The pmm magwell,,, was it shipped to you by usps,, FedEx or ups? Also do they ship to po boxes?
@catlinjack276418 сағат бұрын
It always amazes me how cheap guns are in the US
@duroboat69Күн бұрын
Whitch one is lighter weight Epl or Lh in the 4 16x44
@heric.4428Күн бұрын
Arken us like having a brick on a rifle morecthan 1 kilo,way too much
@XLOGIC-LLC2 күн бұрын
Great video, make sure you adjust the diopter ring where it looks true 1x
@OfficialSkankHunt422 күн бұрын
I came to look for a review on the 507c this isn’t the standard 507c. But still a good review
@EZ_Case2 күн бұрын
PSA 77gr OTM is my go to round.
@sog12722 күн бұрын
Does this plate make it cowitness?
@ADudeAndSomeGuns2 күн бұрын
@@sog1272 it does with the suppressor height sights that came on the gun. Can’t speak for other sights.
@2agunguy52 күн бұрын
Great review, what mount are you using?
@ADudeAndSomeGuns2 күн бұрын
Badger ordnance condition one.
@tylerramsey13882 күн бұрын
Is there less slop than on the magpul version? And is it easier to opperate dropping bolt than the magpul? Any input is appreciated from actual users key words there actual users..
@nicholaszizzo37293 күн бұрын
No buneo. IN MI OPINION stack rhem properly about nonmore than a 1/4 inch apart in height and nothing more movement than a qucik look up..
@ADudeAndSomeGuns2 күн бұрын
@@nicholaszizzo3729 WRONG
@EverythingFilmmaking3 күн бұрын
Get you a good mic brother…also curious why unblocked out what was on your hat👀
@ADudeAndSomeGuns3 күн бұрын
@@EverythingFilmmaking I’m running a cheap lapel mic any good recommendations?
@ChappySinclair4 күн бұрын
I wonder if these are as durable as a t2.
@XLOGIC-LLC2 күн бұрын
more because it’s etched
@ChappySinclair2 күн бұрын
@XLOGIC-LLC I understand the benefits of the etched reticle, just curious if the internals are as durable.
@XLOGIC-LLC2 күн бұрын
@@ChappySinclair If the T2 is a 10 I would say this is an 8 in regards to the electronic, but having the etched reticle backing it is pretty cool
@ChappySinclair2 күн бұрын
@XLOGIC-LLC I appreciate the input. I've used the t2 and comp m2 for over 20yrs now. Just started getting astigmatism issues. Looking at the 1x or 2x glx as a replacement.
@XLOGIC-LLC2 күн бұрын
@@ChappySinclair The 1x is fast up close but limited past 300 the 2x is a little slower but will get you hits on ipsc size targets out to 500 if you zero per instruction and do your part. For CQB the ACSS Cyclops is fast! For do it all the ACSS CQB-5 is nice so depending on what you’re after.
@t.m93414 күн бұрын
eotech helps with stigmatism . if its still bugging you the magnifyer will clear it
@ADudeAndSomeGuns4 күн бұрын
@@t.m9341 the 1x prism helps even more with an astigmatism
@EverythingFilmmaking3 күн бұрын
EOTECH reticle looks crazy good under a 3x magnifier
@t.m93413 күн бұрын
@@EverythingFilmmaking I want to try the 5x one but I don't know if eye relief going to be picky
@rdmanone2 күн бұрын
I've got two Eotechs. With my stigmatism I can't see either one of them. I purchased the Primary Arms sight and love it.
@sheepocalypse38982 күн бұрын
Not for me. Eotech is barely usable meanwhile a Sig Romeo 8H/8T, Promethean LP1, and ACSS holosuns are a lot less fuzzier to me.
@albertptran4 күн бұрын
Which suppressor cover is that on the 10.5? I’m using Manta Defense on my rifles and ar9
@ADudeAndSomeGuns4 күн бұрын
@@albertptran it was a browers. But I think they stopped making em. I like em a lot though. Heat resistant silicone.
@albertptran4 күн бұрын
Love your long range testing. I had fun doing headshots at 100 yards on steel with my 11” ar9 last month
@jillblake39166 күн бұрын
Great video!👍 We’re interested in partnering with you. Would you be open to discussing a collaboration?
@swenswenson5569 күн бұрын
What mag extensions are you running? Or are those the factory 23 rounders?
@randomawesomeness19999 күн бұрын
It may be known by this point but the second gen SLX scopes do have zero stops.
@tacfoley444310 күн бұрын
I recently bough a mint and boxed x12 with MOA graticule. I'm VERY happy with it, too.
@touxiong62512 күн бұрын
Ugh. I just bought a the 1st gen american predator. Months later the 2nd gen comes out, man it looks sweet!
@juanthelawnmowerthief164113 күн бұрын
Friends don’t let friends ATN…
@ADudeAndSomeGuns12 күн бұрын
@@juanthelawnmowerthief1641 lol.
@call_me_danger2 күн бұрын
Absolutely true. I used to be an atn fan, but after 2 scopes dying in less than a year and finding that my new agm 640 is much clearer than the atn 1280, I doubt I will even buy any from atn ever again.
@surreallife77713 күн бұрын
Hi I'm shooting a high-powered pellet rifle. Realistically most of the time I'm going to be shooting maximum 400 yards maybe 500 yards. In terms of a lightweight x-44 which model would you recommend and do you think having less elevation with the lightweight Scopes is going to be an issue at maximum 500 yards shooting. I'm not a hunter I'm a Target shooter / Marksmanship
@ADudeAndSomeGuns13 күн бұрын
I’m not really sure how much elevation you’d need for a pellet gun, and at those distances. I’d imagine you want max elevation…
@surreallife77713 күн бұрын
@@ADudeAndSomeGuns Thanks. So you don't think the lightweight Arken scopes would work?
@ADudeAndSomeGuns13 күн бұрын
@@surreallife777 how much elevation do you need at 500?
@surreallife77713 күн бұрын
@@ADudeAndSomeGuns I'm not sure I'll look into it
@tylergoldstein14 күн бұрын
Was yours the new “mil” weight?
@ADudeAndSomeGuns13 күн бұрын
@@tylergoldstein nah. Regular Ti weight.
@surreallife77714 күн бұрын
Why l'll never use the Arken SH4 Gen 2 4-16x50mm scope. KZbin The Social regressive. Scroll forward to the 12-minute mark. Perhaps the Japanese glass is better? He returned one of his Scopes and they gave him another one it was a little bit better but still not usable. Have you noticed any problems shooting in bright sunlight chromatic aberration?
@surreallife77714 күн бұрын
Why l'll never use the Arken SH4 Gen 2 4-16x50mm scope. KZbin. Scroll forward to the 12-minute mark. He returned one of his Scopes and they gave him another one it was a little bit better but still not usable. Have you noticed any problems shooting in bright sunlight chromatic aberration?
@ADudeAndSomeGuns14 күн бұрын
Never had an arken that was unusable.
@surreallife77714 күн бұрын
@ADudeAndSomeGuns I think he just had a bad luck with a series of Scopes that were somehow had bad glass.
@ADudeAndSomeGuns13 күн бұрын
@@surreallife777sounds like it. Maybe they had a bad batch of scopes and he got both from there. Only issue with Arkens I’ve run into was turret caps coming loose on the earlier gens.
@surreallife77713 күн бұрын
@@ADudeAndSomeGuns yes that's exactly what I thought. Thanks.
@Colorado4x414 күн бұрын
Thanks for the video. What bipod and mount do you recommend for this build? Just picked up a Howa 1500 with this
@ADudeAndSomeGuns14 күн бұрын
@@Colorado4x4 Harris bipod. If you have the budget atlas bipods are solid.
@Colorado4x414 күн бұрын
@@ADudeAndSomeGuns Thanks! What mount do you recommend?
@ADudeAndSomeGuns14 күн бұрын
@@Colorado4x4 scope mount? Depends on your budget. I really like badger ordinance, area 419, that being said I’ve used the mounts that came with my Arken scopes and they work too. But gun to my head I’m getting badger/area 419/spuhr
@Colorado4x414 күн бұрын
@@ADudeAndSomeGuns thanks! I’m going to order ARC M10 scope rings I think and then an Area 419 brake. What do you recommend to mount the bipod? I appreciate your help!
@ADudeAndSomeGuns13 күн бұрын
@@Colorado4x4 I just put a pic rail on the forend and I had the pic rail version Harris. Clips on. You could go arca and for that I believe 419 makes an arca adapter for Harris as well. I know they make them for the atlas bipods.
@DaltonAerialPhotography15 күн бұрын
Having the red dot on the same mount as your main optic is pointless. if you lose one 0 your lose both 0's
@xambezy15 күн бұрын
marking your zeros:
@ADudeAndSomeGuns15 күн бұрын
@@DaltonAerialPhotography the point of an offset red dot is not to have a separately zeroed optic. But ok 👍
@davephilpott454315 күн бұрын
The best setup
@aquadonkey.16 күн бұрын
Is the brass good for reloading? Been finding a ton of it lately
@JM1034416 күн бұрын
You do a stellar review. Thank you.
@ADudeAndSomeGuns16 күн бұрын
@@JM10344 thanks man. Appreciate it
@JM1034416 күн бұрын
I very much appreciate this. Ordered a LH-4 because I like low profile turrets. I really regretted not getting the Japanese glass and positive turrets. You put my mind to ease that i got the right one for myself.
@dawitkbethel584916 күн бұрын
Click. Click. Click. 😅
@thuan123red17 күн бұрын
Is it accurate?
@ADudeAndSomeGuns17 күн бұрын
@@thuan123red getting around 1”. Not bad. Not great. Still need to try out some hornady eldm 140s through it.
@pawelzieba841619 күн бұрын
What optic mount company and 12o clock position adapter do you use. Because I would like to mount a 12o clock position HE509t optic on it.
@DR-hc4im19 күн бұрын
Looks excellent
@556online20 күн бұрын
One thing you said that I don’t agree with is that HRF is the budget friendly option. 57 bucks for a piece of 3d printed plastic is not budget friendly, especially when they break so easily. If anything it’s an overpriced rip off. Btw I have the PMM and it’s held up without any issue in the past 12 months on a rifle I beat the shit out of.
@ZanderBramble20 күн бұрын
Designed for kids
@Swampytheroot21 күн бұрын
Try something like Federal Shortie that stretch that a stroke or two at the same power factor
@technicaldifficulties252221 күн бұрын
I'm looking at $240 shipped for 1k rounds. What are ya'll payin?
@FPSKai12 күн бұрын
Same, I’m curious to know as well.
@fullyautoChair11 күн бұрын
210 sale right now
@kamikazelyricist156321 күн бұрын
Mine is on the way! Can't wait! Great review! You have a new subscriber here.
@ADudeAndSomeGuns21 күн бұрын
Awesome dude thanks! You’re gonna like it
@ianaquila185822 күн бұрын
Love it. I’ve got a p/w 13.5 Armalite AR10A with a 1-10 and it’s a beast. It has waaaay more ass left than people think.
@ADudeAndSomeGuns21 күн бұрын
@@ianaquila1858 shorty 308 gang rises
@shirolee23 күн бұрын
Thanks for making this video! PMM it is!
@ADudeAndSomeGuns23 күн бұрын
@@shirolee you’re gonna like it.
@justincase690824 күн бұрын
Have you tried MDT Mags? Curious if they’re any better
@ADudeAndSomeGuns24 күн бұрын
@@justincase6908 I’ve shot with some of the best shooters there are and they only use metal. For a reason. The plastic mags just don’t hold up to serious use
@jockdeeznutz24 күн бұрын
What tripod are you using?
@jockdeeznutz24 күн бұрын
Cool! Currently building a 12.5" 308 using Aero M5 lower. Nice to know how far this can reach.
@ranierrentas481824 күн бұрын
Dont waste the money on the Scar. My opinion!
@ADudeAndSomeGuns24 күн бұрын
@@ranierrentas4818 I know I know. There’s just something about them…..
@suprafastmafc24 күн бұрын
Far as I'm aware, barrel length should have no real affect on accuracy. Assuming everything is dialed in.
@ADudeAndSomeGuns24 күн бұрын
Correct. Shorter barrels can sometimes help. More rigid.
@suprafastmafc24 күн бұрын
@@ADudeAndSomeGuns For sure helps with whip. But simple things can be tweaked to work around this (on longer barrels). I think the main thing is having a quality barrel, and then making tweaks to load development, ect to dial it in. But run a gun you just throw whatever ammo into, I think the shorter barrel would be at an advantage in accuracy if it were put agains an identical but longer barrel in the same scenario. Granted, different load will likely have different grouping POI, but that's another thing.