Around The Home

Пікірлер

@nightlighton 18 сағат бұрын

I will never buy crap Halo lights again. Every time the power goes out i can't get the dimmer switch to connect and work. I finally gave up trying tk connect the damn dimmer.

@AroundTheHome1 18 сағат бұрын

They are not crap. They are just not made for dimmer switches. Yes they can be used with dimmers, but the whole idea is to be switched over form the spot light to the halo ring with a regular switch.

@zaraheart Күн бұрын

This is the one we had. It stopped closing softly and part of the underside is scratched a lot and there’s crap(literal) stuck in it, gross lol(under the seat)So we have an elongated one and I got a mayfair version but they look almost identical. I have no idea how to install one. Usually my dad did it and now that I’m married my husband does it but I want to do it myself now lol

@AroundTheHome1 18 сағат бұрын

So, what I got from this is that you have a lot of poop on you toilet seat??

@susandouglas Күн бұрын

Thank you

@AroundTheHome1 Күн бұрын

You're welcome

@FuriousEevee93 Күн бұрын

What do you recommend for the base of the crockpot? I don’t know how to clean it I had a lot of stuff spill and create a lot of residue in there.

@SparkleinSac 2 күн бұрын

Did your use the bleach water for the dirty areas, but then use soap afterwards?

@AroundTheHome1 Күн бұрын

In my situation it was kind of everywhere, so I used bleach for the whole floor. While bleach is technically a soap, it's not a good smelling one. If you do use a soap afterwards you have to be absolutely positive that it will not react negatively with the bleach. Especially anything containing ammonia. The best thing to do is just rinse it really, really good with just plain water.

@Whitey56. 2 күн бұрын

I have my SIL’s Dc10 here with a stuck tube, now I have caressed, massaged , prodded,poked,pushed,pulled, spoked harshly and softly to it, swore at it even and it won’t come off, next step is a hacksaw and a new tube. Btw, someone has fiddled with replacing the button on the tube before I got it. Thanks for the video.

@AroundTheHome1 2 күн бұрын

Well, I actually don't know what to say. Good luck?..?!

@Whitey56. 2 күн бұрын

@ hacksaw did the job.

@akhere4279 3 күн бұрын

After factory reset, how much time does it take fridge to cool or feel cool at 35f? My fridge has same tab and not cooling upper portion.. tray inside at bottom is cooling.. and freezer is working too.. Will this factory reset fix the issue?

@AroundTheHome1 2 күн бұрын

Well, actually mine stopped cooling altogether. Sounds like yours might be froze up. I would suggest moving the food to a cooler or something to keep it safe and then do this. Unplug the fridge then open the back panel. Clean the coils off with either a vacuum or a blower, and with the doors open let it thaw all the way out overnight. Doing a factory reset after doing this would probably be good too. I hope this helps and good luck.

@darknes7800 4 күн бұрын

Naw....sell that small house and buy one with 8' tall garage doors and a 4 car garage........

@AroundTheHome1 2 күн бұрын

Ok, help me make it big on KZbin and I will

@darknes7800 2 сағат бұрын

YT is not the answer.....hard work is !

@lettyletty5218 4 күн бұрын

I got the window down and out but it seems I need to pull the top window and I can't how do I get the top window down

@AroundTheHome1 2 күн бұрын

This was for a single hung window. If both the lower and upper part of your window open then you have a double hung and it is quite different.

@lesleyhiddins2067 4 күн бұрын

Another older lady here, thanks very much. Excellent and easy to follow guide. Removed the jammed cord and now I just have to find the pack of new cord . . . now where did I leave that???

@AroundTheHome1 2 күн бұрын

Glad I could help, and good luck finding the cord!

@kathylloyd5070 5 күн бұрын

Can’t wait to try this!

@AroundTheHome1 2 күн бұрын

I hope it works for you. Let me know if you have any questions!

@StephanieArias-h1z 5 күн бұрын

So helpful! Thanks so much!! Lifesaver!

@AroundTheHome1 2 күн бұрын

You are very welcome, glad to help!

@sundiatakeitadude2177 5 күн бұрын

5:04 "When you think of this like a samurai sword" My weeabo form activated and I muscle memory'ed myself to remember the kyokushin karate front stance before you took the stance XD.

@milmil6594 9 күн бұрын

Thanks for the review..for as much as the EGO battery cost sure a person would hope to find a comparable replacement but trying to match quality and performance sometimes isn't worth the risk..i would rather have the quality and that 70 dollar difference seems more like aggravation and not worth it to me..i was tempted to go the route but glad i didn't..might be ok for a weed eater though..

@jizzervirusreptikonski8756 9 күн бұрын

didn't show how to adjust that hdd

@daisylucas2284 10 күн бұрын

thank you very much, it was of great help!

@AroundTheHome1 10 күн бұрын

You are very welcome, glad to help.

@kevin2298 11 күн бұрын

I have a red pex line on my hot water under the sink & i have no idea on how to even remove it to replace it, because it has a small hole in it

@anthonypierre2094 12 күн бұрын

Have this same model, it's 5 yrs old. Lost all my food to this issue. Tried the rest it didn't work. Cleaned out the back, especially the coil (it's delicate, be careful) it's the main thing back there covered with dust and it worked! It's working great now! 1st I wanted to bash the product but honestly I have not cleaned it in 5yr and I had it all the way back against the wall with not much room for circulation.

@AroundTheHome1 11 күн бұрын

When you cleaned it, did it look like this? kzbin.info/www/bejne/bWrTn3t5bayAf9k

@PickyPippi 12 күн бұрын

I absolutely hate this vacuum. Very counterintuitive for dumping.

@RadovanNikolic-q7n 12 күн бұрын

Thanks for the great video. I have problem lifting the sleeve up, can't move it at all. Any advise how to remove the sleeve?

@AroundTheHome1 12 күн бұрын

You could carefully get a small flat screwdriver in there to get it started. Carefully is the important part so you don't end up damaging anything.

@RadovanNikolic-q7n 12 күн бұрын

Tried that, didn’t move a bit. Thanks for replying

@jizzervirusreptikonski8756 13 күн бұрын

What sled to buy?

@potraf26 13 күн бұрын

I just got this. My long screw that goes into the handle that keeps the cords organized is very loose, like I can pull it out. Is yours that loose or is it tight?

@Peter-Du 13 күн бұрын

Excellent, I used a pipe wrench in place of the pliers. Thanks.

@AroundTheHome1 13 күн бұрын

Yes, that's even better for one that's really stuck.

@eaa343 6 күн бұрын

@@AroundTheHome1 First try...pipe wrench and small sledge.....will not come loose from seat...second try tomorrow

@rishop07 14 күн бұрын

Thank you for the awesome video demonstration! Question, how long should the string be before loading?

@AroundTheHome1 13 күн бұрын

14' of .095 line like this one www.amazon.com/EGO-AL2470B-Premium-bi-Component-Trimmer/dp/B0BRTK5X69?crid=2W0AIDQSJQUAU&dib=eyJ2IjoiMSJ9.NScEb3f3YU1epVM8nnjiWwXJ261uGAOZHI9Mysohc8zzBdFHyRHDFo-g5XXchkSXQcEuzCKnzKKDelhKCODgLpwbJAuV41-EUzxLWHoc9rGDvU0aeKEeeUuETWXaiiQWQ6PguajkYn9byVK8TMVcWfO7Z6waUgP16oDXUtHBBR-BrOpDrrX6TgF1mo17rBku8qvwVHbzLd8SGqS92Otx066fdY_8kCwm9n7eNFDO6C4.9TRAUrHu2xmHJ_laywwHOqQZkIL1qZt9kAmaaLXf8QQ&dib_tag=se&keywords=string%2Btrimmer%2Bline&qid=1737467971&sprefix=string%2Btrimmer%2Caps%2C138&sr=8-13&th=1&linkCode=ll1&tag=greatwhitenin-20&linkId=a8fef17e4a13ca1265c23d419a1fd258&language=en_US&ref_=as_li_ss_tl

@rishop07 13 күн бұрын

@AroundTheHome1 appreciate it! 👍

@rustyh1686 14 күн бұрын

I can't believe people need to be shown how to open a bag😂

@johntexan4165 14 күн бұрын

Can you have a hose on the drain and use the wet-vac as a pump? I need to vacate 200G of water from an aquarium and don't want to wait for gravity to do it.

@AroundTheHome1 13 күн бұрын

Well I don't think so. Since this is a vac, and not a pump, as soon as you open the drain plug while it is running it will suck from that point as well.

@joycenielsen4462 14 күн бұрын

I am having the same problem. I just got the V 12 for a Christmas gift. From the beginning, it was hard to remove the wand. I was able to use the vacuum, remove the tube to empty the bin, put the tube back. Now, I cannot remove the tube at all. I tried your suggestions, but the tube does not budge. I am so frustrated!!!

@whereisthedollar 14 күн бұрын

Thanks. Worked for me.

@jamesmckenzie1266 14 күн бұрын

Thanks man

@tomjones4318 15 күн бұрын

The shroud may help keep dirt away from the cylinder extension and seal so it slides in clean and lasts longer. My 20 year old cheapo has disintegrated but amazingly the cylinder's still good. I just realized I can use it on my replacement chair with a failed cylinder.

@elilieberman5664 15 күн бұрын

Well described! Before removing the mount from the wheel base I applied wd-40, may make it easier

@IdahoRCMan 16 күн бұрын

Thanks man, borrowed this exact one from some dude down the street and he didn't have any instructions on this machine. Appreciate it!

@user-cw6ni3xq5d 16 күн бұрын

Thank you! I think part of my issue is that it appears I lost a screw right at the back bottom of the head (if you're looking at the pivot pin, just above and closer to the back of the machine). Do you know what screw I can buy to replace this with?

@AroundTheHome1 16 күн бұрын

I am not 100% sure which screw that you are describing, but here is a website that has most of the parts for your mixer. www.ereplacementparts.com/ Good luck getting it fixed.

@nottheguru1 16 күн бұрын

How do you clean them after they been used? It must be difficult no?

@AroundTheHome1 16 күн бұрын

Drop it in the dishwasher. And not after every use, but when it starts getting greasy it will clean right up. I have put mine in there dozens of times, keeps working great.

@nottheguru1 16 күн бұрын

@ thx

@AXHEJAZ 16 күн бұрын

Excellent video thank you brother

@AroundTheHome1 16 күн бұрын

My pleasure

@terrysentell1541 16 күн бұрын

So if you put in a 20 amp outlet you will need a 20 amp circuit breaker correct?

@AroundTheHome1 16 күн бұрын

No, not at all. The 20 amp outlet is just a higher quality, more heavy duty outlet. If you are on a 15 amp breaker the breaker will still pop if more then 15 amps is pulled, it just means that the outlet will more then handle the strain. A standard 15 amp outlet costs less then $1, while the 20 amp costs like over $3. There are just better components in it so that is why I recommend using it when you have a very high amp pulling device like a heater. The outlet isn't pulling the power, just the device. I hope that makes sense.

@Eli-jw8mx 16 күн бұрын

Oh man I was hoping this video would show how to take the actual blades out I can’t seem to figure out how to get those two screws loose .

@AroundTheHome1 16 күн бұрын

Yeah, maybe I should have done that. I was just afraid that if I did that then people would be like why didn't I also take the motor off too. So I stopped there on purpose because you can easily take a rag and wipe the blade off. Also, there is more then one type of retainer for these blades. Some have a set screw on the side, others have a spring clip inside the blade so all you do is pull it off.

@Eli-jw8mx 15 күн бұрын

@ no worries I ended up just using high air pressure and it seemed to do the trick.

@lutkeone 16 күн бұрын

Question about changing oil on chainsaw. If i am not using chainsaw for a while to drain old oil from chainsaw. From where? Should it be drained from same area where it was provided?

@AroundTheHome1 16 күн бұрын

Well I have to ask you a question. What kind of motor is on your saw? This is obviously an electric saw, but I also have a Husqvarna saw as well. The Husqvarna is a two stroke motor so there is no oil reservoir to change out. Only 4 stroke motors have that. Is yours a two stroke or a 4 stroke?

@lutkeone 16 күн бұрын

Not sure. Two stroke

@christinaaispuro4477 17 күн бұрын

Thank you! Very helpful.

@AroundTheHome1 16 күн бұрын

Glad it was helpful!

@johnalbert7846 17 күн бұрын

i watched your video prior to actually making the change of my chair cylinder....basically i am generally pretty mechanically inclined... however with that said, i believe for sure that with the help of you... and your video demonstration....it made changing the cylinder a whole lot easier for me by knowing how to do it and what to expect as i was doing it. i probably couldn't have done it as easily without first watching you perform the task with your very well done video. thank you : )

@AroundTheHome1 16 күн бұрын

You are very welcome, thanks for watching!

@deanyanko3326 17 күн бұрын

Hang on sloopy,sloopy hang on ... shrinkage ?

@AroundTheHome1 16 күн бұрын

Sure, the more water you add does increase the shrinkage. That's why you add in stages so that your first coat, also your thickest coat, has the least water.

@JDaniel-jg7pi 19 күн бұрын

🐐 thank you

@AroundTheHome1 16 күн бұрын

You are very welcome.

@alexsartorio 19 күн бұрын

Muito obrigado! do Brasil

@AroundTheHome1 16 күн бұрын

De nada. Obrigado por assistir do Brasil!

@tofan0111 20 күн бұрын

How to disassemble and clean the second small attachment with a roller?

@naiemzamdin9823 20 күн бұрын

i just received mine but the brush is driving in reverse any solution

@cynthiaschlueter1489 22 күн бұрын

January 11,, 2025 I am a grandma in a seniors home and my pin came out and I had no help so I looked here and vola! it is fixed! Your instructions were easy to follow thank you from Edmonton Alberta Canada.

@AroundTheHome1 22 күн бұрын

So glad I could help you! Thanks for watching in Canada.