your JVC KW-M560BT is poor, here are some steps to troubleshoot and improve it: 1. Check Microphone Placement • Positioning: Ensure the microphone is positioned correctly. Place it near your mouth (e.g., on the sun visor or dashboard), away from noise sources like windows or fans. • Direction: The microphone should face toward you for optimal sound pickup. 2. Inspect the Microphone • Clean the Mic: Dust or dirt in the microphone can affect sound quality. Gently clean it with a soft brush or compressed air. • Damage: Check the microphone and cable for any visible damage or loose connections. If damaged, you may need a replacement. 3. Adjust Settings • Microphone Gain: Go into the JVC head unit’s settings to adjust the microphone gain or sensitivity. Increasing the gain can improve pickup but may also amplify background noise. • Noise Cancellation: Some head units have noise reduction settings. Enable or adjust this feature to filter out background noise. 4. Check Wiring and Connections • Connection Port: Ensure the microphone is securely plugged into the correct port on the back of the unit. • Wiring Issues: Check for pinched or damaged wires that might affect signal quality. 5. Firmware Update • Update Software: Outdated firmware can cause performance issues. Check JVC’s website for firmware updates specific to the KW-M560BT and follow the update instructions. 6. Test Another Microphone • If you have access to another compatible microphone, test it with the unit to determine if the issue lies with the mic or the head unit itself. 7. Environmental Noise • Reduce Background Noise: Close windows and minimize external sounds during calls. Loud environments can make any microphone sound poor.

@mr_fix thanks i will check those steps but the micrrophone is put on the left pillar side trim but the issue is when i'm on a call everything is ok the connection is via Bluetooth but suddenly the connection of the call on the radio is lost i'm between 10 to 15 seconds but the call is still on the phone , then reconect to the radio, then appears interference and can't hear the other person and i have no renedy than hang up the call and redial again and same thing happen with the Bluetooth music audio 😒

Tack för tipset, kommer göra det nästa gång vore det förbannat lång tid att få bort det jag fick bort 😂

Glad to help, don’t forget to like and subscribe 😊

Have you tried to connect it to the router via the WPS button? Press it on the printer and the Wi-Fi router if you have one . The button should be flashing and they should find each other automatically.

@@mr_fix I've managed to connect it via ethernet atm, but wifi still gives me "disconnected" even though it's the same network, the router is 5 feet away. Since the scanner is also having a problem (black stripe) I think it's time to look for a replacement color laser that won't kill my bank balance, and isn't monstrously huge.

Du kommer inte bli missnöjd :-)

Read earlier comments in the thread. Try restarting by unplugging the power. Also remove and put back cartridges, et cetera inside the machine.

Sorry, no.

Back up the battery? 😊

Cool thanks

Thanx!

Check with unique-ad.co.uk/shop/

Good job, Ninja san 😂

Agree! 👊🏻😎

No its an Audi A6

I wish I could, winter has come to Sweden so the bike will be hibernating for a couple of months now unfortunately 😭

@mr_fix 🥲

Thank you don’t forget to like and subscribe

Yes, anything is possible but it might be quite a complicated process compared to an aftermarket solution. Here’s how you can go about it: 1. Choose the Right Camera Kit You’ll need an Audi OEM backup camera kit that is compatible with the A6 C7 model. The kit usually includes the camera, wiring harness, and module that integrates with the car’s existing MMI (Multi Media Interface) system. Make sure the camera kit is compatible with your specific MMI version (MMI 3G Basic, MMI 3G High, or MMI 3G+). 2. Installation Process Mounting the Camera: The camera is usually installed in the trunk handle. You will need to replace the existing trunk handle with the new one that includes the camera. Wiring the Camera: The wiring harness needs to be routed from the camera in the trunk to the front of the car where the MMI unit is located. This can involve removing some interior panels to hide the wires properly. Connecting to the MMI Unit: The camera connects to the MMI control unit, which may involve installing an additional video interface if your current system does not have one. 3. Coding the MMI System After the hardware is installed, the MMI system must be coded to recognize the backup camera. This usually requires using diagnostic software like VCDS (VAG-COM) or ODIS to enable the camera functionality in the MMI settings. Coding may also involve setting up guidelines and other camera features. 4. Professional Installation vs. DIY While it is possible to do this as a DIY project if you have the necessary skills and tools, I would recommend having a professional handle the installation to ensure it’s done correctly. Professional installation ensures proper integration with the MMI system and avoids potential issues related to wiring or coding. Consider Aftermarket Options If an OEM installation seems too complicated or costly, there are high-quality aftermarket kits (like mine that I ordered from a company called “Unique auto developments”) designed specifically for the Audi A6 C7 that integrate with the factory MMI system. Anyhow, Installing any backup camera can significantly improve the car’s functionality and driving safety.

It can be installed without any remapping. I haven’t done any remapping on mine in order to keep my warranty as the bike is brand-new. The sound coming out of this thing is awesome.

​@@mr_fixit has a cat too so no need... imagine how loud without one.

No need to tune the bike after install. This was very important for me as I didn’t want to void the warranty.

No need for a tune if you keep the baffle in, but directions recommend tune if you run with it out.

if you choose to go without baffle I suggest you get really good earplugs :-).

Vet ärligt inte men jag kan lova att det här röret hörs. När man åker i tunnlar så låter det som en Spitfire som attackdyker 😂

När man drar på så låter det rejält. Kör på ganska höga växlar för att få ner ljudet. Har faktiskt beställt en Quietcore baffle till den då jag inte alltid är den som vill ha “all eyes on me” när jag kör i stan. Quietcore lär garanterat behövas till besiktningen i framtiden.

😂 så ska d låta juh Jag kör själv en svart xsr900 och överväger nu efter din video beställa Kelpi (black cheroke). Bor du i Sthlm? Skulle gärna vilja höra den live, om d går bra för dig?

Ja men vinterförvarar hojen från imorgon.

@@mr_fix jag förstår 👌 tänkte jag kör på en sån då den även är snyggare än Dominator. Tack för videon! Vi ses på vägarna 2025

The retrofit CarPlay unit.. kzbin.info/www/bejne/qpi8l2d9bZlsgbMsi=J7w2DppxNVg2g3oT

@@mr_fix Actually All I need is to upgrade the mic alone Is that possible? 2007 Lexus RX350

it should work, the microphone has a 3.5mm male connector that plugs into the iD-Core unit

Always happy to help :-)

If you install it yourself they do as you basically bypass the stereo

Thank you so much for the feedback. Always nice to help. Don’t forget to like and subscribe thank you! 🙏🏻

@@mr_fix hi, thanks for your video, I'm thinking of making a second bathroom at home and I wanted to know if I need to use specific toilet paper or if I need to use specific detergent every so many months, is the product valid? I have to go up 2.4 meters vertically with a 32 pipe and 1.6 meters horizontally with a 40 pipe. thank you very much

@@bomber90ish don’t worry it will work with any type of one or two layer toilet paper

Just make sure no one in or outside the family flashes down kitchen paper, paper napkins or tampons and you’ll be fine. Otherwise you’ll have a video to follow :-)

@@mr_fix thank you for your answer, I would like to ask you another thing, I will not connect the sink to the sanicompact because it will be attached on its own. I had in mind to put an external mixer with shower head down near the toilet to be able to make a bidet inside the toilet. I wanted to know if by raising the water level inside the shredder the pump is activated automatically, thanks

Sorry, I’m not sure if there is one I don’t think so. Did you try with a shop vac?

Good job!

Thanks 1 million :-) please tell all your friends to subscribe, aiming for thousand subscribers 🙏🏻

När jag väl listat ut vilken kniv jag skulle använda för att få bort silikonen så skulle jag säga 30-40 minuter