RoutledgeElectrical

Пікірлер

@Pitbikercrf125 Жыл бұрын

The cutting of that plastic conduit was the most painful thing I’ve ever watched, also the fixing of a clip to plasterboard with a 40mm wood screw no plug is questionable, your teaching people here the amount of information you can portray via video is limitless fixing of conduit is probably more relevant than most of the jargon he’s talking about , teach someone why not how ……😮

@mts7274 Жыл бұрын

Run/Start capacitors need to function in a specific 'MFD' range. This test only shows whether or not the capacitor can carry a charge.

@train4905 2 жыл бұрын

Exellent chriss ,,thanku

@jonathanjoestar__ 2 жыл бұрын

anyone else from wycombe college here lol nice video tho m8

@AUBERGINEize 2 жыл бұрын

I’ve never worked on an installation where the specification stated that a rotary isolator shall be installed above a 13amp dsso.

@Woodkin007 2 жыл бұрын

Is he Drunk?

@nguyenthithanhnga7744 2 жыл бұрын

Character In the video It's great, I like it a lot $$

@duypham3206 2 жыл бұрын

Very good and funny videos bring a great sense of entertainment!

@thuynguyen-vf7nu 2 жыл бұрын

Character In the video It's great, I like it a lot $$

@speeka9850 3 жыл бұрын

Gs38 with a big metal padlock in the way? Mate!

@michaelcostello6991 3 жыл бұрын

Good demonstration. Is there a max value for R1+Rn I mean if there is a short between Live and neutral the breaker must also trip safely ??

@bramcoteelectrical1088 Жыл бұрын

No you just make sure you have continuity on live and Neutral. Value will be same for each conductor as both same physical size so max value wont really apply.😮

@stevemackay4965 3 жыл бұрын

Think it would be good tor a basic test if he did not mumble

@faisalmohamed8522 3 жыл бұрын

What is the name of the equipment?

@harundoe1 3 жыл бұрын

Sir could you please tell me which device you using for test circuit breakers, I am a beginner (just finished 1 weeks and still study) ) so you can share with me,... Thank you so much to share this video

@davidreynolds4684 3 жыл бұрын

Was that a charged cap?

@jviews1 3 жыл бұрын

To summarize: discharge cap by shorting the leads. Use OHMS setting to "charge a little". Use DC volts to see if help some charge and discharging slowly back to zero. Best to use a capacitance measurement tool after this first test. DO NOT FORGET TO DISCHARGE FIRST AND NOT HOLD BY HANDS. USE ALLIGATOR CLIPS.

@Roadsurfer2k11 3 жыл бұрын

I saw another video using uF cap setting on meter but mine showed 0.L. Not sure why.. maybe because it's a filter capacitor? It's brand new rated 20V 15000uF for a pinball machine

@jessjohnson-rocks 2 жыл бұрын

480v AC running 1,000 watt high pressure sodium lamps in the parking lot lights at Meijers stores have core & coil ballast with a remote ignitor and capacitor. When replacing a bad ballast I would always show an apprentice how the cap stores enough voltage to ruin your day by, having a short piece of SJO cord with 2 alligator clips and a female cord end, and plugging in an old Milwaukee 1/2" drill and running the drill off just the cap for approximately 45 seconds, (after just de-energizing fixture). Apprentices have a little more respect for electricity after seeing that, and not too many have been hit by a live cap afterward either.

@sumanag7343 3 жыл бұрын

I searched many vedios i notbubdestand clearly now until I got this vedio and watched and now undestood clearly I say thanks in my whole heart ❤️

@RageQuitter1 3 жыл бұрын

That db looks to be fed by an armoured cable. Isn’t it pointless disconnecting that earth when the gland of the swa is probably providing a parallel earth path back to the met?

@tlangdon12 2 жыл бұрын

No, it's not pointless. The SWA might be providing a parallel earth path, back to the MET, but the test that Chris is doing is not using the SWA at all. The path of the current that is flowing is from the transformer to the live terminal in the board, through the test meter to the earth wire that Chris has disconnected from everything other than the MET, then via the MET back through the earth to the transformer. The SWA is not part of the current flow as only one end of it is in the circuit. (It would need both ends to be part of the circuit to create a parallel path).

@janmuhammad1935 3 жыл бұрын

I appreciate your vedios thanks a lot of experience in electrical installation

@andybrown9178 3 жыл бұрын

Great videos!

@seandempsey9396 4 жыл бұрын

I think there's something wrong with your test if you short out the socket with or without the adapter you will trip the RCDS/ RCBOs? So what the trick. I have tried it and yes the RCD TRIPED. Update, I have watched the video again I realised that the mcb for the circuit being tested was infact turned off. So I apologise for the criticism, I have never seen this test carried out like that before, must remember how to do it fab

@yeetgames9132 4 жыл бұрын

Thanks for the vid. Loving the position of the socket directly below some sort of water services???

@michaellack5139 4 жыл бұрын

Never trust a capacitor.....I had to replace a capacitor in a psu years ago and held its charge....screw driver across the terminals and melted half my screwdriver and a loud bang...

@electrickal1 4 жыл бұрын

You failed one minute in!! You need to test between all live conductors and earth, neutral is deemed as a live conductor and as that is a three-phase installation you should have tested L1 to N, L2 to N, L3 to N, L1 to earth, L2 to earth, L3 to earth, L1 to L2, L2 to L3 and L1 to L3. Any isolator is more than capable of failing to open all its poles and I have seen it in the past!

@fredsapplianceacademy 4 жыл бұрын

appliance.academy

@shashikiransailla9816 4 жыл бұрын

Osm!!!

@train4905 4 жыл бұрын

Excellent demo Chris .thankyou kindly.

@pawanbirdee8108 4 жыл бұрын

How can v check voltage drop

@paulgerrard2529 4 жыл бұрын

If their is no neutral to the three phase board do you use two of the phases ?

@rossmurdoch1886 3 жыл бұрын

There not their and definitely not Line to Earth, it's an Earth fault loop

@MrBradleya16 4 жыл бұрын

is this playlist relevant in 2019?

@valyardelean 4 жыл бұрын

One of the best example of Ze test on KZbin.

@rcairtechuk5695 4 жыл бұрын

Opps bad practise to pull plug out off wall without switching of power thats a bit naughty

@train4905 4 жыл бұрын

Dear sir,that is absolutely brilliant.thankyou so much indeed.that is a superb method.thankyou loads,this has helped mi out loads.Cher's Steve.

@train4905 4 жыл бұрын

Spot on sir.thankyou

@dustprogamernew2048 5 жыл бұрын

"I'm getting older while being taught all the time" Solon the Athenian philosopher

@Desi_d7j 5 жыл бұрын

Sir ; U r salt of this earth : Hat Off for your work

@naldrus6418 5 жыл бұрын

Not a clear demo only those who know a little bit of electrical can catch up with that demo

@abdullahhomood2565 5 жыл бұрын

Hi, I have an issue if you can help in diagnosing my issue please. I have a washing machine which stopped working suddenly. I checked the capacitor and found that it has power on the outer shell. Do I have to replace it? Thanks

@dextergodfrey7086 5 жыл бұрын

Useful, nice demonstration to be honest. Job done!

@razramon4898 5 жыл бұрын

It's important the scale on ohms and dc voltage? mine is not autoscaled.

@user_i.d 5 жыл бұрын

How comes he didn't turn off the MCB's first before turning off the Main switch

@paulmorrey733 5 жыл бұрын

Thanks

@martyn5939 5 жыл бұрын

You didn't ask permission before isolating

@naldrus6418 5 жыл бұрын

Not clear enough... Not helpful.. naaahhhhh.

@MichelLinschoten 5 жыл бұрын

If you cannot comprehend this simple video , do not touch a multi meter. I will explain what he is doing, allow me, late but still...he puts it to OHM to "charge" the capacitor a little bit, then sets it to VOLT to see if it discharged (hence working properly)

@monkeyking3161 5 жыл бұрын

Thanks! Much appreciated

@sonnyh4173 5 жыл бұрын

Why the people are so rude ? If you don't have a capacitor meter this simple step can tell if the capacitor can hold and discharge then it is still good.